From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Kuangyi Chiang <ki.chiang65@gmail.com>
Cc: hansg@kernel.org, mchehab@kernel.org,
linux-media@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] media: uvcvideo: Add UVC_QUIRK_CTL_MSG_DELAY_1M for HIK camera
Date: Thu, 29 Oct 2026 10:56:10 +0200 [thread overview]
Message-ID: <20261029085610.GC2673734@killaraus.ideasonboard.com> (raw)
In-Reply-To: <20261029033106.7374-1-ki.chiang65@gmail.com>
On Thu, Oct 29, 2026 at 11:31:06AM +0800, Kuangyi Chiang wrote:
> UVC control requests issued when preparing a video stream sometimes
> time out on the HIK 1080P Camera (2bdf:0280):
>
> [ 48.363671] uvcvideo: Found UVC 1.00 device HIK 1080P Camera (2bdf:0280)
> [ 53.465662] uvcvideo: Failed to set UVC probe control : -110 (exp. 26).
> [ 58.585653] uvcvideo: Failed to query (129) UVC probe control : -110 (exp. 26).
> [ 58.592967] uvcvideo: Failed to initialize the device (-5).
>
> Adding a 1ms delay after each control message avoids the issue.
>
> Introduce UVC_QUIRK_CTL_MSG_DELAY_1M for this device.
We don't add random delays. This needs a root cause analysis.
> Signed-off-by: Kuangyi Chiang <ki.chiang65@gmail.com>
> ---
> drivers/media/usb/uvc/uvc_driver.c | 9 +++++++++
> drivers/media/usb/uvc/uvc_video.c | 10 ++++++++--
> drivers/media/usb/uvc/uvcvideo.h | 1 +
> 3 files changed, 18 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/media/usb/uvc/uvc_driver.c b/drivers/media/usb/uvc/uvc_driver.c
> index e289cc7..c720d75 100644
> --- a/drivers/media/usb/uvc/uvc_driver.c
> +++ b/drivers/media/usb/uvc/uvc_driver.c
> @@ -3162,6 +3162,15 @@ static const struct usb_device_id uvc_ids[] = {
> .bInterfaceSubClass = 1,
> .bInterfaceProtocol = 0,
> .driver_info = UVC_INFO_QUIRK(UVC_QUIRK_FORCE_BPP) },
> + /* HIK 1080P Camera */
> + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
> + | USB_DEVICE_ID_MATCH_INT_INFO,
> + .idVendor = 0x2bdf,
> + .idProduct = 0x0280,
> + .bInterfaceClass = USB_CLASS_VIDEO,
> + .bInterfaceSubClass = 1,
> + .bInterfaceProtocol = 0,
> + .driver_info = UVC_INFO_QUIRK(UVC_QUIRK_CTL_MSG_DELAY_1M) },
> /* Insta360 Link */
> { .match_flags = USB_DEVICE_ID_MATCH_DEVICE
> | USB_DEVICE_ID_MATCH_INT_INFO,
> diff --git a/drivers/media/usb/uvc/uvc_video.c b/drivers/media/usb/uvc/uvc_video.c
> index fc3536a..4667f86 100644
> --- a/drivers/media/usb/uvc/uvc_video.c
> +++ b/drivers/media/usb/uvc/uvc_video.c
> @@ -35,13 +35,19 @@ static int __uvc_query_ctrl(struct uvc_device *dev, u8 query, u8 unit,
> {
> u8 type = USB_TYPE_CLASS | USB_RECIP_INTERFACE;
> unsigned int pipe;
> + int ret;
>
> pipe = (query & 0x80) ? usb_rcvctrlpipe(dev->udev, 0)
> : usb_sndctrlpipe(dev->udev, 0);
> type |= (query & 0x80) ? USB_DIR_IN : USB_DIR_OUT;
>
> - return usb_control_msg(dev->udev, pipe, query, type, cs << 8,
> - unit << 8 | intfnum, data, size, timeout);
> + ret = usb_control_msg(dev->udev, pipe, query, type, cs << 8,
> + unit << 8 | intfnum, data, size, timeout);
> +
> + if (dev->quirks & UVC_QUIRK_CTL_MSG_DELAY_1M)
> + usleep_range(1000, 2000);
> +
> + return ret;
> }
>
> static const char *uvc_query_name(u8 query)
> diff --git a/drivers/media/usb/uvc/uvcvideo.h b/drivers/media/usb/uvc/uvcvideo.h
> index b6bcee4..1426d14 100644
> --- a/drivers/media/usb/uvc/uvcvideo.h
> +++ b/drivers/media/usb/uvc/uvcvideo.h
> @@ -81,6 +81,7 @@
> #define UVC_QUIRK_INVALID_DEVICE_SOF 0x00010000
> #define UVC_QUIRK_MJPEG_NO_EOF 0x00020000
> #define UVC_QUIRK_MSXU_META 0x00040000
> +#define UVC_QUIRK_CTL_MSG_DELAY_1M 0x00080000
>
> /* Format flags */
> #define UVC_FMT_FLAG_COMPRESSED 0x00000001
--
Regards,
Laurent Pinchart
next prev parent reply other threads:[~2026-10-29 8:56 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-29 3:31 [PATCH] media: uvcvideo: Add UVC_QUIRK_CTL_MSG_DELAY_1M for HIK camera Kuangyi Chiang
2026-10-29 8:56 ` Laurent Pinchart [this message]
2026-11-03 1:08 ` Kuangyi Chiang
2026-10-29 12:46 ` Hans de Goede
2026-11-03 1:18 ` Kuangyi Chiang
2026-11-05 9:33 ` Michal Pecio
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261029085610.GC2673734@killaraus.ideasonboard.com \
--to=laurent.pinchart@ideasonboard.com \
--cc=hansg@kernel.org \
--cc=ki.chiang65@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.