[PATCH rtw-next v2 3/7] wifi: rtw88: correctly expose beamformee capabilities

[Ho Jie Feng <hjf3108@gmail.com>]

From: Jie Feng <hjf3108@gmail.com>

Make MU and SU capability flags each depend on the chip declared
maximum instead of setting both flags together.

Signed-off-by: Ho Jie Feng <hjf3108@gmail.com>
---
 drivers/net/wireless/realtek/rtw88/main.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/realtek/rtw88/main.c b/drivers/net/wireless/realtek/rtw88/main.c
index f7d7b66844862ff01533b8b640ed35738169673d..0a1b5575b729981b34e0fa9c37a4f8380987afa4 100644
--- a/drivers/net/wireless/realtek/rtw88/main.c
+++ b/drivers/net/wireless/realtek/rtw88/main.c
@@ -1605,6 +1605,7 @@ static void rtw_init_ht_cap(struct rtw_dev *rtwdev,
 static void rtw_init_vht_cap(struct rtw_dev *rtwdev,
 			     struct ieee80211_sta_vht_cap *vht_cap)
 {
+	const struct rtw_chip_info *chip = rtwdev->chip;
 	struct rtw_efuse *efuse = &rtwdev->efuse;
 	u16 mcs_map = 0;
 	__le16 highest;
@@ -1623,10 +1624,13 @@ static void rtw_init_vht_cap(struct rtw_dev *rtwdev,
 		       0;
 	if (rtwdev->hal.rf_path_num > 1)
 		vht_cap->cap |= IEEE80211_VHT_CAP_TXSTBC;
-	vht_cap->cap |= IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE |
-			IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE;
-	vht_cap->cap |= (rtwdev->hal.bfee_sts_cap <<
-			IEEE80211_VHT_CAP_BEAMFORMEE_STS_SHIFT);
+	if (rtw_bf_support && chip->bfer_su_max_num) {
+		vht_cap->cap |= IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE;
+		vht_cap->cap |= rtwdev->hal.bfee_sts_cap <<
+				IEEE80211_VHT_CAP_BEAMFORMEE_STS_SHIFT;
+	}
+	if (rtw_bf_support && chip->bfer_mu_max_num)
+		vht_cap->cap |= IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE;
 
 	if (rtw_chip_has_rx_ldpc(rtwdev))
 		vht_cap->cap |= IEEE80211_VHT_CAP_RXLDPC;
-- 
2.55.0