From: Jongwon Lee <ai@linux.com>
To: Davidlohr Bueso <dave@stgolabs.net>,
Jonathan Cameron <jic23@kernel.org>,
Dave Jiang <dave.jiang@intel.com>,
Alison Schofield <alison.schofield@intel.com>,
Vishal Verma <vishal.l.verma@intel.com>,
Dan Williams <djbw@kernel.org>
Cc: Ira Weiny <iweiny@kernel.org>, Li Ming <ming.li@zohomail.com>,
Richard Cheng <icheng@nvidia.com>,
linux-cxl@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2] cxl/edac: Mask DPA flags in the event record cache key
Date: Sun, 01 Nov 2026 01:11:21 +0900 [thread overview]
Message-ID: <20261031161121.15948-1-ai@linux.com> (raw)
The low bits of the DPA in a General Media or DRAM event record are
flags: bit 0 is VOLATILE and bit 1 is NOT_REPAIRABLE. The trace events
report the DPA with CXL_DPA_MASK applied, but cxl_store_rec_gen_media()
and cxl_store_rec_dram() use the raw value as the xarray key.
User space reads the DPA from the trace event and writes it to the
mem_repair dpa attribute. If the record had any flag set, xa_load()
misses it and the repair fails with -EINVAL. The raw key also lets a
repair go through for a record the device marked NOT_REPAIRABLE, if the
DPA is written with bit 1 set.
Key the records by the masked DPA and skip records marked
NOT_REPAIRABLE.
Fixes: 0b5ccb0de1e2 ("cxl/edac: Support for finding memory operation attributes from the current boot")
Signed-off-by: Jongwon Lee <ai@linux.com>
---
Notes:
Changes in v2:
- Moved the Claude Code note below the --- (Dave Jiang)
This patch was developed with Claude Code.
Tested on QEMU master (b574eaf) with a CXL type 3 device, region
committed, KASAN and PROVE_LOCKING on. DRAM events injected with
cxl-inject-dram-event at 0x1001, 0x2000 and 0x3002, then a repair
requested through mem_repair0..4. Same result for all five:
DPA written before after
0x1000 -EINVAL ok
0x1001 ok -EINVAL
0x2000 ok ok
0x3000 -EINVAL -EINVAL
0x3002 ok -EINVAL
0x5000 -EINVAL -EINVAL
No KASAN, lockdep or WARN output. Only DRAM events were injected; the
General Media path has the same change but was not exercised. Not
tested on real CXL hardware.
drivers/cxl/core/edac.c | 25 +++++++++++++++++++------
1 file changed, 19 insertions(+), 6 deletions(-)
diff --git a/drivers/cxl/core/edac.c b/drivers/cxl/core/edac.c
index 34b81e8dfb..b3dfc33ca6 100644
--- a/drivers/cxl/core/edac.c
+++ b/drivers/cxl/core/edac.c
@@ -918,6 +918,21 @@ struct cxl_mem_repair_attrbs {
enum cxl_mem_repair_type repair_type;
};
+/*
+ * The low bits of the event record DPA are flags (VOLATILE, NOT_REPAIRABLE).
+ * Records are looked up by the DPA user space writes back, which comes from
+ * the trace event and has the flags masked off, so key them the same way.
+ */
+static unsigned long cxl_rec_key(const struct cxl_event_media_hdr *hdr)
+{
+ return le64_to_cpu(hdr->phys_addr) & CXL_DPA_MASK;
+}
+
+static bool cxl_rec_not_repairable(const struct cxl_event_media_hdr *hdr)
+{
+ return le64_to_cpu(hdr->phys_addr) & CXL_DPA_NOT_REPAIRABLE;
+}
+
static struct cxl_event_gen_media *
cxl_find_rec_gen_media(struct cxl_memdev *cxlmd,
struct cxl_mem_repair_attrbs *attrbs)
@@ -929,7 +944,7 @@ cxl_find_rec_gen_media(struct cxl_memdev *cxlmd,
return NULL;
rec = xa_load(&array_rec->rec_gen_media, attrbs->dpa);
- if (!rec)
+ if (!rec || cxl_rec_not_repairable(&rec->media_hdr))
return NULL;
if (attrbs->repair_type == CXL_PPR)
@@ -950,7 +965,7 @@ cxl_find_rec_dram(struct cxl_memdev *cxlmd,
return NULL;
rec = xa_load(&array_rec->rec_dram, attrbs->dpa);
- if (!rec)
+ if (!rec || cxl_rec_not_repairable(&rec->media_hdr))
return NULL;
validity_flags = get_unaligned_le16(rec->media_hdr.validity_flags);
@@ -1105,8 +1120,7 @@ int cxl_store_rec_gen_media(struct cxl_memdev *cxlmd, union cxl_event *evt)
return -ENOMEM;
old_rec = xa_store(&array_rec->rec_gen_media,
- le64_to_cpu(rec->media_hdr.phys_addr), rec,
- GFP_KERNEL);
+ cxl_rec_key(&rec->media_hdr), rec, GFP_KERNEL);
if (xa_is_err(old_rec)) {
kfree(rec);
return xa_err(old_rec);
@@ -1135,8 +1149,7 @@ int cxl_store_rec_dram(struct cxl_memdev *cxlmd, union cxl_event *evt)
return -ENOMEM;
old_rec = xa_store(&array_rec->rec_dram,
- le64_to_cpu(rec->media_hdr.phys_addr), rec,
- GFP_KERNEL);
+ cxl_rec_key(&rec->media_hdr), rec, GFP_KERNEL);
if (xa_is_err(old_rec)) {
kfree(rec);
return xa_err(old_rec);
--
2.55.0
next reply other threads:[~2026-10-31 16:11 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-31 16:11 Jongwon Lee [this message]
2026-10-31 16:22 ` [PATCH v2] cxl/edac: Mask DPA flags in the event record cache key sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261031161121.15948-1-ai@linux.com \
--to=ai@linux.com \
--cc=alison.schofield@intel.com \
--cc=dave.jiang@intel.com \
--cc=dave@stgolabs.net \
--cc=djbw@kernel.org \
--cc=icheng@nvidia.com \
--cc=iweiny@kernel.org \
--cc=jic23@kernel.org \
--cc=linux-cxl@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=ming.li@zohomail.com \
--cc=vishal.l.verma@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.