From: Johnny Liu <johnliu@nvidia.com>
To: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Thierry Reding <thierry.reding@kernel.org>,
Jonathan Hunter <jonathanh@nvidia.com>,
"Prashant Gaikwad" <pgaikwad@nvidia.com>,
Stephen Boyd <sboyd@kernel.org>,
Brian Masney <bmasney+clk@redhat.com>,
Jerome Brunet <jbrunet+clk@baylibre.com>,
"Douglas Anderson" <dianders@chromium.org>,
Aniruddha Rao <anrao@nvidia.com>, <devicetree@vger.kernel.org>,
<linux-tegra@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-clk@vger.kernel.org>
Cc: Johnny Liu <johnliu@nvidia.com>
Subject: [PATCH v3 3/4] firmware: tegra: bpmp: Add Tegra238 support
Date: Mon, 2 Nov 2026 12:12:01 +0000 [thread overview]
Message-ID: <20261102121202.2431928-4-johnliu@nvidia.com> (raw)
In-Reply-To: <20261102121202.2431928-1-johnliu@nvidia.com>
Tegra238 has its own BPMP compatible, "nvidia,tegra238-bpmp". Add
dedicated tegra238_soc data for it, including its EMC clock ID
(TEGRA238_CLK_EMC=43), and select it through the new compatible.
Also build bpmp-tegra186.o and the shared match table for
CONFIG_ARCH_TEGRA_238_SOC, so that a Tegra238-only configuration binds
the driver.
Signed-off-by: Johnny Liu <johnliu@nvidia.com>
---
drivers/firmware/tegra/Makefile | 1 +
drivers/firmware/tegra/bpmp.c | 9 +++++++++
2 files changed, 10 insertions(+)
diff --git a/drivers/firmware/tegra/Makefile b/drivers/firmware/tegra/Makefile
index 97f7a5db9d0a..21e87f3afffe 100644
--- a/drivers/firmware/tegra/Makefile
+++ b/drivers/firmware/tegra/Makefile
@@ -4,6 +4,7 @@ tegra-bpmp-$(CONFIG_ARCH_TEGRA_210_SOC) += bpmp-tegra210.o
tegra-bpmp-$(CONFIG_ARCH_TEGRA_186_SOC) += bpmp-tegra186.o
tegra-bpmp-$(CONFIG_ARCH_TEGRA_194_SOC) += bpmp-tegra186.o
tegra-bpmp-$(CONFIG_ARCH_TEGRA_234_SOC) += bpmp-tegra186.o
+tegra-bpmp-$(CONFIG_ARCH_TEGRA_238_SOC) += bpmp-tegra186.o
tegra-bpmp-$(CONFIG_ARCH_TEGRA_264_SOC) += bpmp-tegra186.o
tegra-bpmp-$(CONFIG_DEBUG_FS) += bpmp-debugfs.o
tegra-bpmp-$(CONFIG_SYSFS) += bpmp-sysfs.o
diff --git a/drivers/firmware/tegra/bpmp.c b/drivers/firmware/tegra/bpmp.c
index 5d97a8600fd1..06da888535dc 100644
--- a/drivers/firmware/tegra/bpmp.c
+++ b/drivers/firmware/tegra/bpmp.c
@@ -21,6 +21,7 @@
#include <soc/tegra/bpmp-abi.h>
#include <soc/tegra/ivc.h>
+#include <dt-bindings/clock/nvidia,tegra238.h>
#include <dt-bindings/clock/nvidia,tegra264.h>
#include <dt-bindings/clock/tegra234-clock.h>
@@ -1134,6 +1135,7 @@ static const struct dev_pm_ops tegra_bpmp_pm_ops = {
#if IS_ENABLED(CONFIG_ARCH_TEGRA_186_SOC) || \
IS_ENABLED(CONFIG_ARCH_TEGRA_194_SOC) || \
IS_ENABLED(CONFIG_ARCH_TEGRA_234_SOC) || \
+ IS_ENABLED(CONFIG_ARCH_TEGRA_238_SOC) || \
IS_ENABLED(CONFIG_ARCH_TEGRA_264_SOC)
#define TEGRA186_BPMP_SOC_COMMON \
.channels = { \
@@ -1163,6 +1165,11 @@ static const struct tegra_bpmp_soc tegra234_soc = {
.emc_clk_id = TEGRA234_CLK_EMC,
};
+static const struct tegra_bpmp_soc tegra238_soc = {
+ TEGRA186_BPMP_SOC_COMMON,
+ .emc_clk_id = TEGRA238_CLK_EMC,
+};
+
static const struct tegra_bpmp_soc tegra264_soc = {
TEGRA186_BPMP_SOC_COMMON,
.emc_clk_id = TEGRA264_CLK_EMC,
@@ -1196,9 +1203,11 @@ static const struct of_device_id tegra_bpmp_match[] = {
#if IS_ENABLED(CONFIG_ARCH_TEGRA_186_SOC) || \
IS_ENABLED(CONFIG_ARCH_TEGRA_194_SOC) || \
IS_ENABLED(CONFIG_ARCH_TEGRA_234_SOC) || \
+ IS_ENABLED(CONFIG_ARCH_TEGRA_238_SOC) || \
IS_ENABLED(CONFIG_ARCH_TEGRA_264_SOC)
{ .compatible = "nvidia,tegra186-bpmp", .data = &tegra186_soc },
{ .compatible = "nvidia,tegra234-bpmp", .data = &tegra234_soc },
+ { .compatible = "nvidia,tegra238-bpmp", .data = &tegra238_soc },
{ .compatible = "nvidia,tegra264-bpmp", .data = &tegra264_soc },
#endif
#if IS_ENABLED(CONFIG_ARCH_TEGRA_210_SOC)
--
2.43.0
next prev parent reply other threads:[~2026-11-02 12:16 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-02 12:11 [PATCH v3 0/4] Add Tegra238 BPMP support and fix stale EMC clock rate Johnny Liu
2026-11-02 12:11 ` [PATCH v3 1/4] dt-bindings: firmware: tegra186-bpmp: Add Tegra238 BPMP Johnny Liu
2026-11-02 13:12 ` Johnny Liu
2026-11-02 12:12 ` [PATCH v3 2/4] firmware: tegra: bpmp: Add per-SoC EMC clock ID Johnny Liu
2026-11-02 12:12 ` Johnny Liu [this message]
2026-11-02 12:12 ` [PATCH v3 4/4] clk: tegra: bpmp: Do not cache the EMC clock rate Johnny Liu
2026-11-12 11:59 ` Brian Masney
2026-11-03 6:25 ` [PATCH v3 0/4] Add Tegra238 BPMP support and fix stale " Mikko Perttunen
2026-11-12 1:20 ` Johnny Liu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261102121202.2431928-4-johnliu@nvidia.com \
--to=johnliu@nvidia.com \
--cc=anrao@nvidia.com \
--cc=bmasney+clk@redhat.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=jbrunet+clk@baylibre.com \
--cc=jonathanh@nvidia.com \
--cc=krzk+dt@kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=pgaikwad@nvidia.com \
--cc=robh@kernel.org \
--cc=sboyd@kernel.org \
--cc=thierry.reding@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.