[PATCH rtw-next 5/5] wifi: rtlwifi: rtl8192d: let the firmware use all rates

[Ho Jie Feng <hjf3108@gmail.com>]

The rate mask is chosen based on rssi_level, however rssi_level
is always 0, since:
- for rtl8192de, call to rtl92d_dm_refresh_rate_adaptive_mask is
  commented out and function is not implemented
- for rtl8192du, it is also not called.

This makes the branch always choose less than optimal allowed MCS rates.
Enable all the rates.

Test results (2.4 GHz):
   before after
TX 6.4    12.6
RX 32.0   39.1

Signed-off-by: Ho Jie Feng <hjf3108@gmail.com>
---
 .../wireless/realtek/rtlwifi/rtl8192d/hw_common.c    | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192d/hw_common.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192d/hw_common.c
index cfefbe86380fbc..0c921c049b5178 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192d/hw_common.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192d/hw_common.c
@@ -903,7 +903,7 @@ static void rtl92d_update_hal_rate_mask(struct ieee80211_hw *hw,
 		else if (rssi_level == 2)
 			ratr_bitmap &= 0x00000ff0;
 		else
-			ratr_bitmap &= 0x00000ff5;
+			ratr_bitmap &= 0x00000fff;
 		break;
 	case WIRELESS_MODE_A:
 		ratr_index = RATR_INX_WIRELESS_G;
@@ -922,7 +922,7 @@ static void rtl92d_update_hal_rate_mask(struct ieee80211_hw *hw,
 			else if (rssi_level == 2)
 				ratr_bitmap &= 0x0007f000;
 			else
-				ratr_bitmap &= 0x0007f005;
+				ratr_bitmap &= 0x000fffff;
 		} else {
 			if (rtlphy->rf_type == RF_1T2R ||
 			    rtlphy->rf_type == RF_1T1R) {
@@ -932,14 +932,14 @@ static void rtl92d_update_hal_rate_mask(struct ieee80211_hw *hw,
 					else if (rssi_level == 2)
 						ratr_bitmap &= 0x000ff000;
 					else
-						ratr_bitmap &= 0x000ff015;
+						ratr_bitmap &= 0x000fffff;
 				} else {
 					if (rssi_level == 1)
 						ratr_bitmap &= 0x000f0000;
 					else if (rssi_level == 2)
 						ratr_bitmap &= 0x000ff000;
 					else
-						ratr_bitmap &= 0x000ff005;
+						ratr_bitmap &= 0x000fffff;
 				}
 			} else {
 				if (curtxbw_40mhz) {
@@ -948,14 +948,14 @@ static void rtl92d_update_hal_rate_mask(struct ieee80211_hw *hw,
 					else if (rssi_level == 2)
 						ratr_bitmap &= 0x0f0ff000;
 					else
-						ratr_bitmap &= 0x0f0ff015;
+						ratr_bitmap &= 0x0fffffff;
 				} else {
 					if (rssi_level == 1)
 						ratr_bitmap &= 0x0f0f0000;
 					else if (rssi_level == 2)
 						ratr_bitmap &= 0x0f0ff000;
 					else
-						ratr_bitmap &= 0x0f0ff005;
+						ratr_bitmap &= 0x0fffffff;
 				}
 			}
 		}
-- 
2.53.0