[PATCH 07/10] pinctrl: realtek: Initialise omitted offset fields to NA in config macros

[Lee Jones <lee@kernel.org>]

The Realtek pinctrl driver uses NA (0xffffffff) as the sentinel for
unsupported pin configuration features.  However, RTK_PIN_CONFIG omits
input_volt_offset, slew_rate_offset, and hvil_offset, and
RTK_PIN_CONFIG_V2 omits slew_rate_offset and hvil_offset.  Because C99
designated initialisers zero-initialise omitted members, those fields
default to 0 instead of NA, causing rtd_pconf_parse_conf() to treat
unsupported features as valid at bit offset base_bit + 0 and corrupt
adjacent register bits.

Explicitly initialise the omitted offset fields to NA in RTK_PIN_CONFIG
and RTK_PIN_CONFIG_V2.

Fixes: dcc9334435b0 ("pinctrl: realtek: add support for slew rate, input voltage and high VIL")
Fixes: e309dbd523b8 ("pinctrl: realtek: add rtd1625 pinctrl driver")
Closes: https://sashiko.dev/#/bug/linux-fbd0bf54-6dba-4652-9418-270b11fb6d8b
Cc: stable@vger.kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
---
 drivers/pinctrl/realtek/pinctrl-rtd.h | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/pinctrl/realtek/pinctrl-rtd.h b/drivers/pinctrl/realtek/pinctrl-rtd.h
index 77c30ea76443..86db54ea3ce8 100644
--- a/drivers/pinctrl/realtek/pinctrl-rtd.h
+++ b/drivers/pinctrl/realtek/pinctrl-rtd.h
@@ -96,6 +96,9 @@ struct rtd_pin_reg_list {
 		.smt_offset = _smt_off, \
 		.power_offset = _pow_off, \
 		.curr_type = _curr_type, \
+		.input_volt_offset = NA, \
+		.slew_rate_offset = NA, \
+		.hvil_offset = NA, \
 	}
 
 #define RTK_PIN_CONFIG_V2(_name, _reg_off, _base_bit, _pud_en_off, \
@@ -112,6 +115,8 @@ struct rtd_pin_reg_list {
 		.power_offset = _pow_off, \
 		.input_volt_offset = _input_volt_off, \
 		.curr_type = _curr_type, \
+		.slew_rate_offset = NA, \
+		.hvil_offset = NA, \
 	}
 
 #define RTK_PIN_CONFIG_I2C(_name, _reg_off, _base_bit, _pud_en_off, \
-- 
2.56.0.385.gac671c819a-goog