From: Sasha Levin <sashal@kernel.org>
To: stable@vger.kernel.org
Cc: Lee Jones <lee@kernel.org>, Ping Cheng <ping.cheng@wacom.com>,
Jiri Kosina <jkosina@suse.com>, Sasha Levin <sashal@kernel.org>
Subject: [PATCH 5.15.y] HID: wacom: Advertise SW_MUTE_DEVICE capability prior to registration
Date: Wed, 4 Nov 2026 10:58:37 -0500 [thread overview]
Message-ID: <20261104155732.3922024-1-sashal@kernel.org> (raw)
In-Reply-To: <2026110416-undertone-chatter-7d31@gregkh>
From: Lee Jones <lee@kernel.org>
[ Upstream commit ba16e5ffbaa10fde960918d69af5e49f2b3fdd5e ]
Input subsystem guidelines require that device capabilities are advertised
before the input device is registered. The Wacom driver was violating
this by advertising the SW_MUTE_DEVICE capability post-registration in
wacom_set_shared_values() (and duplicating it in device-specific setup
cases).
Resolve this by moving the SW_MUTE_DEVICE capability setup to
wacom_setup_touch_input_capabilities() for all touch devices that support
it.
For generic touch devices whose capabilities depend on mute switch
usages parsed from a sibling Pen/Pad interface, defer registration
with -EPROBE_DEFER until the sibling has parsed its descriptors and
initialized shared capabilities.
Cc: stable@vger.kernel.org
Fixes: d2ec58aee8b1 ("HID: wacom: generic: support generic touch switch")
Signed-off-by: Lee Jones <lee@kernel.org>
Acked-by: Ping Cheng <ping.cheng@wacom.com>
Tested-by: Ping Cheng <ping.cheng@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
[ sashal: retained devm_add_action() with explicit failure cleanup instead of devm_add_action_or_reset() ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/hid/wacom_sys.c | 88 ++++++++++++++++++++++++++++++++++-------
drivers/hid/wacom_wac.c | 5 +++
2 files changed, 78 insertions(+), 15 deletions(-)
diff --git a/drivers/hid/wacom_sys.c b/drivers/hid/wacom_sys.c
index b5e6605a83753..4588bb153a93a 100644
--- a/drivers/hid/wacom_sys.c
+++ b/drivers/hid/wacom_sys.c
@@ -902,6 +902,9 @@ static int wacom_add_shared_data(struct hid_device *hdev)
wacom_wac->shared = &data->shared;
+ if (wacom_wac->has_mute_touch_switch)
+ WRITE_ONCE(wacom_wac->shared->has_mute_touch_switch, true);
+
retval = devm_add_action(&hdev->dev, wacom_remove_shared_data, wacom);
if (retval) {
mutex_unlock(&wacom_udev_list_lock);
@@ -909,11 +912,6 @@ static int wacom_add_shared_data(struct hid_device *hdev)
return retval;
}
- if (wacom_wac->features.device_type & WACOM_DEVICETYPE_TOUCH)
- wacom_wac->shared->touch = hdev;
- else if (wacom_wac->features.device_type & WACOM_DEVICETYPE_PEN)
- wacom_wac->shared->pen = hdev;
-
out:
mutex_unlock(&wacom_udev_list_lock);
return retval;
@@ -2314,13 +2312,12 @@ static void wacom_release_resources(struct wacom *wacom)
static void wacom_set_shared_values(struct wacom_wac *wacom_wac)
{
- if (wacom_wac->features.device_type & WACOM_DEVICETYPE_TOUCH) {
- wacom_wac->shared->type = wacom_wac->features.type;
- wacom_wac->shared->touch_input = wacom_wac->touch_input;
- }
+ struct wacom *wacom = container_of(wacom_wac, struct wacom, wacom_wac);
+
+ guard(mutex)(&wacom_udev_list_lock);
if (wacom_wac->has_mute_touch_switch) {
- wacom_wac->shared->has_mute_touch_switch = true;
+ WRITE_ONCE(wacom_wac->shared->has_mute_touch_switch, true);
/* Hardware touch switch may be off. Wait until
* we know the switch state to decide is_touch_on.
* Softkey state should be initialized to "on" to
@@ -2330,12 +2327,67 @@ static void wacom_set_shared_values(struct wacom_wac *wacom_wac)
WRITE_ONCE(wacom_wac->shared->is_touch_on, true);
}
- if (wacom_wac->shared->has_mute_touch_switch &&
- wacom_wac->shared->touch_input) {
- set_bit(EV_SW, wacom_wac->shared->touch_input->evbit);
- input_set_capability(wacom_wac->shared->touch_input, EV_SW,
- SW_MUTE_DEVICE);
+ if (wacom_wac->features.device_type & WACOM_DEVICETYPE_TOUCH) {
+ wacom_wac->shared->type = wacom_wac->features.type;
+ wacom_wac->shared->touch_input = wacom_wac->touch_input;
+ wacom_wac->shared->touch = wacom->hdev;
+ } else if (wacom_wac->features.device_type & WACOM_DEVICETYPE_PEN) {
+ /* Pairs with smp_load_acquire() in wacom_sibling_pending() */
+ smp_store_release(&wacom_wac->shared->pen, wacom->hdev);
+ }
+}
+
+static bool wacom_sibling_pending(struct wacom *wacom)
+{
+ const struct wacom_features *features = &wacom->wacom_wac.features;
+ struct hid_device *hdev = wacom->hdev;
+ struct usb_interface *sibling_intf;
+ int ifnum;
+
+ if (features->type != HID_GENERIC ||
+ !(features->device_type & WACOM_DEVICETYPE_TOUCH))
+ return false;
+
+ if (wacom->wacom_wac.shared) {
+ /* Pairs with smp_store_release() in wacom_set_shared_values() */
+ if (smp_load_acquire(&wacom->wacom_wac.shared->pen))
+ return false;
}
+
+ if (!hid_is_usb(hdev) || !wacom->usbdev || !wacom->intf ||
+ !wacom->intf->cur_altsetting)
+ return false;
+
+ ifnum = wacom->intf->cur_altsetting->desc.bInterfaceNumber;
+
+ /*
+ * On composite Wacom devices, the Pen interface is always interface 0.
+ * If the Touch interface is interface 0, there is no sibling Pen
+ * interface on this device (standalone touch device).
+ */
+ if (ifnum == 0)
+ return false;
+
+ /* Look for the sibling Pen interface at interface 0 */
+ sibling_intf = usb_ifnum_to_if(wacom->usbdev, 0);
+ if (!sibling_intf || !sibling_intf->cur_altsetting)
+ return false;
+
+ if (sibling_intf->cur_altsetting->desc.bInterfaceClass !=
+ USB_INTERFACE_CLASS_HID)
+ return false;
+
+ if (sibling_intf->cur_altsetting->desc.bInterfaceSubClass == 1 &&
+ (sibling_intf->cur_altsetting->desc.bInterfaceProtocol == 1 ||
+ sibling_intf->cur_altsetting->desc.bInterfaceProtocol == 2))
+ return false;
+
+ /*
+ * Interface 0 is a candidate HID interface on this composite device
+ * whose probe has not completed yet (shared->pen is NULL). Defer until
+ * interface 0 finishes probing and registers shared values.
+ */
+ return true;
}
static int wacom_parse_and_register(struct wacom *wacom, bool wireless)
@@ -2411,6 +2463,11 @@ static int wacom_parse_and_register(struct wacom *wacom, bool wireless)
if (error)
goto fail;
+ if (wacom_sibling_pending(wacom)) {
+ error = -EPROBE_DEFER;
+ goto fail;
+ }
+
if (!(features->device_type & WACOM_DEVICETYPE_WL_MONITOR) &&
(features->quirks & WACOM_QUIRK_BATTERY)) {
error = wacom_initialize_battery(wacom);
@@ -2475,6 +2532,7 @@ static int wacom_parse_and_register(struct wacom *wacom, bool wireless)
fail_hw_stop:
hid_hw_stop(hdev);
+ cancel_delayed_work_sync(&wacom->init_work);
fail:
wacom_release_resources(wacom);
return error;
diff --git a/drivers/hid/wacom_wac.c b/drivers/hid/wacom_wac.c
index 96164a97ff9cd..b1fd91aa5e370 100644
--- a/drivers/hid/wacom_wac.c
+++ b/drivers/hid/wacom_wac.c
@@ -3912,6 +3912,11 @@ int wacom_setup_touch_input_capabilities(struct input_dev *input_dev,
if (features->type == HID_GENERIC) {
hid_dbg(hdev, "generic touch setup\n");
+ if (wacom_wac->has_mute_touch_switch ||
+ (wacom_wac->shared && READ_ONCE(wacom_wac->shared->has_mute_touch_switch))) {
+ input_set_capability(input_dev, EV_SW, SW_MUTE_DEVICE);
+ wacom_wac->has_mute_touch_switch = true;
+ }
/* setup has already been done */
return 0;
}
--
2.53.0
prev parent reply other threads:[~2026-11-04 15:58 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-04 13:43 FAILED: patch "[PATCH] HID: wacom: Advertise SW_MUTE_DEVICE capability prior to" failed to apply to 5.15-stable tree gregkh
2026-11-04 15:58 ` Sasha Levin [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261104155732.3922024-1-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=jkosina@suse.com \
--cc=lee@kernel.org \
--cc=ping.cheng@wacom.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.