Re: [PATCH v4] leds: Add driver for MAX8907 LED cell

[Lee Jones <lee@kernel.org>]

On Wed, 04 Nov 2026, Svyatoslav Ryhel wrote:

> ср, 4 лист. 2026 р. о 17:16 Lee Jones <lee@kernel.org> пише:
> >
> > --- checkpatch.pl (1 issue) ---
> > Line 38: WARNING: please write a help paragraph that fully describes the config symbol with at least 4 lines
> > ----------------------------------
> >
> > On Tue, 27 Oct 2026, Svyatoslav Ryhel wrote:
> >
> > > Add a small driver to control the LED cell provided by the MAX8907 PMIC.
> > > The LED does not require any specific configuration and is folded into the
> > > PMIC's node.
> > >
> > > Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
> > > ---
> > > Changes in v2:
> > > - rebased so patch is now applicable to linux/next
> > >
> > > Changes in v3:
> > > - added check if led is off for get callback
> > > - added dedicated MAX8907_REG_WLED_MODE_ON mask
> > > - switched to devm_led_classdev_register_ext
> > >
> > > Changes in v4:
> > > - platform_set_drvdata dropped
> > > - init_data.devicename dropped
> > > - added MODULE_ALIAS
> > > ---
> > >  drivers/leds/Kconfig        |  7 +++
> > >  drivers/leds/Makefile       |  1 +
> > >  drivers/leds/leds-max8907.c | 90 +++++++++++++++++++++++++++++++++++++
> > >  drivers/mfd/max8907.c       |  1 +
> > >  include/linux/mfd/max8907.h |  2 +-
> > >  5 files changed, 100 insertions(+), 1 deletion(-)
> > >  create mode 100644 drivers/leds/leds-max8907.c
> > >
> > > diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
> > > index 788e689fe875c..3796c562919fe 100644
> > > --- a/drivers/leds/Kconfig
> > > +++ b/drivers/leds/Kconfig
> > > @@ -813,6 +813,13 @@ config LEDS_MAX77705
> > >       help
> > >         LED driver for MAX77705 PMIC from Maxim Integrated.
> > >
> > > +config LEDS_MAX8907
> > > +     tristate "LED support for MAX8907 PMIC"
> > > +     depends on LEDS_CLASS && MFD_MAX8907
> > > +     help
> > > +       This option enables support for on-chip LED drivers on
> > > +       MAXIM MAX8907 PMIC.
> >
> > As requested on v3, please expand this help text to at least 4 lines to satisfy
> > 'checkpatch.pl'.
> >
> > > +
> > >  config LEDS_MAX8997
> > >       tristate "LED support for MAX8997 PMIC"
> > >       depends on LEDS_CLASS && MFD_MAX8997
> > > diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
> > > index 3da746279bb81..24efda3fbaa44 100644
> > > --- a/drivers/leds/Makefile
> > > +++ b/drivers/leds/Makefile
> > > @@ -67,6 +67,7 @@ obj-$(CONFIG_LEDS_LTC3220)          += leds-ltc3220.o
> > >  obj-$(CONFIG_LEDS_MAX5970)           += leds-max5970.o
> > >  obj-$(CONFIG_LEDS_MAX77650)          += leds-max77650.o
> > >  obj-$(CONFIG_LEDS_MAX77705)          += leds-max77705.o
> > > +obj-$(CONFIG_LEDS_MAX8907)           += leds-max8907.o
> > >  obj-$(CONFIG_LEDS_MAX8997)           += leds-max8997.o
> > >  obj-$(CONFIG_LEDS_MC13783)           += leds-mc13783.o
> > >  obj-$(CONFIG_LEDS_MENF21BMC)         += leds-menf21bmc.o
> > > diff --git a/drivers/leds/leds-max8907.c b/drivers/leds/leds-max8907.c
> > > new file mode 100644
> > > index 0000000000000..a5c445f75d1b1
> > > --- /dev/null
> > > +++ b/drivers/leds/leds-max8907.c
> > > @@ -0,0 +1,90 @@
> > > +// SPDX-License-Identifier: GPL-2.0-only
> > > +
> > > +#include <linux/err.h>
> > > +#include <linux/leds.h>
> > > +#include <linux/mfd/max8907.h>
> > > +#include <linux/module.h>
> > > +#include <linux/platform_device.h>
> > > +#include <linux/property.h>
> > > +#include <linux/regmap.h>
> > > +
> > > +#define MAX8907_REG_WLED_MODE_ON     BIT(0)
> > > +
> > > +struct max8907_led_data {
> > > +     struct max8907 *max8907;
> >
> > As asked on v3, what is 'max8907' used for?
> >
> > > +     struct regmap *regmap;
> > > +     struct led_classdev cdev;
> > > +};
> > > +
> > > +static enum led_brightness max8907_led_get_brightness(struct led_classdev *cdev)
> > > +{
> > > +     struct max8907_led_data *ddata = container_of(cdev, struct max8907_led_data, cdev);
> > > +     unsigned int brightness_lvl;
> > > +     int ret;
> > > +
> > > +     ret = regmap_read(ddata->regmap, MAX8907_REG_WLED_MODE_CNTL, &brightness_lvl);
> > > +     if (ret || !(brightness_lvl & MAX8907_REG_WLED_MODE_ON))
> > > +             return LED_OFF;
> > > +
> > > +     ret = regmap_read(ddata->regmap, MAX8907_REG_WLED_CNTL, &brightness_lvl);
> > > +     if (ret)
> > > +             return LED_OFF;
> > > +
> > > +     return brightness_lvl;
> > > +}
> > > +
> > > +static int max8907_led_set_brightness(struct led_classdev *cdev,
> > > +                                   enum led_brightness brightness)
> > > +{
> > > +     struct max8907_led_data *ddata = container_of(cdev, struct max8907_led_data, cdev);
> > > +     int brightness_lvl, ret;
> > > +
> > > +     brightness_lvl = clamp(brightness, LED_OFF, LED_FULL);
> > > +
> > > +     if (brightness_lvl) {
> > > +             ret = regmap_write(ddata->regmap, MAX8907_REG_WLED_CNTL, brightness_lvl);
> > > +             if (ret)
> > > +                     return ret;
> > > +     }
> > > +
> > > +     return regmap_update_bits(ddata->regmap, MAX8907_REG_WLED_MODE_CNTL,
> > > +                               MAX8907_REG_WLED_MODE_ON,
> > > +                               brightness_lvl ? MAX8907_REG_WLED_MODE_ON : 0);
> > > +}
> > > +
> > > +static int max8907_led_probe(struct platform_device *pdev)
> > > +{
> > > +     struct device *dev = &pdev->dev;
> > > +     struct max8907 *max8907 = dev_get_drvdata(dev->parent);
> > > +     struct led_init_data init_data = { };
> > > +     struct max8907_led_data *ddata;
> > > +
> > > +     ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL);
> > > +     if (!ddata)
> > > +             return -ENOMEM;
> > > +
> > > +     ddata->max8907 = max8907;
> > > +     ddata->regmap = max8907->regmap_gen;
> > > +
> > > +     init_data.fwnode = dev_fwnode(dev->parent);
> >
> > This will evaluate to 'pmic'.  The sysfs attribute will be incorrect.
> >
> > Since there is no child node, why not set 'ddata->cdev.name' directly
> > and use 'devm_led_classdev_register()'?
> >
> > > +
> > > +     ddata->cdev.brightness = LED_OFF;
> > > +     ddata->cdev.flags = LED_CORE_SUSPENDRESUME;
> > > +     ddata->cdev.max_brightness = LED_FULL;
> > > +
> > > +     ddata->cdev.brightness_get = max8907_led_get_brightness;
> > > +     ddata->cdev.brightness_set_blocking = max8907_led_set_brightness;
> > > +
> > > +     return devm_led_classdev_register_ext(dev, &ddata->cdev, &init_data);
> > > +}
> > > +
> > > +static struct platform_driver max8907_led_driver = {
> > > +     .driver.name = "max8907-leds",
> >
> > Cute.  But please expand.
> >
> > > +     .probe = max8907_led_probe,
> > > +};
> > > +module_platform_driver(max8907_led_driver);
> > > +
> > > +MODULE_ALIAS("platform:max8907-leds");
> > > +MODULE_AUTHOR("Svyatolsav Ryhel <clamor95@gmail.com>");
> >
> > Your name is misspelt here.
> >
> > > +MODULE_DESCRIPTION("MAX8907 LED driver");
> > > +MODULE_LICENSE("GPL");
> > > diff --git a/drivers/mfd/max8907.c b/drivers/mfd/max8907.c
> > > index e282dd82ece69..826d7768fd8d0 100644
> > > --- a/drivers/mfd/max8907.c
> > > +++ b/drivers/mfd/max8907.c
> > > @@ -20,6 +20,7 @@
> > >  #include <linux/slab.h>
> > >
> > >  static const struct mfd_cell max8907_cells[] = {
> > > +     { .name = "max8907-leds", },
> >
> > Separate patch.
> >
> 
> All valid, but way adding led requires a separate patch? Just to know.

Build-deps only.

> The max8907.h change can be left with leds change? It changes reg name
> used by led cell.

Yes.  That's a build-dep.

> > >       { .name = "max8907-regulator", },
> > >       { .name = "max8907-rtc", },
> > >  };
> > > diff --git a/include/linux/mfd/max8907.h b/include/linux/mfd/max8907.h
> > > index e222250f0cc1e..35b2ede54f856 100644
> > > --- a/include/linux/mfd/max8907.h
> > > +++ b/include/linux/mfd/max8907.h
> > > @@ -112,7 +112,7 @@
> > >  #define MAX8907_REG_CHG_IRQ2_MASK    0x81
> > >  #define MAX8907_REG_CHG_STAT         0x82
> > >  #define MAX8907_REG_WLED_MODE_CNTL   0x84
> > > -#define MAX8907_REG_ILED_CNTL                0x84
> > > +#define MAX8907_REG_WLED_CNTL                0x85
> > >  #define MAX8907_REG_II1RR            0x8E
> > >  #define MAX8907_REG_II2RR            0x8F
> > >  #define MAX8907_REG_LDOCTL20         0x9C
> > > --
> > > 2.53.0
> > >
> > >
> >
> > --
> > Lee Jones

-- 
Lee Jones