All of lore.kernel.org
 help / color / mirror / Atom feed
From: Lee Jones <lee@kernel.org>
To: lee@kernel.org, Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>,
	Linus Walleij <linusw@kernel.org>,
	Bartosz Golaszewski <brgl@kernel.org>,
	Charles Keepax <ckeepax@opensource.cirrus.com>,
	patches@opensource.cirrus.com, linux-kernel@vger.kernel.org,
	linux-gpio@vger.kernel.org
Cc: stable@vger.kernel.org
Subject: [PATCH 02/10] regulator: arizona-ldo1: Avoid double gpiod_put() on enable GPIO
Date: Wed,  4 Nov 2026 18:20:52 +0000	[thread overview]
Message-ID: <20261104182148.1176116-3-lee@kernel.org> (raw)
In-Reply-To: <20261104182148.1176116-1-lee@kernel.org>

Passing config.ena_gpiod to devm_regulator_register() transfers ownership
of the GPIO descriptor to the regulator core, which releases it via
gpiod_put() in regulator_ena_gpio_free() upon registration failure or
when devres unregisters the regulator.

Calling gpiod_put(ldo1->ena_gpiod) in arizona_ldo1_remove() prematurely
frees the enable GPIO while the regulator is still registered and causes
a second gpiod_put() when devm_rdev_release() runs.  Drop the redundant
remove callback and ena_gpiod field so the regulator core manages the
descriptor lifetime exclusively.

Fixes: a9191579ba10 ("regulator: arizona-ldo1: Use correct device to get enable GPIO")
Closes: https://sashiko.dev/#/bug/linux-7988402e-ca08-4bd3-9488-5779d6da0450
Cc: stable@vger.kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
---
 drivers/regulator/arizona-ldo1.c | 16 ----------------
 1 file changed, 16 deletions(-)

diff --git a/drivers/regulator/arizona-ldo1.c b/drivers/regulator/arizona-ldo1.c
index 501843996faa..981e047167ea 100644
--- a/drivers/regulator/arizona-ldo1.c
+++ b/drivers/regulator/arizona-ldo1.c
@@ -35,8 +35,6 @@ struct arizona_ldo1 {
 
 	struct regulator_consumer_supply supply;
 	struct regulator_init_data init_data;
-
-	struct gpio_desc *ena_gpiod;
 };
 
 static int arizona_ldo1_hc_set_voltage_sel(struct regulator_dev *rdev,
@@ -262,8 +260,6 @@ static int arizona_ldo1_common_init(struct platform_device *pdev,
 	if (IS_ERR(config.ena_gpiod))
 		return PTR_ERR(config.ena_gpiod);
 
-	ldo1->ena_gpiod = config.ena_gpiod;
-
 	if (pdata->init_data)
 		config.init_data = pdata->init_data;
 	else
@@ -287,8 +283,6 @@ static int arizona_ldo1_common_init(struct platform_device *pdev,
 		return ret;
 	}
 
-	platform_set_drvdata(pdev, ldo1);
-
 	return 0;
 }
 
@@ -339,14 +333,6 @@ static int arizona_ldo1_probe(struct platform_device *pdev)
 	return ret;
 }
 
-static void arizona_ldo1_remove(struct platform_device *pdev)
-{
-	struct arizona_ldo1 *ldo1 = platform_get_drvdata(pdev);
-
-	if (ldo1->ena_gpiod)
-		gpiod_put(ldo1->ena_gpiod);
-}
-
 static int madera_ldo1_probe(struct platform_device *pdev)
 {
 	struct madera *madera = dev_get_drvdata(pdev->dev.parent);
@@ -375,7 +361,6 @@ static int madera_ldo1_probe(struct platform_device *pdev)
 
 static struct platform_driver arizona_ldo1_driver = {
 	.probe = arizona_ldo1_probe,
-	.remove = arizona_ldo1_remove,
 	.driver = {
 		.name = "arizona-ldo1",
 		.probe_type = PROBE_FORCE_SYNCHRONOUS,
@@ -384,7 +369,6 @@ static struct platform_driver arizona_ldo1_driver = {
 
 static struct platform_driver madera_ldo1_driver = {
 	.probe = madera_ldo1_probe,
-	.remove = arizona_ldo1_remove,
 	.driver = {
 		.name = "madera-ldo1",
 		.probe_type = PROBE_FORCE_SYNCHRONOUS,
-- 
2.56.0.385.gac671c819a-goog


  parent reply	other threads:[~2026-11-04 18:22 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-04 18:20 [PATCH 00/10] regulator: Fix teardown races, reference counting, and error handling Lee Jones
2026-11-04 18:20 ` [PATCH 01/10] regulator: irq_helpers: Clear caller handle in regulator_irq_helper_cancel() Lee Jones
2026-11-05  7:58   ` Matti Vaittinen
2026-11-04 18:20 ` Lee Jones [this message]
2026-11-05 10:08   ` [PATCH 02/10] regulator: arizona-ldo1: Avoid double gpiod_put() on enable GPIO Charles Keepax
2026-11-04 18:20 ` [PATCH 03/10] regulator: core: Flush delayed disable_work before releasing supply in regulator_unregister() Lee Jones
2026-11-04 18:20 ` [PATCH 04/10] regulator: arizona-micsupp: Cancel check_cp_work on device teardown Lee Jones
2026-11-05 10:15   ` Charles Keepax
2026-11-04 18:20 ` [PATCH 05/10] regulator: core: Hold supply device reference until constraints are resolved in regulator_resolve_supply() Lee Jones
2026-11-05 17:28   ` André Draszik
2026-11-04 18:20 ` [PATCH 06/10] regulator: core: Use ktime_get_boottime() in set_machine_constraints() Lee Jones
2026-11-04 18:20 ` [PATCH 07/10] regulator: bq257xx: Propagate GPIO error in bq257xx_reg_dt_parse_gpio() Lee Jones
2026-11-04 18:20 ` [PATCH 08/10] regulator: tps6594-regulator: Fix LDO4 n_voltages in tps6594_ldo_regs Lee Jones
2026-11-04 18:20 ` [PATCH 09/10] regulator: max8907: Avoid NULL idata dereference in max8907_regulator_probe() Lee Jones
2026-11-04 18:21 ` [PATCH 10/10] regulator: rt6190: Check pm_runtime_resume_and_get() return value in rt6190_out_enable() Lee Jones
2026-11-05 13:53 ` [PATCH 00/10] regulator: Fix teardown races, reference counting, and error handling Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261104182148.1176116-3-lee@kernel.org \
    --to=lee@kernel.org \
    --cc=brgl@kernel.org \
    --cc=broonie@kernel.org \
    --cc=ckeepax@opensource.cirrus.com \
    --cc=lgirdwood@gmail.com \
    --cc=linusw@kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=patches@opensource.cirrus.com \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.