From: Sasha Levin <sashal@kernel.org>
To: stable@vger.kernel.org
Cc: Balakrishnan Sambath <balakrishnan.s@microchip.com>,
Eugen Hristev <ehristev@kernel.org>,
Hans Verkuil <hverkuil+cisco@kernel.org>,
Sasha Levin <sashal@kernel.org>
Subject: [PATCH 6.6.y 2/2] media: microchip-isc: take a reference on the parsed endpoints
Date: Wed, 4 Nov 2026 17:54:06 -0500 [thread overview]
Message-ID: <20261104225337.851869-2-sashal@kernel.org> (raw)
In-Reply-To: <20261104225337.851869-1-sashal@kernel.org>
From: Balakrishnan Sambath <balakrishnan.s@microchip.com>
[ Upstream commit f2eb2fd388bf3f1959556a326e797cacca341c86 ]
for_each_endpoint_of_node() drops the reference on the current node as
it advances. xisc_parse_dt() and isc_parse_dt() store the node in
subdev_entity->epn and release it later with of_node_put(), but never
took their own reference, so the stored pointer refers to an
already-released node. This underflows the refcount and can
use-after-free, reachable through the camera device tree overlay.
Take a reference with of_node_get() when storing the node, and drop it
in microchip_isc_subdev_cleanup() so the entities the bind loop never
reaches on an early exit do not leak it.
Fixes: c9aa973884a1 ("media: atmel: atmel-isc: add microchip-xisc driver")
Fixes: d6701f13bd07 ("media: atmel: Use v4l2_async_notifier_add_fwnode_remote_subdev")
Cc: stable@vger.kernel.org
Signed-off-by: Balakrishnan Sambath <balakrishnan.s@microchip.com>
Reviewed-by: Eugen Hristev <ehristev@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../platform/microchip/microchip-isc-base.c | 6 ++++++
.../platform/microchip/microchip-sama5d2-isc.c | 17 ++++++++++++-----
.../platform/microchip/microchip-sama7g5-isc.c | 17 ++++++++++++-----
3 files changed, 30 insertions(+), 10 deletions(-)
diff --git a/drivers/media/platform/microchip/microchip-isc-base.c b/drivers/media/platform/microchip/microchip-isc-base.c
index 8dbf7bc1e863b..78a26babf3894 100644
--- a/drivers/media/platform/microchip/microchip-isc-base.c
+++ b/drivers/media/platform/microchip/microchip-isc-base.c
@@ -1902,6 +1902,12 @@ void microchip_isc_subdev_cleanup(struct isc_device *isc)
list_for_each_entry(subdev_entity, &isc->subdev_entities, list) {
v4l2_async_nf_unregister(&subdev_entity->notifier);
v4l2_async_nf_cleanup(&subdev_entity->notifier);
+ /*
+ * Release the endpoint reference taken while parsing. It is
+ * NULL for entities the bind loop already consumed, so this
+ * only drops the ones left over on an early exit.
+ */
+ of_node_put(subdev_entity->epn);
}
INIT_LIST_HEAD(&isc->subdev_entities);
diff --git a/drivers/media/platform/microchip/microchip-sama5d2-isc.c b/drivers/media/platform/microchip/microchip-sama5d2-isc.c
index 60b6d922d764e..4033bfc96bb77 100644
--- a/drivers/media/platform/microchip/microchip-sama5d2-isc.c
+++ b/drivers/media/platform/microchip/microchip-sama5d2-isc.c
@@ -356,28 +356,30 @@ static int isc_parse_dt(struct device *dev, struct isc_device *isc)
struct device_node *epn;
struct isc_subdev_entity *subdev_entity;
unsigned int flags;
+ int ret;
INIT_LIST_HEAD(&isc->subdev_entities);
for_each_endpoint_of_node(np, epn) {
struct v4l2_fwnode_endpoint v4l2_epn = { .bus_type = 0 };
- int ret;
ret = v4l2_fwnode_endpoint_parse(of_fwnode_handle(epn),
&v4l2_epn);
if (ret) {
- of_node_put(epn);
dev_err(dev, "Could not parse the endpoint\n");
- return -EINVAL;
+ of_node_put(epn);
+ ret = -EINVAL;
+ goto err_cleanup;
}
subdev_entity = devm_kzalloc(dev, sizeof(*subdev_entity),
GFP_KERNEL);
if (!subdev_entity) {
of_node_put(epn);
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto err_cleanup;
}
- subdev_entity->epn = epn;
+ subdev_entity->epn = of_node_get(epn);
flags = v4l2_epn.bus.parallel.flags;
@@ -398,6 +400,11 @@ static int isc_parse_dt(struct device *dev, struct isc_device *isc)
}
return 0;
+
+err_cleanup:
+ list_for_each_entry(subdev_entity, &isc->subdev_entities, list)
+ of_node_put(subdev_entity->epn);
+ return ret;
}
static int microchip_isc_probe(struct platform_device *pdev)
diff --git a/drivers/media/platform/microchip/microchip-sama7g5-isc.c b/drivers/media/platform/microchip/microchip-sama7g5-isc.c
index e97abe3e35af0..58cfbf6fcd668 100644
--- a/drivers/media/platform/microchip/microchip-sama7g5-isc.c
+++ b/drivers/media/platform/microchip/microchip-sama7g5-isc.c
@@ -340,6 +340,7 @@ static int xisc_parse_dt(struct device *dev, struct isc_device *isc)
struct isc_subdev_entity *subdev_entity;
unsigned int flags;
bool mipi_mode;
+ int ret;
INIT_LIST_HEAD(&isc->subdev_entities);
@@ -347,23 +348,24 @@ static int xisc_parse_dt(struct device *dev, struct isc_device *isc)
for_each_endpoint_of_node(np, epn) {
struct v4l2_fwnode_endpoint v4l2_epn = { .bus_type = 0 };
- int ret;
ret = v4l2_fwnode_endpoint_parse(of_fwnode_handle(epn),
&v4l2_epn);
if (ret) {
- of_node_put(epn);
dev_err(dev, "Could not parse the endpoint\n");
- return -EINVAL;
+ of_node_put(epn);
+ ret = -EINVAL;
+ goto err_cleanup;
}
subdev_entity = devm_kzalloc(dev, sizeof(*subdev_entity),
GFP_KERNEL);
if (!subdev_entity) {
of_node_put(epn);
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto err_cleanup;
}
- subdev_entity->epn = epn;
+ subdev_entity->epn = of_node_get(epn);
flags = v4l2_epn.bus.parallel.flags;
@@ -387,6 +389,11 @@ static int xisc_parse_dt(struct device *dev, struct isc_device *isc)
}
return 0;
+
+err_cleanup:
+ list_for_each_entry(subdev_entity, &isc->subdev_entities, list)
+ of_node_put(subdev_entity->epn);
+ return ret;
}
static int microchip_xisc_probe(struct platform_device *pdev)
--
2.53.0
prev parent reply other threads:[~2026-11-04 22:54 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-04 14:17 FAILED: patch "[PATCH] media: microchip-isc: take a reference on the parsed" failed to apply to 6.6-stable tree gregkh
2026-11-04 22:54 ` [PATCH 6.6.y 1/2] media: platform: microchip: use for_each_endpoint_of_node() Sasha Levin
2026-11-04 22:54 ` Sasha Levin [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261104225337.851869-2-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=balakrishnan.s@microchip.com \
--cc=ehristev@kernel.org \
--cc=hverkuil+cisco@kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.