From: Vladimir Zapolskiy <vz@kernel.org>
To: Loic Poulain <loic.poulain@oss.qualcomm.com>,
Robert Foss <rfoss@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>,
Abel Vesa <abelvesa@kernel.org>
Cc: Andi Shyti <andi.shyti@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
linux-i2c@vger.kernel.org, linux-arm-msm@vger.kernel.org,
devicetree@vger.kernel.org
Subject: [PATCH 3/3] arm64: dts: qcom: sm8350: Add camera MCLK pinctrl states
Date: Thu, 5 Nov 2026 01:05:29 +0200 [thread overview]
Message-ID: <20261104230529.3040285-4-vz@kernel.org> (raw)
In-Reply-To: <20261104230529.3040285-1-vz@kernel.org>
Add pinctrl states of six camera sensor MCLK output pins found on
Qualcomm SM8350 SoC.
Signed-off-by: Vladimir Zapolskiy <vz@kernel.org>
---
arch/arm64/boot/dts/qcom/sm8350.dtsi | 84 ++++++++++++++++++++++++++++
1 file changed, 84 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index 41dff3736061..437ceaa28fbd 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -3431,6 +3431,90 @@ tlmm: pinctrl@f100000 {
gpio-ranges = <&tlmm 0 0 204>;
wakeup-parent = <&pdc>;
+ cam_mclk0_default: cam-mclk0-default-state {
+ pins = "gpio100";
+ function = "cam_mclk";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ cam_mclk0_sleep: cam-mclk0-sleep-state {
+ pins = "gpio100";
+ function = "cam_mclk";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ cam_mclk1_default: cam-mclk1-default-state {
+ pins = "gpio101";
+ function = "cam_mclk";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ cam_mclk1_sleep: cam-mclk1-sleep-state {
+ pins = "gpio101";
+ function = "cam_mclk";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ cam_mclk2_default: cam-mclk2-default-state {
+ pins = "gpio102";
+ function = "cam_mclk";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ cam_mclk2_sleep: cam-mclk2-sleep-state {
+ pins = "gpio102";
+ function = "cam_mclk";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ cam_mclk3_default: cam-mclk3-default-state {
+ pins = "gpio103";
+ function = "cam_mclk";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ cam_mclk3_sleep: cam-mclk3-sleep-state {
+ pins = "gpio103";
+ function = "cam_mclk";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ cam_mclk4_default: cam-mclk4-default-state {
+ pins = "gpio104";
+ function = "cam_mclk";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ cam_mclk4_sleep: cam-mclk4-sleep-state {
+ pins = "gpio104";
+ function = "cam_mclk";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ cam_mclk5_default: cam-mclk5-default-state {
+ pins = "gpio105";
+ function = "cam_mclk";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ cam_mclk5_sleep: cam-mclk5-sleep-state {
+ pins = "gpio105";
+ function = "cam_mclk";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
cci0_0_default: cci0-0-default-state {
/* SDA, SCL */
pins = "gpio107", "gpio108";
--
2.51.0
next prev parent reply other threads:[~2026-11-04 23:05 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-04 23:05 [PATCH 0/3] arm64: dts: qcom: sm8350: Add CCI and camera MCLK pins Vladimir Zapolskiy
2026-11-04 23:05 ` [PATCH 1/3] dt-bindings: i2c: qcom-cci: Document SM8350 compatible Vladimir Zapolskiy
2026-11-05 8:38 ` Loic Poulain
2026-11-07 14:27 ` Wolfram Sang
2026-11-04 23:05 ` [PATCH 2/3] arm64: dts: qcom: sm8350: Add CCI device tree nodes Vladimir Zapolskiy
2026-11-05 8:37 ` Loic Poulain
2026-11-07 18:12 ` Vladimir Zapolskiy
2026-11-09 8:46 ` Loic Poulain
2026-11-04 23:05 ` Vladimir Zapolskiy [this message]
2026-11-05 8:56 ` [PATCH 3/3] arm64: dts: qcom: sm8350: Add camera MCLK pinctrl states Konrad Dybcio
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261104230529.3040285-4-vz@kernel.org \
--to=vz@kernel.org \
--cc=abelvesa@kernel.org \
--cc=andersson@kernel.org \
--cc=andi.shyti@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-i2c@vger.kernel.org \
--cc=loic.poulain@oss.qualcomm.com \
--cc=rfoss@kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.