[PATCH 2/8] pwm: mxs: Return early when disabling and fix error-path clock leak

[Lee Jones <lee@kernel.org>]

When disabling a PWM channel (!state->enabled), the PWM core permits
state->period to be zero.  mxs_pwm_apply() currently falls through into
the period and duty-cycle calculations even when !state->enabled,
causing do_div(c, state->period) to divide by zero when state->period is
zero.  In addition, if the requested period exceeds the maximum divider
(div >= PERIOD_CDIV_MAX) while the PWM channel is currently disabled,
mxs_pwm_apply() returns -EINVAL without disabling and unpreparing
mxs->clk.

Handle the !state->enabled path upfront and return early, and balance
clk_prepare_enable() on the -EINVAL error path.

Fixes: bf29c2ff82fd ("pwm: mxs: Implement ->apply()")
Closes: https://sashiko.dev/#/bug/linux-710f863f-6964-4e4f-990a-e5043dbc1a87
Cc: stable@vger.kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
---
 drivers/pwm/pwm-mxs.c | 32 ++++++++++++++++++--------------
 1 file changed, 18 insertions(+), 14 deletions(-)

diff --git a/drivers/pwm/pwm-mxs.c b/drivers/pwm/pwm-mxs.c
index e1a3df6549fc..16233764fd3c 100644
--- a/drivers/pwm/pwm-mxs.c
+++ b/drivers/pwm/pwm-mxs.c
@@ -56,6 +56,14 @@ static int mxs_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 	unsigned long long c;
 	unsigned int pol_bits;
 
+	if (!state->enabled) {
+		if (pwm_is_enabled(pwm)) {
+			writel(1 << pwm->hwpwm, mxs->base + PWM_CTRL + CLR);
+			clk_disable_unprepare(mxs->clk);
+		}
+		return 0;
+	}
+
 	/*
 	 * If the PWM channel is disabled, make sure to turn on the
 	 * clock before calling clk_get_rate() and writing to the
@@ -67,9 +75,6 @@ static int mxs_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 			return ret;
 	}
 
-	if (!state->enabled && pwm_is_enabled(pwm))
-		writel(1 << pwm->hwpwm, mxs->base + PWM_CTRL + CLR);
-
 	rate = clk_get_rate(mxs->clk);
 	while (1) {
 		c = rate >> cdiv_shift[div];
@@ -78,8 +83,11 @@ static int mxs_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 		if (c < PERIOD_PERIOD_MAX)
 			break;
 		div++;
-		if (div >= PERIOD_CDIV_MAX)
+		if (div >= PERIOD_CDIV_MAX) {
+			if (!pwm_is_enabled(pwm))
+				clk_disable_unprepare(mxs->clk);
 			return -EINVAL;
+		}
 	}
 
 	period_cycles = c;
@@ -101,16 +109,12 @@ static int mxs_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 	writel(PERIOD_PERIOD(period_cycles) | pol_bits | PERIOD_CDIV(div),
 	       mxs->base + PWM_PERIOD0 + pwm->hwpwm * 0x20);
 
-	if (state->enabled) {
-		if (!pwm_is_enabled(pwm)) {
-			/*
-			 * The clock was enabled above. Just enable
-			 * the channel in the control register.
-			 */
-			writel(1 << pwm->hwpwm, mxs->base + PWM_CTRL + SET);
-		}
-	} else {
-		clk_disable_unprepare(mxs->clk);
+	if (!pwm_is_enabled(pwm)) {
+		/*
+		 * The clock was enabled above. Just enable
+		 * the channel in the control register.
+		 */
+		writel(1 << pwm->hwpwm, mxs->base + PWM_CTRL + SET);
 	}
 	return 0;
 }
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
-- 
2.56.0.398.g882cbad275-goog