FAILED: patch "[PATCH] media: imx219: Account for rate_factor in control steps" failed to apply to 6.18-stable tree

[Sasha Levin <sashal@kernel.org>]

The patch below does not apply to the 6.18-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.18.y
git checkout FETCH_HEAD
git cherry-pick -x 57043aef0a04bd96d97881422590e71c1e4c45b1
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '20261107050653-failed-6.18-57043aef0a04@kernel.org' --subject-prefix 'PATCH 6.18.y' 'HEAD^..'

Thanks,
Sasha

------------------ original commit in Linus's tree ------------------

From 57043aef0a04bd96d97881422590e71c1e4c45b1 Mon Sep 17 00:00:00 2001
From: Sakari Ailus <sakari.ailus@linux.intel.com>
Date: Mon, 22 Jun 2026 14:16:45 +0300
Subject: [PATCH] media: imx219: Account for rate_factor in control steps

The controls that are divided by the rate_factor before writing them to
the registers have the step of the value of the rate_factor. Take this
into account when the control's range is modified. The controls are
created in a configuration where rate_factor is always 1, hence there's no
need to change the code adding new controls.

Fixes: f513997119f4 ("media: i2c: imx219: Scale the pixel rate for analog binning")
Cc: stable@vger.kernel.org
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 drivers/media/i2c/imx219.c | 16 +++++++---------
 1 file changed, 7 insertions(+), 9 deletions(-)

diff --git a/drivers/media/i2c/imx219.c b/drivers/media/i2c/imx219.c
index 5184523de8bed..b1f29037af742 100644
--- a/drivers/media/i2c/imx219.c
+++ b/drivers/media/i2c/imx219.c
@@ -340,13 +340,13 @@ static const struct imx219_mode supported_modes[] = {
 		/* 2x2 binned 60fps mode */
 		.width = 1640,
 		.height = 1232,
-		.fll_def = 1707,
+		.fll_def = 1706,
 	},
 	{
 		/* 640x480 60fps mode */
 		.width = 640,
 		.height = 480,
-		.fll_def = 1707,
+		.fll_def = 1706,
 	},
 };
 
@@ -473,8 +473,7 @@ static int imx219_set_ctrl(struct v4l2_ctrl *ctrl)
 		ret = __v4l2_ctrl_modify_range(imx219->exposure,
 					       imx219->exposure->minimum,
 					       exposure_max,
-					       imx219->exposure->step,
-					       exposure_def);
+					       rate_factor, exposure_def);
 		if (ret)
 			return ret;
 
@@ -902,7 +901,8 @@ static int imx219_set_pad_format(struct v4l2_subdev *sd,
 
 		/* Update limits and set FPS to default */
 		ret = __v4l2_ctrl_modify_range(imx219->vblank, IMX219_VBLANK_MIN,
-					       IMX219_FLL_MAX - mode->height, 1,
+					       IMX219_FLL_MAX - mode->height,
+					       rate_factor,
 					       mode->fll_def - mode->height);
 		if (ret)
 			return ret;
@@ -920,8 +920,7 @@ static int imx219_set_pad_format(struct v4l2_subdev *sd,
 		ret = __v4l2_ctrl_modify_range(imx219->exposure,
 					       imx219->exposure->minimum,
 					       exposure_max,
-					       imx219->exposure->step,
-					       exposure_def);
+					       rate_factor, exposure_def);
 		if (ret)
 			return ret;
 
@@ -946,8 +945,7 @@ static int imx219_set_pad_format(struct v4l2_subdev *sd,
 			return ret;
 
 		/* Scale the pixel rate based on the mode specific factor */
-		pixel_rate = imx219_get_pixel_rate(imx219) *
-			     imx219_get_rate_factor(state);
+		pixel_rate = imx219_get_pixel_rate(imx219) * rate_factor;
 		ret = __v4l2_ctrl_modify_range(imx219->pixel_rate, pixel_rate,
 					       pixel_rate, 1, pixel_rate);
 		if (ret)
-- 
2.53.0