FAILED: patch "[PATCH] arm64: dts: ti: k3-am625-sk-common: Set eMMC clock pin as OUTPUT" failed to apply to 6.6-stable tree

[Sasha Levin <sashal@kernel.org>]

The patch below does not apply to the 6.6-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y
git checkout FETCH_HEAD
git cherry-pick -x 8ef8a0e38d1377c6d51c06f95c64d87641b2c717
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<stable@vger.kernel.org>' --in-reply-to '20261107053000-failed-6.6-8ef8a0e38d13@kernel.org' --subject-prefix 'PATCH 6.6.y' 'HEAD^..'

Thanks,
Sasha

------------------ original commit in Linus's tree ------------------

From 8ef8a0e38d1377c6d51c06f95c64d87641b2c717 Mon Sep 17 00:00:00 2001
From: Judith Mendez <jm@ti.com>
Date: Wed, 9 Sep 2026 16:47:38 -0500
Subject: [PATCH] arm64: dts: ti: k3-am625-sk-common: Set eMMC clock pin as
 OUTPUT

MMC clock pins must be configured as OUTPUT-only per TRM [0] with
receiver disabled (RXACTIVE bit = 0). Change MMC CLK pins from
PIN_INPUT to PIN_OUTPUT to match documentation.

[0] https://www.ti.com/lit/pdf/spruiv7 Rev. C: Table 12-246. MMCSDi I/O Signals

Fixes: d19a66ae488a ("arm64: dts: ti: k3-am625-sk: Enable on board peripherals")
Cc: stable@vger.kernel.org
Signed-off-by: Judith Mendez <jm@ti.com>
Reviewed-by: Moteen Shah <m-shah@ti.com>
Link: https://patch.msgid.link/20260909214743.899477-11-jm@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am625-sk-common.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am625-sk-common.dtsi b/arch/arm64/boot/dts/ti/k3-am625-sk-common.dtsi
index a5922bd746d86..8e07d2c2e62fd 100644
--- a/arch/arm64/boot/dts/ti/k3-am625-sk-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am625-sk-common.dtsi
@@ -98,7 +98,7 @@ main_mmc0_pins_default: main-mmc0-default-pins {
 		bootph-all;
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x220, PIN_INPUT, 0) /* (Y3) MMC0_CMD */
-			AM62X_IOPAD(0x218, PIN_INPUT, 0) /* (AB1) MMC0_CLK */
+			AM62X_IOPAD(0x218, PIN_OUTPUT, 0) /* (AB1) MMC0_CLK */
 			AM62X_IOPAD(0x214, PIN_INPUT, 0) /* (AA2) MMC0_DAT0 */
 			AM62X_IOPAD(0x210, PIN_INPUT_PULLUP, 0) /* (AA1) MMC0_DAT1 */
 			AM62X_IOPAD(0x20c, PIN_INPUT_PULLUP, 0) /* (AA3) MMC0_DAT2 */
-- 
2.53.0