[PATCH v8 09/12] scsi: scsi_proto: refine the definition of storage element health

[Damien Le Moal <dlemoal@kernel.org>]

A disk may report the health of a storage element as being within or
outside of the manufacturer's specification limits using a range of values
for the health field. However, in scsi_proto.h, we only define the
start of each range using the SCSI_PHYS_ELEM_HEALTH_WITHIN_SPEC_LIMITS and
SCSI_PHYS_ELEM_HEALTH_OUTSIDE_SPEC_LIMITS enum value.

Define the full range by renaming SCSI_PHYS_ELEM_HEALTH_WITHIN_SPEC_LIMITS
to SCSI_PHYS_ELEM_HEALTH_WITHIN_SPEC_LIMITS_MIN and by defining the
healthy range end with SCSI_PHYS_ELEM_HEALTH_WITHIN_SPEC_LIMITS_MAX. The
same treatment is done for the outside range with the renaming of
SCSI_PHYS_ELEM_HEALTH_OUTSIDE_SPEC_LIMITS to
SCSI_PHYS_ELEM_HEALTH_OUTSIDE_SPEC_LIMITS_MIN, and the definition of the
range upper value with SCSI_PHYS_ELEM_HEALTH_OUTSIDE_SPEC_LIMITS_MAX.

Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
---
 include/scsi/scsi_proto.h | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/include/scsi/scsi_proto.h b/include/scsi/scsi_proto.h
index 9c7d31aa6bae..f290a214e3e0 100644
--- a/include/scsi/scsi_proto.h
+++ b/include/scsi/scsi_proto.h
@@ -408,9 +408,11 @@ enum scsi_phys_element_type {
 /* SCSI physical element health. */
 enum scsi_phys_element_health {
 	SCSI_PHYS_ELEM_HEALTH_NOT_REPORTED		= 0x00,
-	SCSI_PHYS_ELEM_HEALTH_WITHIN_SPEC_LIMITS	= 0x01,
+	SCSI_PHYS_ELEM_HEALTH_WITHIN_SPEC_LIMITS_MIN	= 0x01,
+	SCSI_PHYS_ELEM_HEALTH_WITHIN_SPEC_LIMITS_MAX	= 0x63,
 	SCSI_PHYS_ELEM_HEALTH_AT_SPEC_LIMITS		= 0x64,
-	SCSI_PHYS_ELEM_HEALTH_OUTSIDE_SPEC_LIMITS	= 0x65,
+	SCSI_PHYS_ELEM_HEALTH_OUTSIDE_SPEC_LIMITS_MIN	= 0x65,
+	SCSI_PHYS_ELEM_HEALTH_OUTSIDE_SPEC_LIMITS_MAX	= 0xCF,
 	SCSI_PHYS_ELEM_HEALTH_DEPOP_REVOKE_ERR		= 0xFB,
 	SCSI_PHYS_ELEM_HEALTH_DEPOP_REVOKE_IN_PROGRESS	= 0xFC,
 	SCSI_PHYS_ELEM_HEALTH_DEPOP_ERR			= 0xFD,
-- 
2.56.0