From: Andrew Morton <akpm@linux-foundation.org>
To: mm-commits@vger.kernel.org,joseph.qi@linux.alibaba.com,
akpm@linux-foundation.org
Subject: + ocfs2-check-inline-data-dinodes-in-online-filecheck.patch added to mm-nonmm-unstable branch
Date: Mon, 09 Nov 2026 12:53:34 -0800 [thread overview]
Message-ID: <20261109205334.9FD1F1F0089F@smtp.kernel.org> (raw)
The patch titled
Subject: ocfs2: check inline data dinodes in online filecheck
has been added to the -mm mm-nonmm-unstable branch. Its filename is
ocfs2-check-inline-data-dinodes-in-online-filecheck.patch
This patch will shortly appear at
https://git.kernel.org/pub/scm/linux/kernel/git/akpm/25-new.git/tree/patches/ocfs2-check-inline-data-dinodes-in-online-filecheck.patch
This patch will later appear in the mm-nonmm-unstable branch at
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Before you just go and hit "reply", please:
a) Consider who else should be cc'ed
b) Prefer to cc a suitable mailing list as well
c) Ideally: find the original patch on the mailing list and do a
reply-to-all to that, adding suitable additional cc's
*** Remember to use Documentation/process/submit-checklist.rst when testing your code ***
The -mm tree is included into linux-next via various
branches at git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
and is updated there most days
------------------------------------------------------
From: Joseph Qi <joseph.qi@linux.alibaba.com>
Subject: ocfs2: check inline data dinodes in online filecheck
Date: Mon, 09 Nov 2026 20:21:17 +0800
Wire the inline-data guard and its three sub-checks into the filecheck
validator: allocated clusters on an inline inode, an id_count beyond the
space available in the inode block, and an i_size beyond id_count.
The size-without-clusters check now needs an explicit goto bail. It
previously fell through to the bail label because it was the last check;
with checks following it, a later failure would overwrite its INVALIDINO
code and report the wrong reason.
The id_count maximum stays a signed int in the message.
ocfs2_max_inline_data_with_xattr() subtracts the unvalidated
i_xattr_inline_size and can go negative on small block sizes.
Link: https://lore.kernel.org/20261109122121.21473-28-joseph.qi@linux.alibaba.com
Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Heming Zhao <heming.zhao@suse.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
---
fs/ocfs2/inode.c | 34 ++++++++++++++++++++++++++++++++++
1 file changed, 34 insertions(+)
--- a/fs/ocfs2/inode.c~ocfs2-check-inline-data-dinodes-in-online-filecheck
+++ a/fs/ocfs2/inode.c
@@ -2105,6 +2105,40 @@ static int ocfs2_filecheck_validate_inod
(unsigned long long)bh->b_blocknr,
(unsigned long long)le64_to_cpu(di->i_size));
rc = -OCFS2_FILECHECK_ERR_INVALIDINO;
+ goto bail;
+ }
+
+ if (ocfs2_dinode_has_inline_data(di)) {
+ struct ocfs2_inline_data *data = &di->id2.i_data;
+
+ if (ocfs2_dinode_has_inline_clusters(di)) {
+ mlog(ML_ERROR,
+ "Filecheck: invalid dinode #%llu: %u clusters\n",
+ (unsigned long long)bh->b_blocknr,
+ le32_to_cpu(di->i_clusters));
+ rc = -OCFS2_FILECHECK_ERR_INVALIDINO;
+ goto bail;
+ }
+
+ if (ocfs2_dinode_has_oversized_inline_data(sb, di)) {
+ mlog(ML_ERROR,
+ "Filecheck: invalid dinode #%llu: inline data id_count %u exceeds max %d\n",
+ (unsigned long long)bh->b_blocknr,
+ le16_to_cpu(data->id_count),
+ ocfs2_max_inline_data_with_xattr(sb, di));
+ rc = -OCFS2_FILECHECK_ERR_INVALIDINO;
+ goto bail;
+ }
+
+ if (ocfs2_dinode_has_inline_size_over_count(di)) {
+ mlog(ML_ERROR,
+ "Filecheck: invalid dinode #%llu: inline data i_size %llu exceeds id_count %u\n",
+ (unsigned long long)bh->b_blocknr,
+ (unsigned long long)le64_to_cpu(di->i_size),
+ le16_to_cpu(data->id_count));
+ rc = -OCFS2_FILECHECK_ERR_INVALIDINO;
+ goto bail;
+ }
}
bail:
_
Patches currently in -mm which might be from joseph.qi@linux.alibaba.com are
ocfs2-exempt-orphaned-dinodes-from-the-zero-nlink-check.patch
ocfs2-abstract-the-zero-nlink-or-mode-dinode-check.patch
ocfs2-abstract-the-dinode-i_blkno-mismatch-check.patch
ocfs2-abstract-the-dinode-ocfs2_valid_fl-check.patch
ocfs2-abstract-the-dinode-fs_generation-mismatch-check.patch
ocfs2-abstract-the-dinode-suballoc-slot-checks.patch
ocfs2-abstract-the-dinode-suballoc-bit-check.patch
ocfs2-abstract-the-dinode-orphaned-slot-check.patch
ocfs2-abstract-the-dinode-dio-orphaned-slot-check.patch
ocfs2-abstract-the-inline-data-dinode-guard-and-cluster-check.patch
ocfs2-abstract-the-inline-data-id_count-bound-check.patch
ocfs2-abstract-the-inline-data-i_size-bound-check.patch
ocfs2-abstract-the-fast-symlink-dinode-guard-and-size-check.patch
ocfs2-abstract-the-fast-symlink-nul-termination-check.patch
ocfs2-abstract-the-chain-list-dinode-guard-and-count-check.patch
ocfs2-abstract-the-chain-list-next-free-record-check.patch
ocfs2-abstract-the-chain-list-bits-per-cluster-check.patch
ocfs2-abstract-the-dinode-refcount-location-check.patch
ocfs2-abstract-the-zero-extent-list-count-check.patch
ocfs2-abstract-the-oversized-extent-list-count-check.patch
ocfs2-abstract-the-extent-list-next-free-record-check.patch
ocfs2-report-unrepairable-corruption-from-online-filecheck-fix.patch
ocfs2-check-dinode-nlink-and-mode-in-online-filecheck.patch
ocfs2-check-dinode-suballoc-slot-in-online-filecheck.patch
ocfs2-check-dinode-suballoc-bit-in-online-filecheck.patch
ocfs2-check-dinode-orphaned-slots-in-online-filecheck.patch
ocfs2-check-inline-data-dinodes-in-online-filecheck.patch
ocfs2-check-fast-symlink-dinodes-in-online-filecheck.patch
ocfs2-check-chain-list-dinodes-in-online-filecheck.patch
ocfs2-check-dinode-refcount-location-in-online-filecheck.patch
ocfs2-check-extent-list-dinodes-in-online-filecheck.patch
reply other threads:[~2026-11-09 20:53 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261109205334.9FD1F1F0089F@smtp.kernel.org \
--to=akpm@linux-foundation.org \
--cc=joseph.qi@linux.alibaba.com \
--cc=mm-commits@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.