All of lore.kernel.org
 help / color / mirror / Atom feed
From: Denis Benato <denis.benato@linux.dev>
To: linux-kernel@vger.kernel.org
Cc: platform-driver-x86@vger.kernel.org, linux-input@vger.kernel.org,
	kernel@lists.opengamingcollective.org,
	"Benjamin Tissoires" <bentiss@kernel.org>,
	"Jiri Kosina" <jikos@kernel.org>,
	"Luke D . Jones" <luke@ljones.dev>,
	"Mateusz Schwartz" <matthew.schwartz@linux.dev>,
	"Denis Benato" <benato.denis96@gmail.com>,
	"Jonathan LoBue" <jlobue10@gmail.com>,
	"Khamunetri Clark" <khamunetriclark@gmail.com>,
	"Derek J. Clark" <derekjohn.clark@gmail.com>,
	"Joshua Leivenzon" <hacker1024@users.sourceforge.net>,
	"Nathan Chancellor" <nathan@kernel.org>,
	"Rebecca Mara Müller" <rebecca.mara@posteo.de>,
	"Ivan Levchenko" <me@livan.pro>,
	"Corentin Chary" <corentin.chary@gmail.com>,
	"Hans de Goede" <hansg@kernel.org>,
	"Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>,
	"Denis Benato" <denis.benato@linux.dev>
Subject: [PATCH v15 03/18] HID: asus: add gamepad configuration
Date: Tue, 10 Nov 2026 02:00:21 +0000	[thread overview]
Message-ID: <20261110020036.112884-4-denis.benato@linux.dev> (raw)
In-Reply-To: <20261110020036.112884-1-denis.benato@linux.dev>

Add the base configuration structures for the gamepad configuration,
detect capabilities and initialize the device in a known state.

The configuration interface exposes xbox_controller. Reading it
reports whether the handheld is presenting an Xbox gamepad, and
writing it switches that mode.

hid_asus_ally_reset_resume() now waits for the gamepad MCU to report
ready and returns that error. A reset resume can fail with -ENODEV
where it previously always succeeded.

Signed-off-by: Denis Benato <denis.benato@linux.dev>
Co-developed-by: Luke Jones <luke@ljones.dev>
Signed-off-by: Luke Jones <luke@ljones.dev>
Signed-off-by: Jonathan LoBue <jlobue10@gmail.com>
---
 drivers/hid/hid-asus.c | 332 ++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 330 insertions(+), 2 deletions(-)

diff --git a/drivers/hid/hid-asus.c b/drivers/hid/hid-asus.c
index 123ed945ea77..6d2e3676950c 100644
--- a/drivers/hid/hid-asus.c
+++ b/drivers/hid/hid-asus.c
@@ -28,6 +28,7 @@
 #include <linux/err.h>
 #include <linux/hid.h>
 #include <linux/jiffies.h>
+#include <linux/kstrtox.h>
 #include <linux/list.h>
 #include <linux/module.h>
 #include <linux/mutex.h>
@@ -37,6 +38,7 @@
 #include <linux/power_supply.h>
 #include <linux/rcupdate.h>
 #include <linux/stddef.h>
+#include <linux/sysfs.h>
 #include <linux/leds.h>
 #include <linux/types.h>
 #include <linux/unaligned.h>
@@ -78,6 +80,11 @@ MODULE_DESCRIPTION("Asus HID Keyboard and TouchPad");
 
 #define HID_ALLY_READY_MAX_TRIES 6
 
+#define ASUS_ALLY_XBOX_CONTROLLER_ENABLE 0x01
+#define ASUS_ALLY_XBOX_CONTROLLER_DISABLE 0x00
+
+#define ASUS_ALLY_CAPABILITY_SUPPORTED 0x01
+
 #define HID_INPUT_KEY_DELETE 0x4c
 #define HID_INPUT_KEY_F20 0x6f
 #define HID_INPUT_LCTRL_MODIFIER 0x01
@@ -204,6 +211,13 @@ struct ally_intf {
 	u8 cad_state;
 	unsigned long cad_last_event_time;
 	struct delayed_work resume_work;
+	/*
+	 * Sysfs groups hang off this interface's hdev. Numbers live in
+	 * ally_prefs so a re-probe can restore them; ownership of the
+	 * attributes is per device.
+	 */
+	bool sysfs_live;
+	bool cal_sysfs_live;
 	/* Deferred free through ally_free(): keeps the memory valid for RCU
 	 * readers that loaded drvdata->ally before the teardown unpublished
 	 * it (see hid_asus_ally_terminate()).
@@ -218,7 +232,7 @@ struct asus_drvdata {
 	struct input_dev *tp_kbd_input;
 	struct asus_worker *worker;
 	unsigned int kbd_backlight_brightness;
-	struct ally_intf *ally;
+	struct ally_intf __rcu *ally;
 	const struct asus_touchpad_info *tp;
 	struct power_supply *battery;
 	struct power_supply_desc battery_desc;
@@ -782,6 +796,280 @@ static int ally_get_endpoint_address(struct hid_device *hdev)
 	return ep->desc.bEndpointAddress;
 }
 
+/*
+ * Settings that must survive the controller powering off and coming back.
+ * No device or input pointers live here: every transfer uses the interface
+ * that is bound right now.
+ *
+ * One set for the machine is by design. The Ally controller is
+ * part of the PC, so two ROG Ally HID devices are not bound at
+ * once. The only way to see a second one is to emulate it with
+ * uhid, but that would get rejected by the driver meaning that
+ * this struct can be used on a per-machine basis.
+ */
+static struct ally_prefs {
+	/* Guards every field below, including across the feature report. */
+	struct mutex lock;
+
+	bool initialized;
+
+	bool is_ally_x;
+	bool xbox_controller_support;
+	bool user_cal_support;
+	bool turbo_support;
+	bool resp_curve_support;
+	bool dir_to_btn_support;
+	bool gyro_support;
+	bool anti_deadzone_support;
+
+	bool xbox_controller_enabled;
+	u8 gamepad_mode;
+} ally_prefs = {
+	.lock = __MUTEX_INITIALIZER(ally_prefs.lock),
+};
+
+/**
+ * ally_check_capability() - Check if a specific capability is supported
+ * @hdev: HID device to query
+ * @check_cmd: capability command code
+ *
+ * Return: 1 if the capability is supported, 0 if not, negative on error.
+ */
+static int ally_check_capability(struct hid_device *hdev,
+				  enum ally_command_codes check_cmd)
+{
+	const u8 payload[] = {};
+	size_t buf_len;
+	int ret;
+
+	u8 *buf __free(kfree) = ally_alloc_cmd(hdev, check_cmd, payload,
+					       sizeof(payload), &buf_len);
+
+	if (!buf) {
+		hid_err(hdev, "Failed to allocate buffer for capability check.\n");
+		return -ENOMEM;
+	}
+
+	if (buf_len < 5) {
+		hid_err(hdev, "Capability check response too short.\n");
+		return -EINVAL;
+	}
+
+	ret = ally_gamepad_send_receive_packet(hdev, buf, buf_len);
+	if (ret < 0) {
+		hid_err(hdev, "Failed to check capability 0x%02x: %d\n", check_cmd, ret);
+		return ret;
+	}
+
+	return buf[1] == HID_ALLY_FEATURE_CODE_PAGE && buf[2] == check_cmd &&
+	       buf[4] == ASUS_ALLY_CAPABILITY_SUPPORTED;
+}
+
+static int ally_detect_capabilities(struct hid_device *hdev)
+{
+	int ret;
+
+	guard(mutex)(&ally_prefs.lock);
+
+	ally_prefs.is_ally_x = (hdev->product == USB_DEVICE_ID_ASUSTEK_ROG_NKEY_ALLY_X);
+
+	ret = ally_check_capability(hdev, CMD_CHECK_XBOX_SUPPORT);
+	if (ret < 0)
+		return ret;
+	ally_prefs.xbox_controller_support = ret;
+
+
+	ret = ally_check_capability(hdev, CMD_CHECK_USER_CAL_SUPPORT);
+	if (ret < 0)
+		return ret;
+	ally_prefs.user_cal_support = ret;
+
+	ret = ally_check_capability(hdev, CMD_CHECK_TURBO_SUPPORT);
+	if (ret < 0)
+		return ret;
+	ally_prefs.turbo_support = ret;
+
+	ret = ally_check_capability(hdev, CMD_CHECK_RESP_CURVE_SUPPORT);
+	if (ret < 0)
+		return ret;
+	ally_prefs.resp_curve_support = ret;
+
+	ret = ally_check_capability(hdev, CMD_CHECK_DIR_TO_BTN_SUPPORT);
+	if (ret < 0)
+		return ret;
+	ally_prefs.dir_to_btn_support = ret;
+
+	ret = ally_check_capability(hdev, CMD_CHECK_GYRO_TO_JOYSTICK);
+	if (ret < 0)
+		return ret;
+	ally_prefs.gyro_support = ret;
+
+	ret = ally_check_capability(hdev, CMD_CHECK_ANTI_DEADZONE);
+	if (ret < 0)
+		return ret;
+	ally_prefs.anti_deadzone_support = ret;
+
+	return 0;
+}
+
+/**
+ * ally_set_xbox_controller() - Enable or disable Xbox controller mode
+ * @hdev: HID device on which the command packet is sent
+ * @enabled: true to enable Xbox controller mode, false to disable it
+ *
+ * Builds a %CMD_SET_XBOX_CONTROLLER packet and sends it to the device. On
+ * success, the new state is stored in ally_prefs.xbox_controller_enabled.
+ *
+ * Context: Caller must hold ally_prefs.lock.
+ *
+ * Return: 0 on success, -%EOPNOTSUPP if Xbox controller mode is not
+ * supported, -%ENOMEM if the command buffer allocation fails, or a negative
+ * errno from ally_gamepad_send_packet() if sending the packet fails.
+ */
+static int ally_set_xbox_controller(struct hid_device *hdev, bool enabled)
+{
+	const u8 payload[] = { enabled ?
+				ASUS_ALLY_XBOX_CONTROLLER_ENABLE :
+				ASUS_ALLY_XBOX_CONTROLLER_DISABLE };
+	size_t buf_len;
+	int ret;
+
+	if (!ally_prefs.xbox_controller_support)
+		return -EOPNOTSUPP;
+
+	u8 *buf __free(kfree) = ally_alloc_cmd(hdev, CMD_SET_XBOX_CONTROLLER,
+					       payload, sizeof(payload),
+					       &buf_len);
+
+	if (!buf)
+		return -ENOMEM;
+
+	ret = ally_gamepad_send_packet(hdev, buf, buf_len);
+	if (ret < 0) {
+		hid_err(hdev, "Failed to set Xbox controller mode: %d\n", ret);
+		return ret;
+	}
+
+	ally_prefs.xbox_controller_enabled = enabled;
+	return 0;
+}
+
+static ssize_t xbox_controller_show(struct device *dev,
+				    struct device_attribute *attr, char *buf)
+{
+	guard(mutex)(&ally_prefs.lock);
+
+	if (!ally_prefs.xbox_controller_support)
+		return -EOPNOTSUPP;
+
+	return sysfs_emit(buf, "%d\n", ally_prefs.xbox_controller_enabled ? 1 : 0);
+}
+
+static ssize_t xbox_controller_store(struct device *dev,
+				     struct device_attribute *attr,
+				     const char *buf, size_t count)
+{
+	struct hid_device *hdev = to_hid_device(dev);
+	bool enabled;
+	int ret;
+
+	ret = kstrtobool(buf, &enabled);
+	if (ret)
+		return ret;
+
+	guard(mutex)(&ally_prefs.lock);
+
+	if (!ally_prefs.xbox_controller_support)
+		return -EOPNOTSUPP;
+
+	ret = ally_set_xbox_controller(hdev, enabled);
+	if (ret < 0)
+		return ret;
+
+	sysfs_notify(&dev->kobj, NULL, "xbox_controller");
+
+	return count;
+}
+
+static DEVICE_ATTR_RW(xbox_controller);
+
+static struct attribute *ally_config_attrs[] = {
+	&dev_attr_xbox_controller.attr,
+	NULL
+};
+
+static const struct attribute_group ally_attr_groups[] = {
+	{
+		.attrs = ally_config_attrs,
+	},
+};
+
+static int ally_prefs_setup(struct hid_device *hdev, struct ally_intf *intf)
+{
+	int ret, i;
+
+	ret = ally_detect_capabilities(hdev);
+	if (ret) {
+		hid_err(hdev, "Failed to detect capabilities: %d\n", ret);
+		return ret;
+	}
+
+	scoped_guard(mutex, &ally_prefs.lock) {
+		if (!ally_prefs.initialized) {
+			ally_prefs.gamepad_mode = 0x01;
+			ally_prefs.xbox_controller_enabled = true;
+			ally_prefs.initialized = true;
+		}
+
+		if (intf->sysfs_live)
+			return 0;
+	}
+
+	/*
+	 * Create and remove sysfs groups without ally_prefs.lock. Attribute
+	 * methods take that lock while holding a kernfs active reference;
+	 * removing a group drains those references, so locking here would
+	 * invert the order and deadlock.
+	 */
+	for (i = 0; i < ARRAY_SIZE(ally_attr_groups); i++) {
+		ret = sysfs_create_group(&hdev->dev.kobj, &ally_attr_groups[i]);
+		if (ret) {
+			hid_err(hdev, "Failed to create Ally sysfs group '%s': %d\n",
+				ally_attr_groups[i].name ?: "", ret);
+			while (i--)
+				sysfs_remove_group(&hdev->dev.kobj, &ally_attr_groups[i]);
+			return ret;
+		}
+	}
+
+	scoped_guard(mutex, &ally_prefs.lock) {
+		intf->sysfs_live = true;
+	}
+
+	return 0;
+}
+
+static void ally_sysfs_remove(struct hid_device *hdev, struct ally_intf *intf)
+{
+	int i;
+
+	if (!intf)
+		return;
+
+	if (ally_get_endpoint_address(hdev) != HID_ALLY_INTF_CFG_IN)
+		return;
+
+	scoped_guard(mutex, &ally_prefs.lock) {
+		if (!intf->sysfs_live)
+			return;
+
+		intf->sysfs_live = false;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(ally_attr_groups); i++)
+		sysfs_remove_group(&hdev->dev.kobj, &ally_attr_groups[i]);
+}
+
 struct ally_x_input_report {
 	__le16 x, y;
 	__le16 rx, ry;
@@ -958,12 +1246,25 @@ static int hid_asus_ally_init(struct hid_device *hdev)
 {
 	int ret;
 
+	/*
+	 * The sysfs attributes are already live when this runs: hold the
+	 * lock across both feature report transfers so they cannot
+	 * interleave with the set report of xbox_controller_store().
+	 */
+	guard(mutex)(&ally_prefs.lock);
+
 	/* Failure at this point is non-critical. The packet goes to this interface. */
 	ret = ally_gamepad_send_packet(hdev, ally_force_feedback_off,
 				       sizeof(ally_force_feedback_off));
 	if (ret < 0)
 		hid_err(hdev, "Ally failed to init force-feedback off: %d\n", ret);
 
+	if (ally_prefs.initialized && ally_prefs.xbox_controller_support) {
+		ret = ally_set_xbox_controller(hdev, ally_prefs.xbox_controller_enabled);
+		if (ret < 0)
+			hid_warn(hdev, "Failed to apply Xbox controller mode: %d\n", ret);
+	}
+
 	return 0;
 }
 
@@ -1051,6 +1352,9 @@ static struct ally_intf *hid_asus_ally_probe(struct hid_device *hdev)
 		/*
 		 * This function assumes the asus-specific initialization
 		 * to have been performed already at this point.
+		 *
+		 * The sysfs group does not exist yet, so this handshake
+		 * cannot race xbox_controller_store(): no lock needed.
 		 */
 		ret = ally_gamepad_check_ready(hdev);
 		if (ret < 0) {
@@ -1058,6 +1362,12 @@ static struct ally_intf *hid_asus_ally_probe(struct hid_device *hdev)
 			return ERR_PTR(ret);
 		}
 
+		ret = ally_prefs_setup(hdev, intf);
+		if (ret < 0) {
+			hid_err(hdev, "Failed to create Ally cfg: %d\n", ret);
+			return ERR_PTR(ret);
+		}
+
 		hid_asus_ally_init(hdev);
 		break;
 	case HID_ALLY_X_INTF_IN:
@@ -1078,7 +1388,7 @@ static struct ally_intf *hid_asus_ally_probe(struct hid_device *hdev)
 
 static int hid_asus_ally_reset_resume(struct hid_device *hdev, struct ally_intf *intf)
 {
-	int ep;
+	int ep, ret;
 
 	/*
 	 * The extensions failed to probe and the device is operating as a
@@ -1091,6 +1401,23 @@ static int hid_asus_ally_reset_resume(struct hid_device *hdev, struct ally_intf
 	if (ep != HID_ALLY_INTF_CFG_IN)
 		return 0;
 
+	/*
+	 * The sysfs attributes stay live across suspend: hold the lock while
+	 * running the ready handshake so xbox_controller_store() cannot
+	 * interleave its set report between the check-ready set and get
+	 * report, or send a command before the MCU is ready. Release before
+	 * hid_asus_ally_init(): it takes the lock itself and re-applies the
+	 * stored configuration, so a store landing in between is applied
+	 * against an MCU that already passed the ready check and is then
+	 * restored by the init itself.
+	 */
+	scoped_guard(mutex, &ally_prefs.lock)
+		ret = ally_gamepad_check_ready(hdev);
+	if (ret < 0) {
+		hid_err(hdev, "ROG Ally device is not ready: %d\n", ret);
+		return ret;
+	}
+
 	return hid_asus_ally_init(hdev);
 }
 
@@ -1120,6 +1447,7 @@ static struct ally_intf *hid_asus_ally_terminate(struct asus_drvdata *drvdata)
 
 	ally_quiesce(ally);
 	ally_unregister_gamepad(ally);
+	ally_sysfs_remove(drvdata->hdev, ally);
 
 	return ally;
 }
-- 
2.47.3


  parent reply	other threads:[~2026-11-10  2:00 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-10  2:00 [PATCH v15 00/18] HID: asus: add support for ROG Ally handhelds Denis Benato
2026-11-10  2:00 ` [PATCH v15 01/18] HID: asus: size feature reports from the HID report descriptor Denis Benato
2026-11-10  2:24   ` sashiko-bot
2026-11-10  2:00 ` [PATCH v15 02/18] HID: asus: add support for ROG Ally handhelds Denis Benato
2026-11-10  2:26   ` sashiko-bot
2026-11-10  2:00 ` Denis Benato [this message]
2026-11-10  2:00 ` [PATCH v15 04/18] HID: asus: add vibration strength configuration Denis Benato
2026-11-10  2:00 ` [PATCH v15 05/18] HID: asus: add joysticks inner and outer range configuration Denis Benato
2026-11-10  2:00 ` [PATCH v15 06/18] HID: asus: add triggers " Denis Benato
2026-11-10  2:00 ` [PATCH v15 07/18] HID: asus: add joysticks anti-deadzone configuration Denis Benato
2026-11-10  2:00 ` [PATCH v15 08/18] HID: asus: add support for response curve Denis Benato
2026-11-10  2:00 ` [PATCH v15 09/18] HID: asus: add support to force feedback Denis Benato
2026-11-10  2:00 ` [PATCH v15 10/18] HID: asus: add support for gamepad mode Denis Benato
2026-11-10  2:00 ` [PATCH v15 11/18] HID: asus: add support for turbo buttons Denis Benato
2026-11-10  2:10   ` sashiko-bot
2026-11-10  2:00 ` [PATCH v15 12/18] HID: asus: add support for btn remapping Denis Benato
2026-11-10  2:17   ` sashiko-bot
2026-11-10  2:00 ` [PATCH v15 13/18] HID: asus: identify XG Mobile stations and bind the LED to the reported model Denis Benato
2026-11-10  2:00 ` [PATCH v15 14/18] HID: asus: expose XG Mobile identity and firmware information Denis Benato
2026-11-10  2:00 ` [PATCH v15 15/18] HID: asus: document ROG XG Mobile sysfs attributes Denis Benato
2026-11-10  2:00 ` [PATCH v15 16/18] HID: asus: document ROG Ally " Denis Benato
2026-11-10  2:00 ` [PATCH v15 17/18] platform/x86: asus-armoury: pick the eGPU activation from the reported GPU Denis Benato
2026-11-10  2:00 ` [PATCH v15 18/18] MAINTAINERS: add maintainer for the ASUS HID driver Denis Benato

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261110020036.112884-4-denis.benato@linux.dev \
    --to=denis.benato@linux.dev \
    --cc=benato.denis96@gmail.com \
    --cc=bentiss@kernel.org \
    --cc=corentin.chary@gmail.com \
    --cc=derekjohn.clark@gmail.com \
    --cc=hacker1024@users.sourceforge.net \
    --cc=hansg@kernel.org \
    --cc=ilpo.jarvinen@linux.intel.com \
    --cc=jikos@kernel.org \
    --cc=jlobue10@gmail.com \
    --cc=kernel@lists.opengamingcollective.org \
    --cc=khamunetriclark@gmail.com \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=luke@ljones.dev \
    --cc=matthew.schwartz@linux.dev \
    --cc=me@livan.pro \
    --cc=nathan@kernel.org \
    --cc=platform-driver-x86@vger.kernel.org \
    --cc=rebecca.mara@posteo.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.