From: Sasha Levin <sashal@kernel.org>
To: stable@vger.kernel.org
Cc: Balakrishnan Sambath <balakrishnan.s@microchip.com>,
Eugen Hristev <ehristev@kernel.org>,
Hans Verkuil <hverkuil+cisco@kernel.org>,
Sasha Levin <sashal@kernel.org>
Subject: [PATCH 6.6.y 1/2] media: microchip-isc: store the unshifted PFE_CFG0 BPS value
Date: Mon, 9 Nov 2026 23:36:32 -0500 [thread overview]
Message-ID: <20261110043626.355449-1-sashal@kernel.org> (raw)
In-Reply-To: <20261107052851-failed-6.6-6e9eaa3b9387@kernel.org>
From: Balakrishnan Sambath <balakrishnan.s@microchip.com>
[ Upstream commit 14cbe597504a04c5c49342d0566438e2b438a948 ]
pfe_cfg0_bps held a pre-shifted BPS value (ISC_PFE_CFG0_BPS_EIGHT was
0x4 << 28) ORed straight into the register. The other format selectors
like cfa_baycfg store the bare field value and position it at the write,
so this one was inconsistent.
Store the bare BPS value and apply it with FIELD_PREP() at the PFE_CFG0
write, and fix the pfe_cfg0_bps comment to match. No functional change.
Suggested-by: Eugen Hristev <ehristev@kernel.org>
Signed-off-by: Balakrishnan Sambath <balakrishnan.s@microchip.com>
Reviewed-by: Eugen Hristev <ehristev@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Stable-dep-of: 6e9eaa3b9387 ("media: microchip-isc: fix WB offset and gain register field masking")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/platform/microchip/microchip-isc-base.c | 4 +++-
drivers/media/platform/microchip/microchip-isc-regs.h | 10 +++++-----
drivers/media/platform/microchip/microchip-isc.h | 4 +++-
3 files changed, 11 insertions(+), 7 deletions(-)
diff --git a/drivers/media/platform/microchip/microchip-isc-base.c b/drivers/media/platform/microchip/microchip-isc-base.c
index 8bafe1824ca15..8a1ebb1a74e00 100644
--- a/drivers/media/platform/microchip/microchip-isc-base.c
+++ b/drivers/media/platform/microchip/microchip-isc-base.c
@@ -8,6 +8,7 @@
* Author: Eugen Hristev <eugen.hristev@microchip.com>
*
*/
+#include <linux/bitfield.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/math64.h>
@@ -291,7 +292,8 @@ static int isc_configure(struct isc_device *isc)
struct isc_subdev_entity *subdev = isc->current_subdev;
int ret;
- pfe_cfg0 = isc->config.sd_format->pfe_cfg0_bps;
+ pfe_cfg0 = FIELD_PREP(ISC_PFE_CFG0_BPS_MASK,
+ isc->config.sd_format->pfe_cfg0_bps);
pipeline = isc->config.bits_pipeline;
dcfg = isc->config.dcfg_imode | isc->dcfg;
diff --git a/drivers/media/platform/microchip/microchip-isc-regs.h b/drivers/media/platform/microchip/microchip-isc-regs.h
index e77e1d9a1db87..185ef0eab7ad3 100644
--- a/drivers/media/platform/microchip/microchip-isc-regs.h
+++ b/drivers/media/platform/microchip/microchip-isc-regs.h
@@ -31,11 +31,11 @@
#define ISC_PFE_CFG0_MODE_PROGRESSIVE (0x0 << 4)
#define ISC_PFE_CFG0_MODE_MASK GENMASK(6, 4)
-#define ISC_PFE_CFG0_BPS_EIGHT (0x4 << 28)
-#define ISC_PFG_CFG0_BPS_NINE (0x3 << 28)
-#define ISC_PFG_CFG0_BPS_TEN (0x2 << 28)
-#define ISC_PFG_CFG0_BPS_ELEVEN (0x1 << 28)
-#define ISC_PFG_CFG0_BPS_TWELVE (0x0 << 28)
+#define ISC_PFE_CFG0_BPS_EIGHT 0x4
+#define ISC_PFG_CFG0_BPS_NINE 0x3
+#define ISC_PFG_CFG0_BPS_TEN 0x2
+#define ISC_PFG_CFG0_BPS_ELEVEN 0x1
+#define ISC_PFG_CFG0_BPS_TWELVE 0x0
#define ISC_PFE_CFG0_BPS_MASK GENMASK(30, 28)
#define ISC_PFE_CFG0_COLEN BIT(12)
diff --git a/drivers/media/platform/microchip/microchip-isc.h b/drivers/media/platform/microchip/microchip-isc.h
index f5e322c2e36bc..d7bcd74efff92 100644
--- a/drivers/media/platform/microchip/microchip-isc.h
+++ b/drivers/media/platform/microchip/microchip-isc.h
@@ -62,7 +62,9 @@ struct isc_subdev_entity {
* @mbus_code: V4L2 media bus format code.
* @cfa_baycfg: If this format is RAW BAYER, indicate the type of bayer.
this is either BGBG, RGRG, etc.
- * @pfe_cfg0_bps: Number of hardware data lines connected to the ISC
+ * @pfe_cfg0_bps: ISC_PFE_CFG0 BPS field value (e.g. ISC_PFE_CFG0_BPS_EIGHT),
+ written into PFE_CFG0 with FIELD_PREP(ISC_PFE_CFG0_BPS_MASK)
+ at configure time.
* @raw: If the format is raw bayer.
*/
--
2.53.0
next prev parent reply other threads:[~2026-11-10 4:36 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-07 10:28 FAILED: patch "[PATCH] media: microchip-isc: fix WB offset and gain register field masking" failed to apply to 6.6-stable tree Sasha Levin
2026-11-10 4:36 ` Sasha Levin [this message]
2026-11-10 4:36 ` [PATCH 6.6.y 2/2] media: microchip-isc: fix WB offset and gain register field masking Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261110043626.355449-1-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=balakrishnan.s@microchip.com \
--cc=ehristev@kernel.org \
--cc=hverkuil+cisco@kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.