From: Sasha Levin <sashal@kernel.org>
To: stable@vger.kernel.org
Cc: Casey Connolly <casey.connolly@linaro.org>,
Sebastian Reichel <sebastian.reichel@collabora.com>,
Sasha Levin <sashal@kernel.org>
Subject: [PATCH 6.12.y 1/2] power: supply: pmi8998_charger: rename to qcom_smbx
Date: Tue, 10 Nov 2026 07:25:48 -0500 [thread overview]
Message-ID: <20261110122522.1154709-1-sashal@kernel.org> (raw)
In-Reply-To: <20261107051650-failed-6.12-a2d7dc538da2@kernel.org>
From: Casey Connolly <casey.connolly@linaro.org>
[ Upstream commit 5ec53bcc7fce6801977a0c125fb726d7b0e9102c ]
Prepare to add smb5 support by making variables and the file name more
generic. Also take the opportunity to remove the "_charger" suffix since
smb2 always refers to a charger.
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
Link: https://lore.kernel.org/r/20250619-smb2-smb5-support-v1-4-ac5dec51b6e1@linaro.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Stable-dep-of: a2d7dc538da2 ("power: supply: qcom_smbx: validate battery float voltage")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/power/supply/Makefile | 2 +-
.../{qcom_pmi8998_charger.c => qcom_smbx.c} | 148 +++++++++---------
2 files changed, 75 insertions(+), 75 deletions(-)
rename drivers/power/supply/{qcom_pmi8998_charger.c => qcom_smbx.c} (88%)
diff --git a/drivers/power/supply/Makefile b/drivers/power/supply/Makefile
index 8dcb415453171..6673860ff26c1 100644
--- a/drivers/power/supply/Makefile
+++ b/drivers/power/supply/Makefile
@@ -115,5 +115,5 @@ obj-$(CONFIG_BATTERY_ACER_A500) += acer_a500_battery.o
obj-$(CONFIG_BATTERY_SURFACE) += surface_battery.o
obj-$(CONFIG_CHARGER_SURFACE) += surface_charger.o
obj-$(CONFIG_BATTERY_UG3105) += ug3105_battery.o
-obj-$(CONFIG_CHARGER_QCOM_SMB2) += qcom_pmi8998_charger.o
+obj-$(CONFIG_CHARGER_QCOM_SMB2) += qcom_smbx.o
obj-$(CONFIG_FUEL_GAUGE_MM8013) += mm8013.o
diff --git a/drivers/power/supply/qcom_pmi8998_charger.c b/drivers/power/supply/qcom_smbx.c
similarity index 88%
rename from drivers/power/supply/qcom_pmi8998_charger.c
rename to drivers/power/supply/qcom_smbx.c
index d4c9f85654da3..c5ac09469650a 100644
--- a/drivers/power/supply/qcom_pmi8998_charger.c
+++ b/drivers/power/supply/qcom_smbx.c
@@ -364,17 +364,17 @@ enum charger_status {
DISABLE_CHARGE,
};
-struct smb2_register {
+struct smb_init_register {
u16 addr;
u8 mask;
u8 val;
};
/**
- * struct smb2_chip - smb2 chip structure
+ * struct smb_chip - smb chip structure
* @dev: Device reference for power_supply
* @name: The platform device name
- * @base: Base address for smb2 registers
+ * @base: Base address for smb registers
* @regmap: Register map
* @batt_info: Battery data from DT
* @status_change_work: Worker to handle plug/unplug events
@@ -384,7 +384,7 @@ struct smb2_register {
* @usb_in_v_chan: USB_IN voltage measurement channel
* @chg_psy: Charger power supply instance
*/
-struct smb2_chip {
+struct smb_chip {
struct device *dev;
const char *name;
unsigned int base;
@@ -401,7 +401,7 @@ struct smb2_chip {
struct power_supply *chg_psy;
};
-static enum power_supply_property smb2_properties[] = {
+static enum power_supply_property smb_properties[] = {
POWER_SUPPLY_PROP_MANUFACTURER,
POWER_SUPPLY_PROP_MODEL_NAME,
POWER_SUPPLY_PROP_CURRENT_MAX,
@@ -413,7 +413,7 @@ static enum power_supply_property smb2_properties[] = {
POWER_SUPPLY_PROP_USB_TYPE,
};
-static int smb2_get_prop_usb_online(struct smb2_chip *chip, int *val)
+static int smb_get_prop_usb_online(struct smb_chip *chip, int *val)
{
unsigned int stat;
int rc;
@@ -433,13 +433,13 @@ static int smb2_get_prop_usb_online(struct smb2_chip *chip, int *val)
* Qualcomm "automatic power source detection" aka APSD
* tells us what type of charger we're connected to.
*/
-static int smb2_apsd_get_charger_type(struct smb2_chip *chip, int *val)
+static int smb_apsd_get_charger_type(struct smb_chip *chip, int *val)
{
unsigned int apsd_stat, stat;
int usb_online = 0;
int rc;
- rc = smb2_get_prop_usb_online(chip, &usb_online);
+ rc = smb_get_prop_usb_online(chip, &usb_online);
if (!usb_online) {
*val = POWER_SUPPLY_USB_TYPE_UNKNOWN;
return rc;
@@ -473,13 +473,13 @@ static int smb2_apsd_get_charger_type(struct smb2_chip *chip, int *val)
return 0;
}
-static int smb2_get_prop_status(struct smb2_chip *chip, int *val)
+static int smb_get_prop_status(struct smb_chip *chip, int *val)
{
unsigned char stat[2];
int usb_online = 0;
int rc;
- rc = smb2_get_prop_usb_online(chip, &usb_online);
+ rc = smb_get_prop_usb_online(chip, &usb_online);
if (!usb_online) {
*val = POWER_SUPPLY_STATUS_DISCHARGING;
return rc;
@@ -521,7 +521,7 @@ static int smb2_get_prop_status(struct smb2_chip *chip, int *val)
}
}
-static inline int smb2_get_current_limit(struct smb2_chip *chip,
+static inline int smb_get_current_limit(struct smb_chip *chip,
unsigned int *val)
{
int rc = regmap_read(chip->regmap, chip->base + ICL_STATUS, val);
@@ -531,7 +531,7 @@ static inline int smb2_get_current_limit(struct smb2_chip *chip,
return rc;
}
-static int smb2_set_current_limit(struct smb2_chip *chip, unsigned int val)
+static int smb_set_current_limit(struct smb_chip *chip, unsigned int val)
{
unsigned char val_raw;
@@ -546,22 +546,22 @@ static int smb2_set_current_limit(struct smb2_chip *chip, unsigned int val)
val_raw);
}
-static void smb2_status_change_work(struct work_struct *work)
+static void smb_status_change_work(struct work_struct *work)
{
unsigned int charger_type, current_ua;
int usb_online = 0;
int count, rc;
- struct smb2_chip *chip;
+ struct smb_chip *chip;
- chip = container_of(work, struct smb2_chip, status_change_work.work);
+ chip = container_of(work, struct smb_chip, status_change_work.work);
- smb2_get_prop_usb_online(chip, &usb_online);
+ smb_get_prop_usb_online(chip, &usb_online);
if (!usb_online)
return;
for (count = 0; count < 3; count++) {
dev_dbg(chip->dev, "get charger type retry %d\n", count);
- rc = smb2_apsd_get_charger_type(chip, &charger_type);
+ rc = smb_apsd_get_charger_type(chip, &charger_type);
if (rc != -EAGAIN)
break;
msleep(100);
@@ -594,11 +594,11 @@ static void smb2_status_change_work(struct work_struct *work)
break;
}
- smb2_set_current_limit(chip, current_ua);
+ smb_set_current_limit(chip, current_ua);
power_supply_changed(chip->chg_psy);
}
-static int smb2_get_iio_chan(struct smb2_chip *chip, struct iio_channel *chan,
+static int smb_get_iio_chan(struct smb_chip *chip, struct iio_channel *chan,
int *val)
{
int rc;
@@ -619,7 +619,7 @@ static int smb2_get_iio_chan(struct smb2_chip *chip, struct iio_channel *chan,
return iio_read_channel_processed(chan, val);
}
-static int smb2_get_prop_health(struct smb2_chip *chip, int *val)
+static int smb_get_prop_health(struct smb_chip *chip, int *val)
{
int rc;
unsigned int stat;
@@ -647,11 +647,11 @@ static int smb2_get_prop_health(struct smb2_chip *chip, int *val)
return 0;
}
-static int smb2_get_property(struct power_supply *psy,
+static int smb_get_property(struct power_supply *psy,
enum power_supply_property psp,
union power_supply_propval *val)
{
- struct smb2_chip *chip = power_supply_get_drvdata(psy);
+ struct smb_chip *chip = power_supply_get_drvdata(psy);
switch (psp) {
case POWER_SUPPLY_PROP_MANUFACTURER:
@@ -661,43 +661,43 @@ static int smb2_get_property(struct power_supply *psy,
val->strval = chip->name;
return 0;
case POWER_SUPPLY_PROP_CURRENT_MAX:
- return smb2_get_current_limit(chip, &val->intval);
+ return smb_get_current_limit(chip, &val->intval);
case POWER_SUPPLY_PROP_CURRENT_NOW:
- return smb2_get_iio_chan(chip, chip->usb_in_i_chan,
+ return smb_get_iio_chan(chip, chip->usb_in_i_chan,
&val->intval);
case POWER_SUPPLY_PROP_VOLTAGE_NOW:
- return smb2_get_iio_chan(chip, chip->usb_in_v_chan,
+ return smb_get_iio_chan(chip, chip->usb_in_v_chan,
&val->intval);
case POWER_SUPPLY_PROP_ONLINE:
- return smb2_get_prop_usb_online(chip, &val->intval);
+ return smb_get_prop_usb_online(chip, &val->intval);
case POWER_SUPPLY_PROP_STATUS:
- return smb2_get_prop_status(chip, &val->intval);
+ return smb_get_prop_status(chip, &val->intval);
case POWER_SUPPLY_PROP_HEALTH:
- return smb2_get_prop_health(chip, &val->intval);
+ return smb_get_prop_health(chip, &val->intval);
case POWER_SUPPLY_PROP_USB_TYPE:
- return smb2_apsd_get_charger_type(chip, &val->intval);
+ return smb_apsd_get_charger_type(chip, &val->intval);
default:
dev_err(chip->dev, "invalid property: %d\n", psp);
return -EINVAL;
}
}
-static int smb2_set_property(struct power_supply *psy,
+static int smb_set_property(struct power_supply *psy,
enum power_supply_property psp,
const union power_supply_propval *val)
{
- struct smb2_chip *chip = power_supply_get_drvdata(psy);
+ struct smb_chip *chip = power_supply_get_drvdata(psy);
switch (psp) {
case POWER_SUPPLY_PROP_CURRENT_MAX:
- return smb2_set_current_limit(chip, val->intval);
+ return smb_set_current_limit(chip, val->intval);
default:
dev_err(chip->dev, "No setter for property: %d\n", psp);
return -EINVAL;
}
}
-static int smb2_property_is_writable(struct power_supply *psy,
+static int smb_property_is_writable(struct power_supply *psy,
enum power_supply_property psp)
{
switch (psp) {
@@ -708,9 +708,9 @@ static int smb2_property_is_writable(struct power_supply *psy,
}
}
-static irqreturn_t smb2_handle_batt_overvoltage(int irq, void *data)
+static irqreturn_t smb_handle_batt_overvoltage(int irq, void *data)
{
- struct smb2_chip *chip = data;
+ struct smb_chip *chip = data;
unsigned int status;
int rc;
@@ -731,9 +731,9 @@ static irqreturn_t smb2_handle_batt_overvoltage(int irq, void *data)
return IRQ_HANDLED;
}
-static irqreturn_t smb2_handle_usb_plugin(int irq, void *data)
+static irqreturn_t smb_handle_usb_plugin(int irq, void *data)
{
- struct smb2_chip *chip = data;
+ struct smb_chip *chip = data;
power_supply_changed(chip->chg_psy);
@@ -743,18 +743,18 @@ static irqreturn_t smb2_handle_usb_plugin(int irq, void *data)
return IRQ_HANDLED;
}
-static irqreturn_t smb2_handle_usb_icl_change(int irq, void *data)
+static irqreturn_t smb_handle_usb_icl_change(int irq, void *data)
{
- struct smb2_chip *chip = data;
+ struct smb_chip *chip = data;
power_supply_changed(chip->chg_psy);
return IRQ_HANDLED;
}
-static irqreturn_t smb2_handle_wdog_bark(int irq, void *data)
+static irqreturn_t smb_handle_wdog_bark(int irq, void *data)
{
- struct smb2_chip *chip = data;
+ struct smb_chip *chip = data;
int rc;
power_supply_changed(chip->chg_psy);
@@ -767,22 +767,22 @@ static irqreturn_t smb2_handle_wdog_bark(int irq, void *data)
return IRQ_HANDLED;
}
-static const struct power_supply_desc smb2_psy_desc = {
+static const struct power_supply_desc smb_psy_desc = {
.name = "pmi8998_charger",
.type = POWER_SUPPLY_TYPE_USB,
.usb_types = BIT(POWER_SUPPLY_USB_TYPE_SDP) |
BIT(POWER_SUPPLY_USB_TYPE_CDP) |
BIT(POWER_SUPPLY_USB_TYPE_DCP) |
BIT(POWER_SUPPLY_USB_TYPE_UNKNOWN),
- .properties = smb2_properties,
- .num_properties = ARRAY_SIZE(smb2_properties),
- .get_property = smb2_get_property,
- .set_property = smb2_set_property,
- .property_is_writeable = smb2_property_is_writable,
+ .properties = smb_properties,
+ .num_properties = ARRAY_SIZE(smb_properties),
+ .get_property = smb_get_property,
+ .set_property = smb_set_property,
+ .property_is_writeable = smb_property_is_writable,
};
/* Init sequence derived from vendor downstream driver */
-static const struct smb2_register smb2_init_seq[] = {
+static const struct smb_init_register smb_init_seq[] = {
{ .addr = AICL_RERUN_TIME_CFG, .mask = AICL_RERUN_TIME_MASK, .val = 0 },
/*
* By default configure us as an upstream facing port
@@ -884,17 +884,17 @@ static const struct smb2_register smb2_init_seq[] = {
.val = 1000000 / CURRENT_SCALE_FACTOR },
};
-static int smb2_init_hw(struct smb2_chip *chip)
+static int smb_init_hw(struct smb_chip *chip)
{
int rc, i;
- for (i = 0; i < ARRAY_SIZE(smb2_init_seq); i++) {
+ for (i = 0; i < ARRAY_SIZE(smb_init_seq); i++) {
dev_dbg(chip->dev, "%d: Writing 0x%02x to 0x%02x\n", i,
- smb2_init_seq[i].val, smb2_init_seq[i].addr);
+ smb_init_seq[i].val, smb_init_seq[i].addr);
rc = regmap_update_bits(chip->regmap,
- chip->base + smb2_init_seq[i].addr,
- smb2_init_seq[i].mask,
- smb2_init_seq[i].val);
+ chip->base + smb_init_seq[i].addr,
+ smb_init_seq[i].mask,
+ smb_init_seq[i].val);
if (rc < 0)
return dev_err_probe(chip->dev, rc,
"%s: init command %d failed\n",
@@ -904,7 +904,7 @@ static int smb2_init_hw(struct smb2_chip *chip)
return 0;
}
-static int smb2_init_irq(struct smb2_chip *chip, int *irq, const char *name,
+static int smb_init_irq(struct smb_chip *chip, int *irq, const char *name,
irqreturn_t (*handler)(int irq, void *data))
{
int irqnum;
@@ -926,11 +926,11 @@ static int smb2_init_irq(struct smb2_chip *chip, int *irq, const char *name,
return 0;
}
-static int smb2_probe(struct platform_device *pdev)
+static int smb_probe(struct platform_device *pdev)
{
struct power_supply_config supply_config = {};
struct power_supply_desc *desc;
- struct smb2_chip *chip;
+ struct smb_chip *chip;
int rc, irq;
chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL);
@@ -961,17 +961,17 @@ static int smb2_probe(struct platform_device *pdev)
"Couldn't get usbin_i IIO channel\n");
}
- rc = smb2_init_hw(chip);
+ rc = smb_init_hw(chip);
if (rc < 0)
return rc;
supply_config.drv_data = chip;
supply_config.of_node = pdev->dev.of_node;
- desc = devm_kzalloc(chip->dev, sizeof(smb2_psy_desc), GFP_KERNEL);
+ desc = devm_kzalloc(chip->dev, sizeof(smb_psy_desc), GFP_KERNEL);
if (!desc)
return -ENOMEM;
- memcpy(desc, &smb2_psy_desc, sizeof(smb2_psy_desc));
+ memcpy(desc, &smb_psy_desc, sizeof(smb_psy_desc));
desc->name =
devm_kasprintf(chip->dev, GFP_KERNEL, "%s-charger",
(const char *)device_get_match_data(chip->dev));
@@ -990,7 +990,7 @@ static int smb2_probe(struct platform_device *pdev)
"Failed to get battery info\n");
rc = devm_delayed_work_autocancel(chip->dev, &chip->status_change_work,
- smb2_status_change_work);
+ smb_status_change_work);
if (rc)
return dev_err_probe(chip->dev, rc,
"Failed to init status change work\n");
@@ -1002,20 +1002,20 @@ static int smb2_probe(struct platform_device *pdev)
if (rc < 0)
return dev_err_probe(chip->dev, rc, "Couldn't set vbat max\n");
- rc = smb2_init_irq(chip, &irq, "bat-ov", smb2_handle_batt_overvoltage);
+ rc = smb_init_irq(chip, &irq, "bat-ov", smb_handle_batt_overvoltage);
if (rc < 0)
return rc;
- rc = smb2_init_irq(chip, &chip->cable_irq, "usb-plugin",
- smb2_handle_usb_plugin);
+ rc = smb_init_irq(chip, &chip->cable_irq, "usb-plugin",
+ smb_handle_usb_plugin);
if (rc < 0)
return rc;
- rc = smb2_init_irq(chip, &irq, "usbin-icl-change",
- smb2_handle_usb_icl_change);
+ rc = smb_init_irq(chip, &irq, "usbin-icl-change",
+ smb_handle_usb_icl_change);
if (rc < 0)
return rc;
- rc = smb2_init_irq(chip, &irq, "wdog-bark", smb2_handle_wdog_bark);
+ rc = smb_init_irq(chip, &irq, "wdog-bark", smb_handle_wdog_bark);
if (rc < 0)
return rc;
@@ -1031,22 +1031,22 @@ static int smb2_probe(struct platform_device *pdev)
return 0;
}
-static const struct of_device_id smb2_match_id_table[] = {
+static const struct of_device_id smb_match_id_table[] = {
{ .compatible = "qcom,pmi8998-charger", .data = "pmi8998" },
{ .compatible = "qcom,pm660-charger", .data = "pm660" },
{ /* sentinal */ }
};
-MODULE_DEVICE_TABLE(of, smb2_match_id_table);
+MODULE_DEVICE_TABLE(of, smb_match_id_table);
-static struct platform_driver qcom_spmi_smb2 = {
- .probe = smb2_probe,
+static struct platform_driver qcom_spmi_smb = {
+ .probe = smb_probe,
.driver = {
- .name = "qcom-pmi8998/pm660-charger",
- .of_match_table = smb2_match_id_table,
+ .name = "qcom-smbx-charger",
+ .of_match_table = smb_match_id_table,
},
};
-module_platform_driver(qcom_spmi_smb2);
+module_platform_driver(qcom_spmi_smb);
MODULE_AUTHOR("Caleb Connolly <caleb.connolly@linaro.org>");
MODULE_DESCRIPTION("Qualcomm SMB2 Charger Driver");
--
2.53.0
next prev parent reply other threads:[~2026-11-10 12:25 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-07 10:16 FAILED: patch "[PATCH] power: supply: qcom_smbx: validate battery float voltage" failed to apply to 6.12-stable tree Sasha Levin
2026-11-10 12:25 ` Sasha Levin [this message]
2026-11-10 12:25 ` [PATCH 6.12.y 2/2] power: supply: qcom_smbx: validate battery float voltage Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261110122522.1154709-1-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=casey.connolly@linaro.org \
--cc=sebastian.reichel@collabora.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.