From: phucduc.bui@gmail.com
To: Mark Brown <broonie@kernel.org>,
Claudiu Beznea <claudiu.beznea@tuxon.dev>,
Andrei Simion <andrei.simion@microchip.com>,
Nicolas Ferre <nicolas.ferre@microchip.com>,
Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>,
Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>,
Codrin Ciubotariu <codrin.ciubotariu@microchip.com>,
linux-sound@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
bui duc phuc <phucduc.bui@gmail.com>
Subject: [PATCH] ASoC: atmel-i2s: Use devm_clk_get_enabled() for pclk
Date: Wed, 11 Nov 2026 11:27:46 +0700 [thread overview]
Message-ID: <20261111042746.14714-1-phucduc.bui@gmail.com> (raw)
From: bui duc phuc <phucduc.bui@gmail.com>
The peripheral clock is only acquired and enabled once during
probe. Use devm_clk_get_enabled() to combine clock acquisition
and enabling into a single call.
This also removes the need for manual clock disable handling
on probe failures and in the remove callback, as the devm API
automatically handles clock cleanup.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
---
sound/soc/atmel/atmel-i2s.c | 25 ++++---------------------
1 file changed, 4 insertions(+), 21 deletions(-)
diff --git a/sound/soc/atmel/atmel-i2s.c b/sound/soc/atmel/atmel-i2s.c
index e1d8af056234..a3aeb8e607f6 100644
--- a/sound/soc/atmel/atmel-i2s.c
+++ b/sound/soc/atmel/atmel-i2s.c
@@ -660,8 +660,8 @@ static int atmel_i2s_probe(struct platform_device *pdev)
if (err)
return err;
- /* Get the peripheral clock. */
- dev->pclk = devm_clk_get(&pdev->dev, "pclk");
+ /* Get and enable the peripheral clock. */
+ dev->pclk = devm_clk_get_enabled(&pdev->dev, "pclk");
if (IS_ERR(dev->pclk))
return dev_err_probe(&pdev->dev, PTR_ERR(dev->pclk),
"failed to get the peripheral clock\n");
@@ -682,11 +682,6 @@ static int atmel_i2s_probe(struct platform_device *pdev)
return err;
}
- /* Enable the peripheral clock. */
- err = clk_prepare_enable(dev->pclk);
- if (err)
- return err;
-
/* Get IP version. */
regmap_read(dev->regmap, ATMEL_I2SC_VERSION, &version);
dev_info(&pdev->dev, "hw version: %#x\n", version);
@@ -698,10 +693,8 @@ static int atmel_i2s_probe(struct platform_device *pdev)
err = devm_snd_soc_register_component(&pdev->dev,
&atmel_i2s_component,
&atmel_i2s_dai, 1);
- if (err) {
- clk_disable_unprepare(dev->pclk);
+ if (err)
return err;
- }
/* Prepare DMA config. */
dev->playback.addr = (dma_addr_t)mem->start + ATMEL_I2SC_THR;
@@ -712,28 +705,18 @@ static int atmel_i2s_probe(struct platform_device *pdev)
if (of_property_match_string(np, "dma-names", "rx-tx") == 0)
pcm_flags |= SND_DMAENGINE_PCM_FLAG_HALF_DUPLEX;
err = devm_snd_dmaengine_pcm_register(&pdev->dev, NULL, pcm_flags);
- if (err) {
- clk_disable_unprepare(dev->pclk);
+ if (err)
return err;
- }
return 0;
}
-static void atmel_i2s_remove(struct platform_device *pdev)
-{
- struct atmel_i2s_dev *dev = platform_get_drvdata(pdev);
-
- clk_disable_unprepare(dev->pclk);
-}
-
static struct platform_driver atmel_i2s_driver = {
.driver = {
.name = "atmel_i2s",
.of_match_table = atmel_i2s_dt_ids,
},
.probe = atmel_i2s_probe,
- .remove = atmel_i2s_remove,
};
module_platform_driver(atmel_i2s_driver);
--
2.43.0
next reply other threads:[~2026-11-11 4:28 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-11 4:27 phucduc.bui [this message]
2026-11-11 4:35 ` [PATCH] ASoC: atmel-i2s: Use devm_clk_get_enabled() for pclk sashiko-bot
2026-11-11 4:43 ` Bui Duc Phuc
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261111042746.14714-1-phucduc.bui@gmail.com \
--to=phucduc.bui@gmail.com \
--cc=alexandre.belloni@bootlin.com \
--cc=andrei.simion@microchip.com \
--cc=broonie@kernel.org \
--cc=claudiu.beznea@tuxon.dev \
--cc=codrin.ciubotariu@microchip.com \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
--cc=nicolas.ferre@microchip.com \
--cc=perex@perex.cz \
--cc=tiwai@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.