From: Sasha Levin <sashal@kernel.org>
To: stable@vger.kernel.org
Cc: David Carlier <devnexen@gmail.com>,
Sakari Ailus <sakari.ailus@linux.intel.com>,
Sasha Levin <sashal@kernel.org>
Subject: [PATCH 7.3.y 2/2] media: ipu6: Fix firmware config leak on stream start
Date: Wed, 11 Nov 2026 12:21:13 -0500 [thread overview]
Message-ID: <20261111172105.3535158-2-sashal@kernel.org> (raw)
In-Reply-To: <20261111172105.3535158-1-sashal@kernel.org>
From: David Carlier <devnexen@gmail.com>
[ Upstream commit d3d9bc694fe087c672c3ad5871984dc45cd9f425 ]
ipu6_isys_fwcom_cfg_init() runs on every first stream start and allocates
the firmware config and queue configs with devm, so each STREAMON/STREAMOFF
cycle leaks them. They are only needed until ipu6_fw_com_prepare() has
copied them, so free them right after. Also check the return value, an
allocation failure would otherwise make ipu6_fw_com_prepare() dereference
a NULL queue config.
Fixes: f625e8d7ffc1 ("media: intel/ipu6: input system ABI between firmware and driver")
Cc: stable@vger.kernel.org
Signed-off-by: David Carlier <devnexen@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/media/pci/intel/ipu6/ipu6-fw-isys.c | 34 +++++++++++++++------
1 file changed, 24 insertions(+), 10 deletions(-)
diff --git a/drivers/media/pci/intel/ipu6/ipu6-fw-isys.c b/drivers/media/pci/intel/ipu6/ipu6-fw-isys.c
index a65e9f1aa1042..9f5bd9c4ddf91 100644
--- a/drivers/media/pci/intel/ipu6/ipu6-fw-isys.c
+++ b/drivers/media/pci/intel/ipu6/ipu6-fw-isys.c
@@ -218,7 +218,6 @@ static int ipu6_isys_fwcom_cfg_init(struct ipu6_isys *isys,
unsigned int max_send_queues, max_sram_blocks, max_devq_size;
struct ipu6_fw_syscom_queue_config *input_queue_cfg;
struct ipu6_fw_syscom_queue_config *output_queue_cfg;
- struct device *dev = &isys->adev->auxdev.dev;
int type_proxy = IPU6_FW_ISYS_QUEUE_TYPE_PROXY;
int type_dev = IPU6_FW_ISYS_QUEUE_TYPE_DEV;
int type_msg = IPU6_FW_ISYS_QUEUE_TYPE_MSG;
@@ -228,7 +227,6 @@ static int ipu6_isys_fwcom_cfg_init(struct ipu6_isys *isys,
struct ipu6_fw_isys_fw_config *isys_fw_cfg;
u32 num_in_message_queues;
unsigned int max_streams;
- unsigned int size;
unsigned int i;
max_streams = isys->pdata->ipdata->max_streams;
@@ -236,7 +234,7 @@ static int ipu6_isys_fwcom_cfg_init(struct ipu6_isys *isys,
max_sram_blocks = isys->pdata->ipdata->max_sram_blocks;
max_devq_size = isys->pdata->ipdata->max_devq_size;
num_in_message_queues = clamp(num_streams, 1U, max_streams);
- isys_fw_cfg = devm_kzalloc(dev, sizeof(*isys_fw_cfg), GFP_KERNEL);
+ isys_fw_cfg = kzalloc_obj(*isys_fw_cfg);
if (!isys_fw_cfg)
return -ENOMEM;
@@ -248,15 +246,14 @@ static int ipu6_isys_fwcom_cfg_init(struct ipu6_isys *isys,
isys_fw_cfg->num_recv_queues[type_dev] = 0;
isys_fw_cfg->num_recv_queues[type_msg] = 1;
- size = sizeof(*input_queue_cfg) * max_send_queues;
- input_queue_cfg = devm_kzalloc(dev, size, GFP_KERNEL);
+ input_queue_cfg = kzalloc_objs(*input_queue_cfg, max_send_queues);
if (!input_queue_cfg)
- return -ENOMEM;
+ goto err_free_fw_cfg;
- size = sizeof(*output_queue_cfg) * IPU6_N_MAX_RECV_QUEUES;
- output_queue_cfg = devm_kzalloc(dev, size, GFP_KERNEL);
+ output_queue_cfg = kzalloc_objs(*output_queue_cfg,
+ IPU6_N_MAX_RECV_QUEUES);
if (!output_queue_cfg)
- return -ENOMEM;
+ goto err_free_input_queue_cfg;
fwcom_cfg->input = input_queue_cfg;
fwcom_cfg->output = output_queue_cfg;
@@ -321,6 +318,20 @@ static int ipu6_isys_fwcom_cfg_init(struct ipu6_isys *isys,
fwcom_cfg->specific_size = sizeof(*isys_fw_cfg);
return 0;
+
+err_free_input_queue_cfg:
+ kfree(input_queue_cfg);
+err_free_fw_cfg:
+ kfree(isys_fw_cfg);
+
+ return -ENOMEM;
+}
+
+static void ipu6_isys_fwcom_cfg_free(struct ipu6_fw_com_cfg *fwcom_cfg)
+{
+ kfree(fwcom_cfg->specific_addr);
+ kfree(fwcom_cfg->output);
+ kfree(fwcom_cfg->input);
}
int ipu6_fw_isys_init(struct ipu6_isys *isys, unsigned int num_streams)
@@ -334,10 +345,13 @@ int ipu6_fw_isys_init(struct ipu6_isys *isys, unsigned int num_streams)
};
int ret;
- ipu6_isys_fwcom_cfg_init(isys, &fwcom_cfg, num_streams);
+ ret = ipu6_isys_fwcom_cfg_init(isys, &fwcom_cfg, num_streams);
+ if (ret)
+ return ret;
isys->fwctx = ipu6_fw_com_prepare(&fwcom_cfg, isys->adev,
isys->pdata->base);
+ ipu6_isys_fwcom_cfg_free(&fwcom_cfg);
if (!isys->fwctx) {
dev_err(dev, "isys fw com prepare failed\n");
return -EIO;
--
2.53.0
prev parent reply other threads:[~2026-11-11 17:21 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-07 10:03 FAILED: patch "[PATCH] media: ipu6: Fix firmware config leak on stream start" failed to apply to 7.3-stable tree Sasha Levin
2026-11-11 17:21 ` [PATCH 7.3.y 1/2] media: ipu6: Rename pointer to firmware context Sasha Levin
2026-11-11 17:21 ` Sasha Levin [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261111172105.3535158-2-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=devnexen@gmail.com \
--cc=sakari.ailus@linux.intel.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.