[PATCH] usb: typec: hd3ss3220: disable the interrupt before unregistering the port

[Myeonghun Pak <mhun512@gmail.com>]

The devm-managed IRQ remains active while hd3ss3220_remove() unregisters
the Type-C port and releases the role switch. A cable event during unbind
can make hd3ss3220_set_role() access either resource after release.

Disable and synchronize the IRQ before teardown, matching the existing
polling-work cancellation. The ID pin IRQ needs no change: its GPIO and
regulator are acquired before it, so devres releases that IRQ first.

Found by a static analysis tool under development.
Not tested on hardware.

Fixes: 1c48c759ef4b ("usb: typec: driver for TI HD3SS3220 USB Type-C DRP port controller")
Cc: stable@vger.kernel.org
Co-developed-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
---

 drivers/usb/typec/hd3ss3220.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/usb/typec/hd3ss3220.c b/drivers/usb/typec/hd3ss3220.c
index 60d6de9ba339..19c5dbdc97a1 100644
--- a/drivers/usb/typec/hd3ss3220.c
+++ b/drivers/usb/typec/hd3ss3220.c
@@ -554,6 +554,8 @@ static void hd3ss3220_remove(struct i2c_client *client)
 
 	if (hd3ss3220->poll)
 		cancel_delayed_work_sync(&hd3ss3220->output_poll_work);
+	else
+		disable_irq(client->irq);
 
 	typec_unregister_port(hd3ss3220->port);
 	usb_role_switch_put(hd3ss3220->role_sw);

base-commit: 630059a5a632377b9b7b487baccde92b7ae1dd47
-- 
2.43.0