From: Ho Jie Feng <hjf3108@gmail.com>
To: Ping-Ke Shih <pkshih@realtek.com>
Cc: linux-wireless@vger.kernel.org, linux-kernel@vger.kernel.org,
Bitterblue Smith <rtl8821cerfe2@gmail.com>,
Luka Gejak <luka.gejak@linux.dev>,
Ho Jie Feng <hjf3108@gmail.com>
Subject: [PATCH rtw-next v3 2/5] wifi: rtw88: 88xxa: receive VHT SU beamformed transmissions
Date: Fri, 13 Nov 2026 01:32:41 +0800 [thread overview]
Message-ID: <20261112173246.3201729-3-hjf3108@gmail.com> (raw)
In-Reply-To: <20261112173246.3201729-1-hjf3108@gmail.com>
Implement beamformee support for 88xxa since they have
support for it.
Signed-off-by: Ho Jie Feng <hjf3108@gmail.com>
---
drivers/net/wireless/realtek/rtw88/bf.h | 2 +
drivers/net/wireless/realtek/rtw88/main.c | 12 ++--
drivers/net/wireless/realtek/rtw88/reg.h | 1 +
drivers/net/wireless/realtek/rtw88/rtw8812a.c | 3 +-
drivers/net/wireless/realtek/rtw88/rtw8814a.c | 37 ++++++++++-
drivers/net/wireless/realtek/rtw88/rtw8821a.c | 3 +-
drivers/net/wireless/realtek/rtw88/rtw88xxa.c | 61 +++++++++++++++++++
drivers/net/wireless/realtek/rtw88/rtw88xxa.h | 2 +
8 files changed, 112 insertions(+), 9 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtw88/bf.h b/drivers/net/wireless/realtek/rtw88/bf.h
index a5d3010e6b..0aa78fb6a7 100644
--- a/drivers/net/wireless/realtek/rtw88/bf.h
+++ b/drivers/net/wireless/realtek/rtw88/bf.h
@@ -12,6 +12,8 @@
#define REG_ASSOCIATED_BFMER0_INFO 0x06E4
#define REG_ASSOCIATED_BFMER1_INFO 0x06EC
#define REG_TX_CSI_RPT_PARAM_BW20 0x06F4
+#define REG_TX_CSI_RPT_PARAM_BW40 0x06F8
+#define REG_TX_CSI_RPT_PARAM_BW80 0x06FC
#define REG_SND_PTCL_CTRL 0x0718
#define BIT_DIS_CHK_VHTSIGB_CRC BIT(6)
#define BIT_DIS_CHK_VHTSIGA_CRC BIT(5)
diff --git a/drivers/net/wireless/realtek/rtw88/main.c b/drivers/net/wireless/realtek/rtw88/main.c
index e243738809..fe93c93b1a 100644
--- a/drivers/net/wireless/realtek/rtw88/main.c
+++ b/drivers/net/wireless/realtek/rtw88/main.c
@@ -1603,6 +1603,7 @@ static void rtw_init_ht_cap(struct rtw_dev *rtwdev,
static void rtw_init_vht_cap(struct rtw_dev *rtwdev,
struct ieee80211_sta_vht_cap *vht_cap)
{
+ const struct rtw_chip_info *chip = rtwdev->chip;
struct rtw_efuse *efuse = &rtwdev->efuse;
u16 mcs_map = 0;
__le16 highest;
@@ -1621,10 +1622,13 @@ static void rtw_init_vht_cap(struct rtw_dev *rtwdev,
0;
if (rtwdev->hal.rf_path_num > 1)
vht_cap->cap |= IEEE80211_VHT_CAP_TXSTBC;
- vht_cap->cap |= IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE |
- IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE;
- vht_cap->cap |= (rtwdev->hal.bfee_sts_cap <<
- IEEE80211_VHT_CAP_BEAMFORMEE_STS_SHIFT);
+ if (rtw_bf_support && chip->bfer_su_max_num) {
+ vht_cap->cap |= IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE;
+ vht_cap->cap |= rtwdev->hal.bfee_sts_cap <<
+ IEEE80211_VHT_CAP_BEAMFORMEE_STS_SHIFT;
+ }
+ if (rtw_bf_support && chip->bfer_mu_max_num)
+ vht_cap->cap |= IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE;
if (rtw_chip_has_rx_ldpc(rtwdev))
vht_cap->cap |= IEEE80211_VHT_CAP_RXLDPC;
diff --git a/drivers/net/wireless/realtek/rtw88/reg.h b/drivers/net/wireless/realtek/rtw88/reg.h
index afcdb66fdb..f8ec1e2931 100644
--- a/drivers/net/wireless/realtek/rtw88/reg.h
+++ b/drivers/net/wireless/realtek/rtw88/reg.h
@@ -671,6 +671,7 @@
#define REG_IQK_COM96 0x0984
#define REG_FAS 0x09a4
+#define REG_CSI_CONTENT_VALUE 0x09b4
#define REG_RXSB 0x0a00
#define BIT_RXSB_ANA_DIV BIT(15)
#define REG_CCK_RX 0x0a04
diff --git a/drivers/net/wireless/realtek/rtw88/rtw8812a.c b/drivers/net/wireless/realtek/rtw88/rtw8812a.c
index 55f1d3d324..5d58dff4fc 100644
--- a/drivers/net/wireless/realtek/rtw88/rtw8812a.c
+++ b/drivers/net/wireless/realtek/rtw88/rtw8812a.c
@@ -931,7 +931,7 @@ static const struct rtw_chip_ops rtw8812a_ops = {
.phy_calibration = rtw8812a_phy_calibration,
.cck_pd_set = rtw_phy_cck_pd_set,
.pwr_track = rtw8812a_pwr_track,
- .config_bfee = NULL,
+ .config_bfee = rtw88xxa_bf_config_bfee,
.set_gid_table = NULL,
.cfg_csi_rate = NULL,
.led_set = rtw8812a_led_set,
@@ -1084,6 +1084,7 @@ const struct rtw_chip_info rtw8812a_hw_spec = {
.old_datarate_fb_limit = true,
.usb_tx_agg_desc_num = 1,
.iqk_threshold = 8,
+ .bfer_su_max_num = 2,
.ampdu_density = IEEE80211_HT_MPDU_DENSITY_16,
.max_scan_ie_len = IEEE80211_MAX_DATA_LEN,
diff --git a/drivers/net/wireless/realtek/rtw88/rtw8814a.c b/drivers/net/wireless/realtek/rtw88/rtw8814a.c
index e35c57c9d1..c2a18f6be8 100644
--- a/drivers/net/wireless/realtek/rtw88/rtw8814a.c
+++ b/drivers/net/wireless/realtek/rtw88/rtw8814a.c
@@ -4,6 +4,7 @@
#include <linux/usb.h>
#include "main.h"
+#include "bf.h"
#include "coex.h"
#include "tx.h"
#include "phy.h"
@@ -115,10 +116,13 @@ static void rtw8814a_init_hwcap(struct rtw_dev *rtwdev)
BIT(RTW_CHANNEL_WIDTH_80);
efuse->hw_cap.ptcl = EFUSE_HW_CAP_PTCL_VHT;
- if (hal->rf_type == RF_3T3R)
+ if (hal->rf_type == RF_3T3R) {
efuse->hw_cap.nss = 3;
- else
+ hal->bfee_sts_cap = 2;
+ } else {
efuse->hw_cap.nss = 2;
+ hal->bfee_sts_cap = 1;
+ }
rtw_dbg(rtwdev, RTW_DBG_EFUSE,
"hw cap: hci=0x%02x, bw=0x%02x, ptcl=0x%02x, ant_num=%d, nss=%d\n",
@@ -2039,6 +2043,32 @@ static void rtw8814a_led_set(struct led_classdev *led,
rtw_write32(rtwdev, REG_GPIO_PIN_CTRL_2, led_gpio_cfg);
}
+#define RTW_NDP_RX_STANDBY_TIME_8814A 0x40
+#define RTW_SND_CTRL_SOUNDING_8814A 0xDB
+
+static void rtw8814a_bf_enable_bfee_su(struct rtw_dev *rtwdev,
+ struct rtw_vif *vif,
+ struct rtw_bfee *bfee)
+{
+ rtw_bf_enable_bfee_su(rtwdev, vif, bfee);
+
+ rtw_write32_mask(rtwdev, REG_SND_PTCL_CTRL, MASKBYTE1 | MASKBYTE2,
+ 0x0202);
+ rtw_write8(rtwdev, REG_SND_PTCL_CTRL, RTW_SND_CTRL_SOUNDING_8814A);
+ rtw_write8(rtwdev, REG_SND_PTCL_CTRL + 3,
+ RTW_NDP_RX_STANDBY_TIME_8814A);
+}
+
+static void rtw8814a_bf_config_bfee(struct rtw_dev *rtwdev,
+ struct rtw_vif *vif,
+ struct rtw_bfee *bfee, bool enable)
+{
+ if (enable)
+ rtw8814a_bf_enable_bfee_su(rtwdev, vif, bfee);
+ else
+ rtw_bf_remove_bfee_su(rtwdev, bfee);
+}
+
static void rtw8814a_fill_txdesc_checksum(struct rtw_dev *rtwdev,
struct rtw_tx_pkt_info *pkt_info,
u8 *txdesc)
@@ -2068,7 +2098,7 @@ static const struct rtw_chip_ops rtw8814a_ops = {
.phy_calibration = rtw8814a_phy_calibration,
.cck_pd_set = rtw8814a_phy_cck_pd_set,
.pwr_track = rtw8814a_pwr_track,
- .config_bfee = NULL,
+ .config_bfee = rtw8814a_bf_config_bfee,
.set_gid_table = NULL,
.cfg_csi_rate = NULL,
.led_set = rtw8814a_led_set,
@@ -2231,6 +2261,7 @@ const struct rtw_chip_info rtw8814a_hw_spec = {
.rfe_defs = rtw8814a_rfe_defs,
.rfe_defs_size = ARRAY_SIZE(rtw8814a_rfe_defs),
.iqk_threshold = 8,
+ .bfer_su_max_num = 2,
.max_scan_ie_len = IEEE80211_MAX_DATA_LEN,
.coex_para_ver = 0,
diff --git a/drivers/net/wireless/realtek/rtw88/rtw8821a.c b/drivers/net/wireless/realtek/rtw88/rtw8821a.c
index 6096d3b8e4..6d106ae70d 100644
--- a/drivers/net/wireless/realtek/rtw88/rtw8821a.c
+++ b/drivers/net/wireless/realtek/rtw88/rtw8821a.c
@@ -877,7 +877,7 @@ static const struct rtw_chip_ops rtw8821a_ops = {
.phy_calibration = rtw8821a_phy_calibration,
.cck_pd_set = rtw_phy_cck_pd_set,
.pwr_track = rtw8821a_pwr_track,
- .config_bfee = NULL,
+ .config_bfee = rtw88xxa_bf_config_bfee,
.set_gid_table = NULL,
.cfg_csi_rate = NULL,
.led_set = rtw8821a_led_set,
@@ -1188,6 +1188,7 @@ const struct rtw_chip_info rtw8821a_hw_spec = {
.old_datarate_fb_limit = true,
.usb_tx_agg_desc_num = 6,
.iqk_threshold = 8,
+ .bfer_su_max_num = 2,
.ampdu_density = IEEE80211_HT_MPDU_DENSITY_16,
.max_scan_ie_len = IEEE80211_MAX_DATA_LEN,
diff --git a/drivers/net/wireless/realtek/rtw88/rtw88xxa.c b/drivers/net/wireless/realtek/rtw88/rtw88xxa.c
index 5ffa29d181..128a18ee33 100644
--- a/drivers/net/wireless/realtek/rtw88/rtw88xxa.c
+++ b/drivers/net/wireless/realtek/rtw88/rtw88xxa.c
@@ -138,6 +138,7 @@ static void rtw88xxa_read_usb_type(struct rtw_dev *rtwdev)
efuse->hw_cap.nss = 1;
else
efuse->hw_cap.nss = 2;
+ hal->bfee_sts_cap = 1;
if (rtwdev->chip->id == RTW_CHIP_TYPE_8821A)
goto print_hw_cap;
@@ -197,6 +198,66 @@ static void rtw88xxa_read_usb_type(struct rtw_dev *rtwdev)
efuse->hw_cap.ant_num, efuse->hw_cap.nss);
}
+#define RTW_NDP_RX_STANDBY_TIME_88XXA 0x50
+#define RTW_SND_CTRL_REMOVE_88XXA 0xC8
+#define RTW_SND_CTRL_SOUNDING_88XXA 0xCB
+
+void rtw88xxa_bf_config_bfee(struct rtw_dev *rtwdev, struct rtw_vif *vif,
+ struct rtw_bfee *bfee, bool enable)
+{
+ static const u32 csi_rpt_regs[] = {
+ REG_TX_CSI_RPT_PARAM_BW20,
+ REG_TX_CSI_RPT_PARAM_BW40,
+ REG_TX_CSI_RPT_PARAM_BW80,
+ };
+ struct rtw_bf_info *bf_info = &rtwdev->bf_info;
+ u8 slot = bfee->su_reg_index;
+ u32 addr_bfer_info;
+ u32 csi_param;
+ int i;
+
+ if (bfee->role != RTW_BFEE_SU || slot >= 2)
+ return;
+
+ addr_bfer_info = slot ? REG_ASSOCIATED_BFMER1_INFO :
+ REG_ASSOCIATED_BFMER0_INFO;
+
+ rtw_dbg(rtwdev, RTW_DBG_BF, "SU beamformee %s slot %u\n",
+ enable ? "enable" : "disable", slot);
+
+ if (!enable) {
+ rtw_write32(rtwdev, addr_bfer_info, 0);
+ rtw_write16(rtwdev, addr_bfer_info + 4, 0);
+
+ clear_bit(slot, bf_info->bfer_su_reg_maping);
+ bfee->su_reg_index = 0xff;
+
+ if (!bf_info->bfer_su_cnt)
+ rtw_write8(rtwdev, REG_SND_PTCL_CTRL,
+ RTW_SND_CTRL_REMOVE_88XXA);
+ return;
+ }
+
+ if (rtwdev->efuse.hw_cap.nss == 2) {
+ rtw_write32(rtwdev, REG_CSI_CONTENT_VALUE, 0);
+ csi_param = 0x01090109;
+ } else {
+ rtw_write32(rtwdev, REG_CSI_CONTENT_VALUE, 0x01081008);
+ csi_param = 0x01080108;
+ }
+
+ rtw_write8(rtwdev, REG_SND_PTCL_CTRL, RTW_SND_CTRL_SOUNDING_88XXA);
+ for (i = 0; i < ETH_ALEN; i++)
+ rtw_write8(rtwdev, addr_bfer_info + i, bfee->mac_addr[i]);
+
+ for (i = 0; i < ARRAY_SIZE(csi_rpt_regs); i++)
+ rtw_write32(rtwdev, csi_rpt_regs[i], csi_param);
+
+ rtw_write8(rtwdev, REG_SND_PTCL_CTRL + 3,
+ RTW_NDP_RX_STANDBY_TIME_88XXA);
+}
+EXPORT_SYMBOL(rtw88xxa_bf_config_bfee);
+
int rtw88xxa_read_efuse(struct rtw_dev *rtwdev, u8 *log_map, u8 *phy_map)
{
const struct rtw_chip_info *chip = rtwdev->chip;
diff --git a/drivers/net/wireless/realtek/rtw88/rtw88xxa.h b/drivers/net/wireless/realtek/rtw88/rtw88xxa.h
index 6597ca0dfc..150e86ea74 100644
--- a/drivers/net/wireless/realtek/rtw88/rtw88xxa.h
+++ b/drivers/net/wireless/realtek/rtw88/rtw88xxa.h
@@ -170,5 +170,7 @@ bool rtw88xxa_iqk_finish(int average, int threshold,
void rtw88xxa_phy_pwrtrack(struct rtw_dev *rtwdev,
void (*do_lck)(struct rtw_dev *rtwdev),
void (*do_iqk)(struct rtw_dev *rtwdev));
+void rtw88xxa_bf_config_bfee(struct rtw_dev *rtwdev, struct rtw_vif *vif,
+ struct rtw_bfee *bfee, bool enable);
#endif
--
2.53.0
next prev parent reply other threads:[~2026-11-12 17:33 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-12 17:32 [PATCH rtw-next v3 0/5] wifi: rtw88: extend 88xxA support Ho Jie Feng
2026-11-12 17:32 ` [PATCH rtw-next v3 1/5] wifi: rtw88: 8812a, 8814a: enable STBC for HT transmissions Ho Jie Feng
2026-11-13 8:08 ` Luka Gejak
2026-11-12 17:32 ` Ho Jie Feng [this message]
2026-11-13 7:46 ` [PATCH rtw-next v3 2/5] wifi: rtw88: 88xxa: receive VHT SU beamformed transmissions Luka Gejak
2026-11-13 8:01 ` Jie Feng
2026-11-13 8:07 ` Luka Gejak
2026-11-13 8:12 ` Jie Feng
2026-11-13 8:46 ` Luka Gejak
2026-11-13 8:09 ` Luka Gejak
2026-11-13 8:20 ` Jie Feng
2026-11-13 9:07 ` Luka Gejak
2026-11-12 17:32 ` [PATCH rtw-next v3 3/5] wifi: rtw88: prepare frequency-offset correction for more chips Ho Jie Feng
2026-11-12 17:32 ` [PATCH rtw-next v3 4/5] wifi: rtw88: 88xxa: correct carrier-frequency offset Ho Jie Feng
2026-11-13 7:52 ` Luka Gejak
2026-11-12 17:32 ` [PATCH rtw-next v3 5/5] wifi: rtw88: 8812a, 8821a: respect peer A-MPDU size limits Ho Jie Feng
2026-11-13 8:10 ` Luka Gejak
2026-11-13 8:16 ` Jie Feng
2026-11-13 8:39 ` Luka Gejak
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261112173246.3201729-3-hjf3108@gmail.com \
--to=hjf3108@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=luka.gejak@linux.dev \
--cc=pkshih@realtek.com \
--cc=rtl8821cerfe2@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.