Re: [PATCH v2 0/2] usb: onboard-hub: VL817 support for SpacemiT K1 boards

[Yixun Lan <dlan@kernel.org>]

Hi Hung-Chun,

On 11:16 Fri 13 Nov     , Hung-Chun Tseng wrote:
> The Milk-V Jupiter and the Banana Pi BPI-F3 put a VIA Labs VL817 hub in
> front of all their USB ports. Its supply and reset are GPIOs, so
> `usb start` only finds the root hub until someone powers the hub by
> hand.
> 
> This adds the VL817 to the onboard hub driver and enables it for K1.
> 
> Tested on a Milk-V Jupiter, cold boot from SD: `usb start` finds both
> VL817 hubs and a USB 3 stick at 5 Gb/s, with no manual GPIO setup.
> That test capped DRAM at 4 GiB to avoid the K1 DRAM sizing bug, which
> is now fixed in main by commit e6308cc14 ("spacemit: k1: drop the CS1
> DRAM map on single-rank boards").
> 
> Changes in v2:
> - Rebased on main.
> - Added Zixian's Tested-by to 1/2.
> 
> v1: <20261026092432.769146-1-alan.tseng.cs@gmail.com>
> 
> Hung-Chun Tseng (2):
>   usb: onboard-hub: Add support for VIA Labs VL817
>   configs: spacemit_k1: Enable onboard USB hub support
> 
>  common/usb_onboard_hub.c      | 14 +++++++++++++-
>  configs/spacemit_k1_defconfig |  1 +
>  2 files changed, 14 insertions(+), 1 deletion(-)

The series looks good, with
Reviewed-by: Yixun Lan <dlan@kernel.org>

-- 
Yixun Lan (dlan)