From: Andrew Morton <akpm@linux-foundation.org>
To: mm-commits@vger.kernel.org,lyugaofei@xiaomi.com,akpm@linux-foundation.org
Subject: [to-be-updated] mm-mglru-avoid-prolonged-anon-reclaim-with-swappiness=200.patch removed from -mm tree
Date: Fri, 13 Nov 2026 11:41:23 -0800 [thread overview]
Message-ID: <20261113194123.AA22D1F000C4@smtp.kernel.org> (raw)
The quilt patch titled
Subject: mm/mglru: avoid prolonged anon reclaim with swappiness=200
has been removed from the -mm tree. Its filename was
mm-mglru-avoid-prolonged-anon-reclaim-with-swappiness=200.patch
This patch was dropped because an updated version will be issued
------------------------------------------------------
From: Gaofei Lyu <lyugaofei@xiaomi.com>
Subject: mm/mglru: avoid prolonged anon reclaim with swappiness=200
Date: Thu, 12 Nov 2026 07:26:01 +0800
It has been observed that swappiness=200 can significantly slow down
reclaim on some machines, with some workloads running 3x slower
under MGLRU than under CLRU.
This is because swappiness=200 currently results in file_factor=0.
Give file reclaim a small factor at lower priorities, for example,
when sc->priority < DEF_PRIORITY / 2.
Link: https://lore.kernel.org/20261111232603.9934-15-baohua@kernel.org
Signed-off-by: Gaofei Lyu <lyugaofei@xiaomi.com>
Signed-off-by: Barry Song (Xiaomi) <baohua@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Co-developed-by: Barry Song (Xiaomi) <baohua@kernel.org>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Baoquan He <baoquan.he@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: <hui.zhu@linux.dev>
Cc: Kairui Song <kasong@tencent.com>
Cc: Kunwu Chan <kunwu.chan@gmail.com>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: wang lian <lianux.mm@gmail.com>
Cc: <liuxiang.277@bytedance.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Qi Zheng <qi.zheng@linux.dev>
Cc: Ridong Chen <ridong.chen@linux.dev>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: wangzicheng <wangzicheng@honor.com>
Cc: Wei Xu <weixugc@google.com>
Cc: Yuanchu Xie <yuanchu@google.com>
Cc: Bo Zhang <zhangbo56@xiaomi.com>
Cc: Hui Zhu <zhuhui@kylinos.cn>
Cc: Siddharth Chintamaneni <sidchintamaneni@gmail.com>
---
mm/vmscan.c | 15 ++++++++++-----
1 file changed, 10 insertions(+), 5 deletions(-)
--- a/mm/vmscan.c~mm-mglru-avoid-prolonged-anon-reclaim-with-swappiness=200
+++ a/mm/vmscan.c
@@ -4895,8 +4895,8 @@ static int get_tier_idx(struct lruvec *l
* We don't calculate the scan cost, MGLRU uses lazy promotion, which will
* cancel the scan budget natually.
*/
-static void lru_gen_balance_scan(struct lruvec *lruvec, int swappiness,
- unsigned long total_scan, unsigned long nr[])
+static void lru_gen_balance_scan(struct lruvec *lruvec, struct scan_control *sc,
+ int swappiness, unsigned long total_scan, unsigned long nr[])
{
struct lru_gen_folio *lrugen = &lruvec->lrugen;
u64 refault_rate[ANON_AND_FILE], anon_factor, file_factor;
@@ -4953,7 +4953,12 @@ static void lru_gen_balance_scan(struct
file_weight = nr[LRU_GEN_FILE] + nr[LRU_GEN_ANON] / size_bias;
anon_factor = (u64)swappiness * refault_rate[LRU_GEN_FILE] * anon_weight;
- file_factor = (u64)(MAX_SWAPPINESS - swappiness) * refault_rate[LRU_GEN_ANON] * file_weight;
+ if (swappiness == MAX_SWAPPINESS)
+ file_factor = sc->priority < DEF_PRIORITY / 2 ?
+ refault_rate[LRU_GEN_ANON] * file_weight : 0;
+ else
+ file_factor = (u64)(MAX_SWAPPINESS - swappiness) *
+ refault_rate[LRU_GEN_ANON] * file_weight;
/* Cross-multiply the ratio above. */
anon_scan = mul_u64_u64_div_u64(total_scan, anon_factor, anon_factor + file_factor);
@@ -5150,7 +5155,7 @@ static void lru_gen_prepare_scan(struct
total = apply_proportional_protection(memcg, sc, total);
total >>= sc->priority;
- lru_gen_balance_scan(lruvec, swappiness, total, nr_to_scan);
+ lru_gen_balance_scan(lruvec, sc, swappiness, total, nr_to_scan);
}
static bool should_abort_scan(struct lruvec *lruvec, struct scan_control *sc)
@@ -5897,7 +5902,7 @@ static int run_eviction(struct lruvec *l
return 0;
lruvec_evictable_size(lruvec, sc, swappiness, nr_to_scan);
- lru_gen_balance_scan(lruvec, swappiness,
+ lru_gen_balance_scan(lruvec, sc, swappiness,
nr_to_reclaim - sc->nr_reclaimed, nr_to_scan);
if (!evict_folio_lists(nr_to_scan, lruvec, sc, swappiness, MAX_LRU_BATCH))
_
Patches currently in -mm which might be from lyugaofei@xiaomi.com are
next reply other threads:[~2026-11-13 19:41 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-13 19:41 Andrew Morton [this message]
-- strict thread matches above, loose matches on Subject: below --
2026-11-14 21:59 [to-be-updated] mm-mglru-avoid-prolonged-anon-reclaim-with-swappiness=200.patch removed from -mm tree Andrew Morton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261113194123.AA22D1F000C4@smtp.kernel.org \
--to=akpm@linux-foundation.org \
--cc=lyugaofei@xiaomi.com \
--cc=mm-commits@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.