From: Matt Turner <mattst88@gmail.com>
To: Richard Henderson <richard.henderson@linaro.org>,
Magnus Lindholm <linmag7@gmail.com>,
Guenter Roeck <linux@roeck-us.net>
Cc: linux-alpha@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-hwmon@vger.kernel.org, linux-doc@vger.kernel.org,
Matt Turner <mattst88@gmail.com>
Subject: [PATCH 0/7] alpha: marvel: environmental sensors
Date: Sat, 14 Nov 2026 12:39:46 -0500 [thread overview]
Message-ID: <20261114-marvel-env-v1-0-890328e4b7e5@gmail.com> (raw)
The service processors of the Marvel AlphaServers (GS1280, ES80, ES47)
monitor temperatures, fans, voltages and power supplies. Linux can't read
these sensors, and the events the firmware raises when one changes state
are printed only with CONFIG_VERBOSE_MCHECK, and then decoded wrongly.
Patches 1 and 2 fix the event reporting. Patch 3 adds the SRM callback
that refreshes the readings of one config tree node, and patch 4
registers a platform device. Patch 5 is the hwmon driver, which polls.
Patches 6 and 7 make it reread the sensors and notify userspace when the
firmware reports an event.
The hwmon patches depend on the alpha ones, so I'd suggest the whole
series go through the alpha tree with an ack from Guenter.
Tested on an ES47, where sensors(1) shows the temperatures, fans,
voltages and power supply alarms. No environmental event fired during
testing, so patches 6 and 7 are only build tested.
Signed-off-by: Matt Turner <mattst88@gmail.com>
---
Matt Turner (7):
alpha: marvel: report environmental events without VERBOSE_MCHECK
alpha: marvel: fix the environmental subpacket layout
alpha: marvel: refresh environmental readings through the console
alpha: marvel: register a platform device for the environmental sensors
hwmon: Add driver for Marvel AlphaServer environmental sensors
alpha: marvel: notify environmental events
hwmon: (marvel-env) Notify userspace of environmental events
Documentation/hwmon/index.rst | 1 +
Documentation/hwmon/marvel-env.rst | 64 ++++
MAINTAINERS | 8 +
arch/alpha/include/asm/console.h | 2 +
arch/alpha/include/asm/err_ev7.h | 16 +-
arch/alpha/include/asm/marvel_env.h | 17 +
arch/alpha/include/uapi/asm/console.h | 2 +
arch/alpha/kernel/core_marvel.c | 59 ++++
arch/alpha/kernel/err_marvel.c | 39 ++-
arch/alpha/kernel/proto.h | 1 +
arch/alpha/kernel/srmcons.c | 3 +-
arch/alpha/lib/callback_srm.S | 1 +
drivers/hwmon/Kconfig | 12 +
drivers/hwmon/Makefile | 1 +
drivers/hwmon/marvel-env.c | 633 ++++++++++++++++++++++++++++++++++
15 files changed, 840 insertions(+), 19 deletions(-)
---
base-commit: 0b4cadbe7c39d830dec35c4a2655483de0dae568
change-id: 20261114-marvel-env-d0289c736ba3
Best regards,
--
Matt Turner <mattst88@gmail.com>
next reply other threads:[~2026-11-14 17:39 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-14 17:39 Matt Turner [this message]
2026-11-14 17:39 ` [PATCH 1/7] alpha: marvel: report environmental events without VERBOSE_MCHECK Matt Turner
2026-11-14 17:43 ` sashiko-bot
2026-11-14 17:39 ` [PATCH 2/7] alpha: marvel: fix the environmental subpacket layout Matt Turner
2026-11-14 17:44 ` sashiko-bot
2026-11-14 17:39 ` [PATCH 3/7] alpha: marvel: refresh environmental readings through the console Matt Turner
2026-11-14 17:47 ` sashiko-bot
2026-11-14 17:39 ` [PATCH 4/7] alpha: marvel: register a platform device for the environmental sensors Matt Turner
2026-11-14 17:44 ` sashiko-bot
2026-11-14 17:39 ` [PATCH 5/7] hwmon: Add driver for Marvel AlphaServer " Matt Turner
2026-11-14 17:57 ` sashiko-bot
2026-11-14 17:39 ` [PATCH 6/7] alpha: marvel: notify environmental events Matt Turner
2026-11-14 17:45 ` sashiko-bot
2026-11-14 17:39 ` [PATCH 7/7] hwmon: (marvel-env) Notify userspace of " Matt Turner
2026-11-14 17:52 ` sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261114-marvel-env-v1-0-890328e4b7e5@gmail.com \
--to=mattst88@gmail.com \
--cc=linmag7@gmail.com \
--cc=linux-alpha@vger.kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=richard.henderson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.