[PATCH v3 2/8] clk: sunxi-ng: de2: Export register regmap for DE33

[Jernej Skrabec <jernej.skrabec@gmail.com>]

The DE33 clock driver presets the plane mapping, which is not something
that a clock driver should do. Remove that and export the mapping
registers through a regmap instead, so the DRM driver can set them
properly.

Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
---
 drivers/clk/sunxi-ng/ccu-sun8i-de2.c | 43 ++++++++++++++++++++++++++--
 1 file changed, 40 insertions(+), 3 deletions(-)

diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-de2.c b/drivers/clk/sunxi-ng/ccu-sun8i-de2.c
index 6ec6c0dc4c26..f17570efafaa 100644
--- a/drivers/clk/sunxi-ng/ccu-sun8i-de2.c
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-de2.c
@@ -9,6 +9,7 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
+#include <linux/regmap.h>
 #include <linux/reset.h>
 
 #include "ccu_common.h"
@@ -283,6 +284,36 @@ static const struct sunxi_ccu_desc sun50i_h616_de33_clk_desc = {
 	.num_resets	= ARRAY_SIZE(sun50i_h616_de33_resets),
 };
 
+/*
+ * Add a regmap for the DE33 plane driver to access plane
+ * mapping registers.
+ * Only these registers are allowed to be written, to prevent
+ * overriding clock and reset configuration.
+ */
+
+#define SUN50I_DE33_CHN2CORE_REG 0x24
+#define SUN50I_DE33_PORT12CHN_REG 0x2c
+
+static const struct regmap_range sun8i_de2_ccu_regmap_accessible_ranges[] = {
+	regmap_reg_range(SUN50I_DE33_CHN2CORE_REG, SUN50I_DE33_PORT12CHN_REG),
+};
+
+static const struct regmap_access_table sun8i_de2_ccu_regmap_accessible_table = {
+	.yes_ranges = sun8i_de2_ccu_regmap_accessible_ranges,
+	.n_yes_ranges = ARRAY_SIZE(sun8i_de2_ccu_regmap_accessible_ranges),
+};
+
+static const struct regmap_config sun8i_de2_ccu_regmap_config = {
+	.reg_bits	= 32,
+	.val_bits	= 32,
+	.reg_stride	= 4,
+	.max_register	= SUN50I_DE33_PORT12CHN_REG,
+
+	/* other devices have no business accessing other registers */
+	.wr_table	= &sun8i_de2_ccu_regmap_accessible_table,
+	.rd_table	= &sun8i_de2_ccu_regmap_accessible_table,
+};
+
 static int sunxi_de2_clk_probe(struct platform_device *pdev)
 {
 	struct clk *bus_clk, *mod_clk;
@@ -336,13 +367,19 @@ static int sunxi_de2_clk_probe(struct platform_device *pdev)
 	}
 
 	/*
-	 * The DE33 requires these additional (unknown) registers set
+	 * The DE33 requires these additional plane mapping registers set
 	 * during initialisation.
 	 */
 	if (of_device_is_compatible(pdev->dev.of_node,
 				    "allwinner,sun50i-h616-de33-clk")) {
-		writel(0, reg + 0x24);
-		writel(0x0000a980, reg + 0x28);
+		struct regmap *regmap;
+
+		regmap = devm_regmap_init_mmio(&pdev->dev, reg,
+					       &sun8i_de2_ccu_regmap_config);
+		if (IS_ERR(regmap)) {
+			ret = PTR_ERR(regmap);
+			goto err_assert_reset;
+		}
 	}
 
 	ret = devm_sunxi_ccu_probe(&pdev->dev, reg, ccu_desc);
-- 
2.43.0