From: "Adil Hüsrev Tepe" <tadilhusrev@gmail.com>
To: Neil Armstrong <neil.armstrong@linaro.org>,
Jessica Zhang <jesszhan0024@gmail.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: "David Airlie" <airlied@gmail.com>,
"Simona Vetter" <simona@ffwll.ch>,
"Maarten Lankhorst" <maarten.lankhorst@linux.intel.com>,
"Maxime Ripard" <mripard@kernel.org>,
"Thomas Zimmermann" <tzimmermann@suse.de>,
dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
"Adil Hüsrev Tepe" <tadilhusrev@gmail.com>
Subject: [PATCH v1 0/2] drm/panel: add Novatek NT36525 (Samsung Galaxy XCover5)
Date: Mon, 16 Nov 2026 10:02:10 +0300 [thread overview]
Message-ID: <20261116070212.314228-1-tadilhusrev@gmail.com> (raw)
This series adds a DRM panel driver and its DT binding for MIPI-DSI
video-mode panels based on the Novatek NT36525 controller, as fitted on
the Samsung Galaxy XCover5 (SM-G525F, Exynos850). The panel is 720x1480,
uses an active-high reset (RESX), and a DCS init sequence that mirrors
the stock Samsung bring-up. Backlight goes through drm_panel_of_backlight().
Patch 1 dt-bindings (compatible: "samsung,xcover5-nt36525",
"novatek,nt36525")
Patch 2 the panel driver
Tested on a Samsung Galaxy XCover5 running 7.4-rc1 plus this series: the
panel initialises and displays correctly under phosh. checkpatch.pl and
dt_binding_check are clean (bar the usual new-file MAINTAINERS note; the
files are covered by the DRM PANEL DRIVERS wildcards).
Based on v7.4-rc1.
Tool usage
----------
This series was developed during XCover5 mainline bring-up with the help
of an AI coding assistant (Claude Code, Anthropic). The assistant converted
the vendor init stream to mipi_dsi_dcs_write_seq_multi(), drafted the driver
skeleton and the DT binding, and drafted these changelogs. I reviewed every
line, validated the binding (dt_binding_check, yamllint), tested the driver
on hardware, and take full responsibility for the contribution.
Prompt summary: "convert the XCover5 NT36525 vendor panel init into a
mainline drm_panel driver plus DT binding; keep it checkpatch- and
dt_binding_check-clean; test on the device." Review comments are welcome
and I will answer them myself.
Adil Hüsrev Tepe (2):
dt-bindings: display: panel: add Novatek NT36525
drm/panel: add Novatek NT36525 panel driver
.../display/panel/novatek,nt36525.yaml | 71 +++
drivers/gpu/drm/panel/Kconfig | 13 +
drivers/gpu/drm/panel/Makefile | 1 +
drivers/gpu/drm/panel/panel-novatek-nt36525.c | 486 ++++++++++++++++++
4 files changed, 571 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/novatek,nt36525.yaml
create mode 100644 drivers/gpu/drm/panel/panel-novatek-nt36525.c
--
2.53.0
next reply other threads:[~2026-11-16 7:02 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-16 7:02 Adil Hüsrev Tepe [this message]
2026-11-16 7:02 ` [PATCH v1 1/2] dt-bindings: display: panel: add Novatek NT36525 Adil Hüsrev Tepe
2026-11-16 7:14 ` sashiko-bot
2026-11-16 7:02 ` [PATCH v1 2/2] drm/panel: add Novatek NT36525 panel driver Adil Hüsrev Tepe
2026-11-16 7:22 ` sashiko-bot
2026-11-17 10:43 ` [PATCH v2 1/2] dt-bindings: display: panel: novatek,nt36525: fix v1 review issues Adil Hüsrev Tepe
2026-11-17 10:43 ` [PATCH v2 1/2] dt-bindings: display: panel: novatek, nt36525: " Adil Hüsrev Tepe
2026-11-17 10:43 ` [PATCH v2 2/2] drm/panel: novatek-nt36525: " Adil Hüsrev Tepe
2026-11-17 10:47 ` Krzysztof Kozlowski
2026-11-17 17:33 ` Adil Hüsrev Tepe
2026-11-17 17:33 ` [PATCH v3 0/2] drm/panel: add Novatek NT36525 (Samsung Galaxy XCover5) Adil Hüsrev Tepe
2026-11-17 17:33 ` [PATCH v3 1/2] dt-bindings: display: panel: add Novatek NT36525 Adil Hüsrev Tepe
2026-11-17 17:33 ` [PATCH v3 2/2] drm/panel: add Novatek NT36525 panel driver Adil Hüsrev Tepe
2026-11-18 7:48 ` Uwe Kleine-König
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261116070212.314228-1-tadilhusrev@gmail.com \
--to=tadilhusrev@gmail.com \
--cc=airlied@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=jesszhan0024@gmail.com \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=mripard@kernel.org \
--cc=neil.armstrong@linaro.org \
--cc=robh@kernel.org \
--cc=simona@ffwll.ch \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.