From: Jisheng Zhang <jszhang@kernel.org>
To: Andrew Lunn <andrew@lunn.ch>,
Heiner Kallweit <hkallweit1@gmail.com>,
Russell King <linux@armlinux.org.uk>,
"David S . Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
Maxime Chevallier <maxime.chevallier@bootlin.com>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: netdev@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/8] dt-bindings: net: Add Synaptics SL2610 DWMAC
Date: Mon, 16 Nov 2026 21:54:37 +0800 [thread overview]
Message-ID: <20261116135442.4827-4-jszhang@kernel.org> (raw)
In-Reply-To: <20261116135442.4827-1-jszhang@kernel.org>
Describe the Synaptics SL2610 integration of the Synopsys DWMAC 5.20.
The PHY interface mode is selected through a system-controller register,
identified by a syscon phandle and register offset.
Restrict PHY modes to the RMII and RGMII variants supported by the glue
and extend the common DWMAC compatible list for the new integration.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Assisted-by: LLM
---
.../devicetree/bindings/net/snps,dwmac.yaml | 1 +
.../bindings/net/syna,sl2610-dwmac.yaml | 75 +++++++++++++++++++
2 files changed, 76 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/syna,sl2610-dwmac.yaml
diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
index 2c4842404bf6..267340a5f45c 100644
--- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
@@ -119,6 +119,7 @@ properties:
- sophgo,sg2044-dwmac
- starfive,jh7100-dwmac
- starfive,jh7110-dwmac
+ - syna,sl2610-dwmac
- tesla,fsd-ethqos
- thead,th1520-gmac
- ultrarisc,dp1000-gmac
diff --git a/Documentation/devicetree/bindings/net/syna,sl2610-dwmac.yaml b/Documentation/devicetree/bindings/net/syna,sl2610-dwmac.yaml
new file mode 100644
index 000000000000..0748b623599b
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/syna,sl2610-dwmac.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/syna,sl2610-dwmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synaptics SL2610 DesignWare Ethernet MAC
+
+maintainers:
+ - Jisheng Zhang <jszhang@kernel.org>
+
+select:
+ properties:
+ compatible:
+ contains:
+ const: syna,sl2610-dwmac
+ required:
+ - compatible
+
+allOf:
+ - $ref: snps,dwmac.yaml#
+
+properties:
+ compatible:
+ items:
+ - const: syna,sl2610-dwmac
+ - const: snps,dwmac-5.20
+
+ syna,syscon:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ items:
+ - items:
+ - description: Phandle to the SL2610 system controller.
+ - description: Offset of the Ethernet interface control register.
+ description:
+ Phandle and register offset used to configure the Ethernet PHY
+ interface mode.
+
+ phy-mode:
+ enum:
+ - rmii
+ - rgmii
+ - rgmii-id
+ - rgmii-rxid
+ - rgmii-txid
+
+required:
+ - compatible
+ - syna,syscon
+ - phy-mode
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ chip: syscon@f7e10000 {
+ compatible = "syna,sl2610-soc-syscon", "syscon";
+ reg = <0xf7e10000 0x10000>;
+ clocks = <&osc>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+
+ ethernet@f7a06000 {
+ compatible = "syna,sl2610-dwmac", "snps,dwmac-5.20";
+ reg = <0xf7a06000 0x2000>;
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ phy-mode = "rgmii-id";
+ syna,syscon = <&chip 0xa3c>;
+ };
+...
--
2.55.0
next prev parent reply other threads:[~2026-11-16 14:15 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-16 13:54 [PATCH 0/8] net: stmmac: add SL2610 ethernet support Jisheng Zhang
2026-11-16 13:54 ` [PATCH 1/8] dt-bindings: net: Add MDIO demultiplexer Jisheng Zhang
2026-11-16 15:06 ` Andrew Lunn
2026-11-17 5:06 ` Jisheng Zhang
2026-11-17 13:24 ` Andrew Lunn
2026-11-17 14:13 ` Jisheng Zhang
2026-11-17 14:59 ` Andrew Lunn
2026-11-17 15:55 ` Jisheng Zhang
2026-11-17 16:20 ` Andrew Lunn
2026-11-17 16:18 ` Jisheng Zhang
2026-11-17 17:02 ` Andrew Lunn
2026-11-16 13:54 ` [PATCH 2/8] net: mdio: Add MDIO demultiplexer driver Jisheng Zhang
2026-11-16 13:54 ` Jisheng Zhang [this message]
2026-11-16 13:54 ` [PATCH 4/8] net: stmmac: Add glue layer for Synaptics SL2610 SoC Jisheng Zhang
2026-11-16 13:54 ` [PATCH 5/8] dt-bindings: soc: synaptics: Allow SL2610 mux controller children Jisheng Zhang
2026-11-16 13:54 ` [PATCH 6/8] soc: synaptics: Populate SL2610 system controller DT children Jisheng Zhang
2026-11-16 13:54 ` [PATCH 7/8] arm64: dts: synaptics: Add SL2610 Ethernet nodes Jisheng Zhang
2026-11-16 13:54 ` [PATCH 8/8] arm64: dts: synaptics: Enable Ethernet on SL2619 RDK Jisheng Zhang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261116135442.4827-4-jszhang@kernel.org \
--to=jszhang@kernel.org \
--cc=alexandre.torgue@foss.st.com \
--cc=andrew@lunn.ch \
--cc=conor+dt@kernel.org \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=edumazet@google.com \
--cc=hkallweit1@gmail.com \
--cc=krzk+dt@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=maxime.chevallier@bootlin.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=robh@kernel.org \
--cc=sebastian.hesselbarth@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.