All of lore.kernel.org
 help / color / mirror / Atom feed
From: Vitor Soares <ivitro@gmail.com>
To: Nishanth Menon <nm@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>,
	Tero Kristo <kristo@kernel.org>, Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>
Cc: Vitor Soares <vitor.soares@toradex.com>,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH 2/2] arm64: dts: ti: k3-am69-aquila: Add ath12k calibration variant
Date: Tue, 17 Nov 2026 17:41:56 +0000	[thread overview]
Message-ID: <20261117174154.549590-6-ivitro@gmail.com> (raw)
In-Reply-To: <20261117174154.549590-4-ivitro@gmail.com>

From: Vitor Soares <vitor.soares@toradex.com>

The Aquila AM69 has a Silex SX-PCEBE Wi-Fi module (WCN7850). The
module reports the same PCI and QMI IDs as other WCN7850 designs,
and its board data also comes in variants for different regulatory
domains (US/EU/JP, UK/CA low and high). The IDs alone therefore
cannot identify the right board data.

Describe the Wi-Fi device behind the PCIE3 root port and set
qcom,calibration-variant to the US/EU/JP board data.

Signed-off-by: Vitor Soares <vitor.soares@toradex.com>
---
 arch/arm64/boot/dts/ti/k3-am69-aquila.dtsi | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am69-aquila.dtsi b/arch/arm64/boot/dts/ti/k3-am69-aquila.dtsi
index b6854acee8fe..62904e9bcc71 100644
--- a/arch/arm64/boot/dts/ti/k3-am69-aquila.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am69-aquila.dtsi
@@ -1393,6 +1393,21 @@ &pcie3_rc {
 	reset-gpios = <&som_gpio_expander 4 GPIO_ACTIVE_HIGH>;
 	ti,syscon-acspcie-proxy-ctrl = <&acspcie0_proxy_ctrl 0x3>;
 	status = "okay";
+
+	pci@0,0 {
+		device_type = "pci";
+		compatible = "pciclass,0604";
+		reg = <0x0 0x0 0x0 0x0 0x0>;
+		ranges;
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		wifi@0 {
+			compatible = "pci17cb,1107";
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			qcom,calibration-variant = "Silex_SX-PCEBE_US_EU_JP";
+		};
+	};
 };
 
 &serdes0 {
-- 
2.53.0


      parent reply	other threads:[~2026-11-17 17:42 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-17 17:41 [PATCH 0/2] Add ath12k calibration variant for Silex SX-PCEBE on Aquila AM69 Vitor Soares
2026-11-17 17:41 ` [PATCH 1/2] dt-bindings: wireless: ath12k: Make WCN7850 supplies optional Vitor Soares
2026-11-17 17:41 ` Vitor Soares [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261117174154.549590-6-ivitro@gmail.com \
    --to=ivitro@gmail.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=kristo@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nm@ti.com \
    --cc=robh@kernel.org \
    --cc=vigneshr@ti.com \
    --cc=vitor.soares@toradex.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.