From: Cheng Xu <chengyou@linux.alibaba.com>
To: stable@vger.kernel.org
Cc: leon@kernel.org, jgg@ziepe.ca, kaishen@linux.alibaba.com,
linux-rdma@vger.kernel.org
Subject: [PATCH 6.1.y] RDMA/erdma: Use IRQ-safe XArray helpers for QP and CQ tables
Date: Wed, 18 Nov 2026 11:28:58 +0800 [thread overview]
Message-ID: <20261118032858.92963-1-chengyou@linux.alibaba.com> (raw)
[ Upstream commit 00baeade709fb66da647e8327e8398bb532e30f7 ]
Locked QP and CQ lookups from EQ interrupts can deadlock with
create-path XArray updates. If an interrupt arrives while the create
path holds the plain xa_lock, the lookup spins forever trying to
acquire the same lock.
Use IRQ-safe XArray helpers for all QP and CQ create-path updates,
including the GSI QP store and error paths. Initialize both arrays with
XA_FLAGS_LOCK_IRQ so sleeping allocations preserve interrupt state.
[ The GSI QP create path is not present in 6.1.y, so omit that hunk. ]
Fixes: 98df2aee1459 ("RDMA/erdma: Hold CQ references when processing EQ events")
Fixes: a52eeff32024 ("RDMA/erdma: Hold QP references for AE and CM processing")
Signed-off-by: Cheng Xu <chengyou@linux.alibaba.com>
Link: https://patch.msgid.link/20260828030344.88021-1-chengyou@linux.alibaba.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
---
drivers/infiniband/hw/erdma/erdma_main.c | 4 ++--
drivers/infiniband/hw/erdma/erdma_verbs.c | 16 ++++++++--------
2 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/drivers/infiniband/hw/erdma/erdma_main.c b/drivers/infiniband/hw/erdma/erdma_main.c
index 49d931921741..ca93686b0378 100644
--- a/drivers/infiniband/hw/erdma/erdma_main.c
+++ b/drivers/infiniband/hw/erdma/erdma_main.c
@@ -500,8 +500,8 @@ static int erdma_ib_device_add(struct pci_dev *pdev)
INIT_LIST_HEAD(&dev->cep_list);
spin_lock_init(&dev->lock);
- xa_init_flags(&dev->qp_xa, XA_FLAGS_ALLOC1);
- xa_init_flags(&dev->cq_xa, XA_FLAGS_ALLOC1);
+ xa_init_flags(&dev->qp_xa, XA_FLAGS_ALLOC1 | XA_FLAGS_LOCK_IRQ);
+ xa_init_flags(&dev->cq_xa, XA_FLAGS_ALLOC1 | XA_FLAGS_LOCK_IRQ);
dev->next_alloc_cqn = 1;
dev->next_alloc_qpn = 1;
diff --git a/drivers/infiniband/hw/erdma/erdma_verbs.c b/drivers/infiniband/hw/erdma/erdma_verbs.c
index 2ddc56335b9a..b848828287d1 100644
--- a/drivers/infiniband/hw/erdma/erdma_verbs.c
+++ b/drivers/infiniband/hw/erdma/erdma_verbs.c
@@ -693,9 +693,9 @@ int erdma_create_qp(struct ib_qp *ibqp, struct ib_qp_init_attr *attrs,
kref_init(&qp->ref);
init_completion(&qp->safe_free);
- ret = xa_alloc_cyclic(&dev->qp_xa, &qp->ibqp.qp_num, qp,
- XA_LIMIT(1, dev->attrs.max_qp - 1),
- &dev->next_alloc_qpn, GFP_KERNEL);
+ ret = xa_alloc_cyclic_irq(&dev->qp_xa, &qp->ibqp.qp_num, qp,
+ XA_LIMIT(1, dev->attrs.max_qp - 1),
+ &dev->next_alloc_qpn, GFP_KERNEL);
if (ret < 0) {
ret = -ENOMEM;
goto err_out;
@@ -750,7 +750,7 @@ int erdma_create_qp(struct ib_qp *ibqp, struct ib_qp_init_attr *attrs,
else
free_kernel_qp(qp);
err_out_xa:
- xa_erase(&dev->qp_xa, QP_ID(qp));
+ xa_erase_irq(&dev->qp_xa, QP_ID(qp));
err_out:
return ret;
}
@@ -1433,9 +1433,9 @@ int erdma_create_cq(struct ib_cq *ibcq, const struct ib_cq_init_attr *attr,
refcount_set(&cq->refcount, 1);
init_completion(&cq->free);
- ret = xa_alloc_cyclic(&dev->cq_xa, &cq->cqn, cq,
- XA_LIMIT(1, dev->attrs.max_cq - 1),
- &dev->next_alloc_cqn, GFP_KERNEL);
+ ret = xa_alloc_cyclic_irq(&dev->cq_xa, &cq->cqn, cq,
+ XA_LIMIT(1, dev->attrs.max_cq - 1),
+ &dev->next_alloc_cqn, GFP_KERNEL);
if (ret < 0)
return ret;
@@ -1482,7 +1482,7 @@ int erdma_create_cq(struct ib_cq *ibcq, const struct ib_cq_init_attr *attr,
}
err_out_xa:
- xa_erase(&dev->cq_xa, cq->cqn);
+ xa_erase_irq(&dev->cq_xa, cq->cqn);
return ret;
}
--
2.31.1
next reply other threads:[~2026-11-18 3:29 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-18 3:28 Cheng Xu [this message]
2026-11-18 3:35 ` [PATCH 6.1.y] RDMA/erdma: Use IRQ-safe XArray helpers for QP and CQ tables sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261118032858.92963-1-chengyou@linux.alibaba.com \
--to=chengyou@linux.alibaba.com \
--cc=jgg@ziepe.ca \
--cc=kaishen@linux.alibaba.com \
--cc=leon@kernel.org \
--cc=linux-rdma@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.