From: Zhefu Peng <ilskdw@gmail.com>
To: netdev@vger.kernel.org
Cc: andrew+netdev@lunn.ch, davem@davemloft.net, edumazet@kernel.org,
kuba@kernel.org, pabeni@redhat.com, horms@kernel.org,
kuniyu@google.com, mschiffer@universe-factory.net,
nicolas.dichtel@6wind.com, shuah@kernel.org,
linux-kselftest@vger.kernel.org
Subject: [PATCH net v6 0/2] vxlan: reset the remote's dst cache when snooping moves a MAC
Date: Thu, 19 Nov 2026 17:52:54 +0800 [thread overview]
Message-ID: <20261119095256.42005-1-ilskdw@gmail.com> (raw)
When a learning VXLAN device snoops a known MAC from another VTEP, it
rewrites the remote's IP address in place but keeps the remote's
dst_cache and remote_ifindex. Traffic to the moved MAC can then use the
route cached for the previous remote and be blackholed. Patch 1 updates
the remote the way vxlan_fdb_replace() does, under vxlan->hash_lock,
and compares remote_ifindex in the early return only for link-local
sources, so a "via" device set on a dynamic entry is kept. Patch 2 adds
a selftest.
Results on net with 1, 2 and 4 CPUs, per selftest case (move behind a
router, move to link-local, via kept):
- without patch 1: 0/7, 0/7, 7/7
- with v5 of patch 1: 7/7, 7/7, 7/7
- with this version: 14/14, 14/14, 14/14
- with this version and CONFIG_PROVE_LOCKING: 7/7 for each case, no
lockdep splats
v6:
- update the remote under vxlan->hash_lock and check the entry again
once the lock is held, so concurrent snoops cannot mix remote_ip and
remote_ifindex (Sashiko)
- selftest: pin pings to an allowed CPU instead of CPU 0, skip when
setup_ns fails, and drop the CPU pinning from the IPv6 case, which
does not test the route cache (Sashiko)
v5: https://lore.kernel.org/netdev/20261115040609.61134-1-ilskdw@gmail.com/
- compare remote_ifindex in the early return only for link-local
sources, so traffic from the same remote no longer resets a "via"
device to 0 (Sashiko)
- selftest: add a case for the above and keep lines within 80 columns
v4: https://lore.kernel.org/netdev/20261113155133.75090-1-ilskdw@gmail.com/
- add the selftest (Nicolas Dichtel)
v3: https://lore.kernel.org/netdev/20261111180001.2475-1-ilskdw@gmail.com/
- use my real name in From: and Signed-off-by:
v2: https://lore.kernel.org/netdev/20261110153020.9635-1-ilskdw@gmail.com/
- also update remote_ifindex and clear offloaded, as vxlan_fdb_replace() does
- add the IPv6 link-local case to the changelog and a second Fixes tag
v1: https://lore.kernel.org/netdev/20261106144406.66035-1-ilskdw@gmail.com/
Zhefu Peng (2):
vxlan: reset the remote's dst cache when snooping moves a MAC
selftests: net: add a test for vxlan snooping moving a MAC
drivers/net/vxlan/vxlan_core.c | 59 ++++-
tools/testing/selftests/net/Makefile | 1 +
.../selftests/net/test_vxlan_snoop_move.sh | 222 ++++++++++++++++++
3 files changed, 274 insertions(+), 8 deletions(-)
create mode 100755 tools/testing/selftests/net/test_vxlan_snoop_move.sh
--
2.54.0
next reply other threads:[~2026-11-19 9:53 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-19 9:52 Zhefu Peng [this message]
2026-11-19 9:52 ` [PATCH net v6 1/2] vxlan: reset the remote's dst cache when snooping moves a MAC Zhefu Peng
2026-11-19 9:52 ` [PATCH net v6 2/2] selftests: net: add a test for vxlan snooping moving " Zhefu Peng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261119095256.42005-1-ilskdw@gmail.com \
--to=ilskdw@gmail.com \
--cc=andrew+netdev@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@kernel.org \
--cc=horms@kernel.org \
--cc=kuba@kernel.org \
--cc=kuniyu@google.com \
--cc=linux-kselftest@vger.kernel.org \
--cc=mschiffer@universe-factory.net \
--cc=netdev@vger.kernel.org \
--cc=nicolas.dichtel@6wind.com \
--cc=pabeni@redhat.com \
--cc=shuah@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.