From: Helge Deller <deller@kernel.org>
To: qemu-devel@nongnu.org
Cc: Richard Henderson <richard.henderson@linaro.org>,
Paolo Bonzini <pbonzini@redhat.com>, Helge Deller <deller@gmx.de>,
Fam Zheng <fam@euphon.net>, BALATON Zoltan <balaton@eik.bme.hu>,
Keith Monahan <keith@techtravels.org>
Subject: [PATCH v3 3/6] hw/scsi/lasi_ncr710: map the full LASI SCSI module page
Date: Fri, 20 Nov 2026 00:32:32 +0100 [thread overview]
Message-ID: <20261119233235.32808-4-deller@kernel.org> (raw)
In-Reply-To: <20261119233235.32808-1-deller@kernel.org>
From: Keith Monahan <keith@techtravels.org>
0x100..0x1ff goes to the chip core as before. The rest of the module
page reads as 0: HP-UX reads a board strap at 0xd85 (bit 0x20:
differential bus, 25 MHz clock); 0 is single ended, 50 MHz.
0x10..0xff and 0x200..0xfff are unmapped module space. Writes to all
of them are ignored.
Signed-off-by: Keith Monahan <keith@techtravels.org>
Signed-off-by: Helge Deller <deller@gmx.de>
---
hw/scsi/lasi_ncr710.c | 21 ++++++++++++++-------
1 file changed, 14 insertions(+), 7 deletions(-)
diff --git a/hw/scsi/lasi_ncr710.c b/hw/scsi/lasi_ncr710.c
index bca2695104..5e0294e7a7 100644
--- a/hw/scsi/lasi_ncr710.c
+++ b/hw/scsi/lasi_ncr710.c
@@ -45,7 +45,13 @@ static uint64_t lasi_ncr710_reg_read(void *opaque, hwaddr addr,
return val;
}
- if (addr >= 0x100) {
+ /*
+ * 0x100..0x1ff goes to the chip core as before. The rest of the
+ * module page reads as 0: HP-UX reads a board strap at 0xd85
+ * (bit 0x20: differential bus, 25 MHz clock); 0 is single ended,
+ * 50 MHz.
+ */
+ if (addr >= 0x100 && addr + size <= 0x200) {
hwaddr ncr_addr = addr - 0x100;
if (size == 1) {
/*
@@ -82,16 +88,17 @@ static void lasi_ncr710_reg_write(void *opaque, hwaddr addr,
trace_lasi_ncr710_reg_write(addr, val, size);
/*
- * 0x00..0x0f is the read only LASI module header (ID/SVERSION/HVERSION) and
- * 0x10..0xff is unmapped module space; writes to both are ignored. The
- * SCSI bus reset is driven through the chip's SCNTL1.RST at forwarded
- * offset 0x101 (see ncr53c710.c), not through this window.
+ * 0x00..0x0f is the read only LASI module header (ID/SVERSION/HVERSION);
+ * 0x10..0xff and 0x200..0xfff are unmapped module space. Writes to all
+ * of them are ignored. The SCSI bus reset is driven through the chip's
+ * SCNTL1.RST at forwarded offset 0x101 (see ncr53c710.c), not through
+ * this window.
*/
if (addr <= 0x0f) {
return;
}
- if (addr >= 0x100) {
+ if (addr >= 0x100 && addr + size <= 0x200) {
hwaddr ncr_addr = addr - 0x100;
if (size == 1) {
@@ -190,7 +197,7 @@ static void lasi_ncr710_realize(DeviceState *dev, Error **errp)
(uint64_t)s->ncr710.scripts_timer);
memory_region_init_io(&s->mmio, OBJECT(dev), &lasi_ncr710_mmio_ops, s,
- "lasi-ncr710", 0x200);
+ "lasi-ncr710", 0x1000);
sysbus_init_mmio(sbd, &s->mmio);
}
--
2.54.0
next prev parent reply other threads:[~2026-11-19 23:33 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-19 23:32 [PATCH v3 0/6] nc53c710 rewrite Helge Deller
2026-11-19 23:32 ` [PATCH v3 1/6] hw/scsi/ncr53c710: rewrite the 53C710 SCRIPTS engine Helge Deller
2026-11-19 23:32 ` [PATCH v3 2/6] hw/scsi: share NCR/LSI definitions in lsi_scsi.h Helge Deller
2026-11-20 0:58 ` BALATON Zoltan
2026-11-20 8:43 ` Helge Deller
2026-11-20 10:37 ` BALATON Zoltan
2026-11-19 23:32 ` Helge Deller [this message]
2026-11-19 23:32 ` [PATCH v3 4/6] hw/scsi/ncr53c710: move to COMMAND on CLEAR ACK after MESSAGE REJECT Helge Deller
2026-11-19 23:32 ` [PATCH v3 5/6] hw/scsi/scsi-disk: add quirk_mode_page_no_flexible_disk, use it on the 715 Helge Deller
2026-11-19 23:32 ` [PATCH v3 6/6] hw/scsi/ncr53c710: Comment cleanup, reduce verbosity, repetition Helge Deller
2026-11-19 23:39 ` [PATCH v3 0/6] nc53c710 rewrite Philippe Mathieu-Daudé
2026-11-20 8:25 ` Helge Deller
2026-11-20 9:59 ` Mark Cave-Ayland
2026-11-20 16:34 ` Philippe Mathieu-Daudé
2026-11-20 16:43 ` Mark Cave-Ayland
2026-11-20 17:18 ` Philippe Mathieu-Daudé
2026-11-20 1:12 ` BALATON Zoltan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261119233235.32808-4-deller@kernel.org \
--to=deller@kernel.org \
--cc=balaton@eik.bme.hu \
--cc=deller@gmx.de \
--cc=fam@euphon.net \
--cc=keith@techtravels.org \
--cc=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=richard.henderson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.