All of lore.kernel.org
 help / color / mirror / Atom feed
From: Gianluca Boiano <morf3089@gmail.com>
To: Mark Brown <broonie@kernel.org>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>
Cc: Gianluca Boiano <morf3089@gmail.com>,
	Shenghao Ding <shenghao-ding@ti.com>, Kevin Lu <kevin-lu@ti.com>,
	Baojun Xu <baojun.xu@ti.com>, "Wang, Sen" <sen@ti.com>,
	Markus Elfring <Markus.Elfring@web.de>,
	linux-sound@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v4 0/2] ASoC: codecs: add Texas Instruments TAS2557 smart amplifier driver
Date: Fri, 20 Nov 2026 01:43:22 +0100	[thread overview]
Message-ID: <20261120004414.1686884-1-morf3089@gmail.com> (raw)

The TAS2557 is a mono Class-D smart amplifier with an on-chip DSP for
speaker protection, controlled over I2C, with audio over I2S/TDM. The
DSP needs a firmware image tuned for the speaker; without it the chip
passes no audio.

Patch 1 adds the binding, patch 2 the driver. One node describes one
chip or a stereo pair on one bus, using the reg-array convention of
ti,tas2781.yaml: reg index 0 is DEV_A, index 1 is DEV_B.

v4 uses tas2781-comlib for register access, adds the firmware rate
constraint asked for in the v2 review, and addresses the v3 review
from Mark Brown, Krzysztof Kozlowski and Markus Elfring. The
ti,imon-slot-nos/ti,vmon-slot-nos properties are gone: the register
they were written to only holds the I-sense scale. I/V sense now stays
on while the amplifier plays, as in TI's driver. Details are in the
per-patch changelogs.

Testing: built against broonie/sound for-next with W=1, checkpatch
--strict and dt_binding_check clean. The v4 driver was run in mono on
a Xiaomi Redmi Note 6 Pro (SDM636, ASI2) on a 7.2-based kernel:
firmware load, playback, stream restarts without a program reload and
unbind/bind. Stereo pairs, TDM, DSP_A, ASI1 and suspend were not
tested with v4.

Link to v3: https://lore.kernel.org/linux-sound/20260717233402.414326-1-morf3089@gmail.com/
Link to v2: https://lore.kernel.org/linux-sound/20260711145722.188556-1-morf3089@gmail.com/
Link to v1: https://lore.kernel.org/linux-sound/20260709221331.989109-1-morf3089@gmail.com/

Gianluca Boiano (2):
  ASoC: dt-bindings: add Texas Instruments TAS2557
  ASoC: codecs: add TAS2557 mono smart amplifier driver

 .../devicetree/bindings/sound/ti,tas2557.yaml |  158 +
 MAINTAINERS                                   |    1 +
 sound/soc/codecs/Kconfig                      |   13 +
 sound/soc/codecs/Makefile                     |    2 +
 sound/soc/codecs/tas2557.c                    | 2973 +++++++++++++++++
 sound/soc/codecs/tas2557.h                    |  207 ++
 6 files changed, 3354 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/sound/ti,tas2557.yaml
 create mode 100644 sound/soc/codecs/tas2557.c
 create mode 100644 sound/soc/codecs/tas2557.h


base-commit: cee03387d20bb267663085d9ac2622ff9263d302
-- 
2.56.1


             reply	other threads:[~2026-11-20  0:44 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-20  0:43 Gianluca Boiano [this message]
2026-11-20  0:43 ` [PATCH v4 1/2] ASoC: dt-bindings: add Texas Instruments TAS2557 Gianluca Boiano
2026-11-20  0:43 ` [PATCH v4 2/2] ASoC: codecs: add TAS2557 mono smart amplifier driver Gianluca Boiano
2026-11-20  1:02   ` sashiko-bot
2026-11-20 15:14 ` [PATCH v4 0/2] ASoC: codecs: add Texas Instruments TAS2557 " David Heidelberg

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261120004414.1686884-1-morf3089@gmail.com \
    --to=morf3089@gmail.com \
    --cc=Markus.Elfring@web.de \
    --cc=baojun.xu@ti.com \
    --cc=broonie@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=kevin-lu@ti.com \
    --cc=krzk+dt@kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sound@vger.kernel.org \
    --cc=perex@perex.cz \
    --cc=robh@kernel.org \
    --cc=sen@ti.com \
    --cc=shenghao-ding@ti.com \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.