All of lore.kernel.org
 help / color / mirror / Atom feed
From: Zheng Shuhao <viennaoffh@gmail.com>
To: linux-input@vger.kernel.org
Cc: jikos@kernel.org, jic23@kernel.org,
	srinivas.pandruvada@linux.intel.com, bentiss@kernel.org,
	heiko@sntech.de, lee@kernel.org, linux-iio@vger.kernel.org,
	linux-kernel@vger.kernel.org, ayaanmirzabaig85@gmail.com,
	syzbot+fb951970a334aaff00ba@syzkaller.appspotmail.com
Subject: [PATCH v2] HID: sensor-hub: Avoid holding spinlock across child iteration
Date: Fri, 20 Nov 2026 21:50:05 +0800	[thread overview]
Message-ID: <20261120135005.566-1-viennaoffh@gmail.com> (raw)
In-Reply-To: <1795161418.hid-sensor-hub@viennaoffh.gmail.com>

sensor_hub_remove() holds sensor_data->lock while walking the HID device's
children with device_for_each_child(). The child iteration takes the device
core's klist lock, while sensor_hub_raw_event() takes
sensor_data->lock with interrupts disabled. This creates a lock-order
inversion.

Pass sensor_data to the callback and take the lock only while examining
pending.status and completing pending.ready.

The callback also visits non-Sensor Hub children. When HID battery strength
support is enabled, the HID input layer may register a power-supply child
without platform_data. Skip children without Sensor Hub data before
dereferencing it.

Testing:
- With CONFIG_HID_BATTERY_STRENGTH=y, ran a UHID Sensor Hub/Joystick device
  exposing Battery Strength through 15 create/destroy cycles across three
  QEMU boots. The power-supply child was found each time; no Oops, BUG, or
  KASAN report occurred.
- In the same configuration, hid_bpf passed 45 tests with 1 skip, hidraw
  passed 27 tests, and hid-core, hid-apple, hid-gamepad, hid-ite,
  hid-keyboard, and hid-mouse passed.
- The full HID suite was not completed; it stopped during hid-multitouch.
- The #syz test request was rejected because syzbot's automated patch
  testing is temporarily unavailable.

Fixes: 8a5b38c3fd70 ("HID: hid-sensor-hub: don't use stale platform-data on remove")
Reported-by: syzbot+fb951970a334aaff00ba@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=fb951970a334aaff00ba
Signed-off-by: Zheng Shuhao <viennaoffh@gmail.com>
---
Changes in v2:
- Pass sensor_data to the callback instead of NULL.
- Skip children without Sensor Hub platform_data; add a battery-child test.
- Add Fixes and correct the syzbot address; remove the self-added Tested-by.

 drivers/hid/hid-sensor-hub.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/drivers/hid/hid-sensor-hub.c b/drivers/hid/hid-sensor-hub.c
index 6470a290ebfc5..4c447f62480b5 100644
--- a/drivers/hid/hid-sensor-hub.c
+++ b/drivers/hid/hid-sensor-hub.c
@@ -804,9 +804,16 @@ static int sensor_hub_probe(struct hid_device *hdev,
 static int sensor_hub_finalize_pending_fn(struct device *dev, void *data)
 {
 	struct hid_sensor_hub_device *hsdev = dev->platform_data;
+	struct sensor_hub_data *sensor_data = data;
+	unsigned long flags;
+
+	if (!hsdev)
+		return 0;
 
+	spin_lock_irqsave(&sensor_data->lock, flags);
 	if (hsdev->pending.status)
 		complete(&hsdev->pending.ready);
+	spin_unlock_irqrestore(&sensor_data->lock, flags);
 
 	return 0;
 }
@@ -814,16 +821,13 @@ static int sensor_hub_finalize_pending_fn(struct device *dev, void *data)
 static void sensor_hub_remove(struct hid_device *hdev)
 {
 	struct sensor_hub_data *data = hid_get_drvdata(hdev);
-	unsigned long flags;
 
 	hid_dbg(hdev, " hardware removed\n");
 	hid_hw_close(hdev);
 	hid_hw_stop(hdev);
 
-	spin_lock_irqsave(&data->lock, flags);
-	device_for_each_child(&hdev->dev, NULL,
+	device_for_each_child(&hdev->dev, data,
 			      sensor_hub_finalize_pending_fn);
-	spin_unlock_irqrestore(&data->lock, flags);
 
 	mfd_remove_devices(&hdev->dev);
 	mutex_destroy(&data->mutex);
-- 

  parent reply	other threads:[~2026-11-20 13:50 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-11-20  7:56 [PATCH] HID: sensor-hub: Avoid holding spinlock across child iteration Zheng Shuhao
2026-11-20  9:34 ` sashiko-bot
2026-11-20 10:50 ` Joshua Crofts
2026-11-20 10:50   ` syzbot
2026-11-20 11:09   ` Joshua Crofts
2026-11-20 11:09     ` syzbot
2026-11-20 12:14 ` Srinivas Pandruvada
2026-11-20 13:49   ` Zheng Shuhao
2026-11-20 13:50 ` Zheng Shuhao [this message]
2026-11-20 15:12   ` [PATCH v2] " Srinivas Pandruvada
2026-11-20 15:30     ` Srinivas Pandruvada
2026-11-20 17:05       ` Zheng Shuhao
2026-11-20 17:56         ` Srinivas Pandruvada

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20261120135005.566-1-viennaoffh@gmail.com \
    --to=viennaoffh@gmail.com \
    --cc=ayaanmirzabaig85@gmail.com \
    --cc=bentiss@kernel.org \
    --cc=heiko@sntech.de \
    --cc=jic23@kernel.org \
    --cc=jikos@kernel.org \
    --cc=lee@kernel.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=srinivas.pandruvada@linux.intel.com \
    --cc=syzbot+fb951970a334aaff00ba@syzkaller.appspotmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.