From: Ondrej Zary <linux@zary.sk>
To: "Hans de Goede" <hansg@kernel.org>,
"Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
Cc: platform-driver-x86@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH] Introduce Synology NAS x86 platform driver
Date: Fri, 20 Nov 2026 21:11:38 +0100 [thread overview]
Message-ID: <20261120201139.4148644-1-linux@zary.sk> (raw)
Add platform driver for Synology x86-based NAS devices to support HDD LEDs
controller by ICH9 GPIO pins.
Only DS411+II is supported for now (DS411+ should be the same except CPU).
Buttons and other LEDs are not supported by this driver because they're
controlled by a PIC MCU (connected through serial port).
Signed-off-by: Ondrej Zary <linux@zary.sk>
---
drivers/platform/x86/Kconfig | 14 ++++
drivers/platform/x86/Makefile | 3 +
drivers/platform/x86/synology-x86.c | 126 ++++++++++++++++++++++++++++
3 files changed, 143 insertions(+)
create mode 100644 drivers/platform/x86/synology-x86.c
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index 9ce384e0475e..04f6452b5a32 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -1059,6 +1059,20 @@ config OXP_EC
source "drivers/platform/x86/tuxedo/Kconfig"
+config SYNOLOGY_X86
+ tristate "Synology x86 NAS Platform Driver"
+ depends on GPIOLIB
+ depends on LPC_ICH
+ depends on GPIO_ICH
+ depends on LEDS_CLASS
+ select LEDS_GPIO
+ help
+ This driver provides support for the HDD LEDs on Synology x86 NAS
+ devices.
+
+ To compile this driver as a module, choose M here: the module
+ will be called synology-x86.
+
endif # X86_PLATFORM_DEVICES
config P2SB
diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
index 229057234d00..a1806eb0efc9 100644
--- a/drivers/platform/x86/Makefile
+++ b/drivers/platform/x86/Makefile
@@ -166,3 +166,6 @@ obj-$(CONFIG_SEL3350_PLATFORM) += sel3350-platform.o
# OneXPlayer
obj-$(CONFIG_OXP_EC) += oxpec.o
+
+# Synology
+obj-$(CONFIG_SYNOLOGY_X86) += synology-x86.o
diff --git a/drivers/platform/x86/synology-x86.c b/drivers/platform/x86/synology-x86.c
new file mode 100644
index 000000000000..2fcf735ba3be
--- /dev/null
+++ b/drivers/platform/x86/synology-x86.c
@@ -0,0 +1,126 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+/*
+ * Synology x86 NAS platform driver
+ *
+ * Inspired by platform/x86/meraki-mx100.c
+ *
+ * Copyright (C) 2026 Ondrej Zary <linux@zary.sk>
+ */
+
+#include <linux/dmi.h>
+#include <linux/pci.h>
+#include <linux/err.h>
+#include <linux/gpio/machine.h>
+#include <linux/kernel.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+static const struct gpio_led synology_leds[] = {
+ { .name = "synology:green:hdd1" },
+ { .name = "synology:amber:hdd1" },
+ { .name = "synology:green:hdd2" },
+ { .name = "synology:amber:hdd2" },
+ { .name = "synology:green:hdd3" },
+ { .name = "synology:amber:hdd3" },
+ { .name = "synology:green:hdd4" },
+ { .name = "synology:amber:hdd4" },
+};
+
+static const struct gpio_led_platform_data synology_leds_pdata = {
+ .num_leds = ARRAY_SIZE(synology_leds),
+ .leds = synology_leds,
+};
+
+#define GPIO_ICH_DRIVER_NAME "gpio_ich"
+
+static struct gpiod_lookup_table synology_leds_table = {
+ .dev_id = "leds-gpio",
+ .table = {
+ GPIO_LOOKUP_IDX(GPIO_ICH_DRIVER_NAME, 16, NULL, 0, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX(GPIO_ICH_DRIVER_NAME, 18, NULL, 1, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX(GPIO_ICH_DRIVER_NAME, 20, NULL, 2, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX(GPIO_ICH_DRIVER_NAME, 32, NULL, 3, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX(GPIO_ICH_DRIVER_NAME, 33, NULL, 4, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX(GPIO_ICH_DRIVER_NAME, 34, NULL, 5, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX(GPIO_ICH_DRIVER_NAME, 49, NULL, 6, GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP_IDX(GPIO_ICH_DRIVER_NAME, 55, NULL, 7, GPIO_ACTIVE_HIGH),
+ {}
+ }
+};
+
+static const struct dmi_system_id synology_systems[] __initconst = {
+ {
+ .ident = "DS411+", /* DS411+II is the same with faster CPU */
+ .matches = {
+ /* Synology did not put anything in DMI strings */
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "To Be Filled By O.E.M."),
+ DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "To Be Filled By O.E.M."),
+ DMI_EXACT_MATCH(DMI_BOARD_NAME, "To be filled by O.E.M."),
+ DMI_EXACT_MATCH(DMI_BIOS_DATE, "05/21/2012"),
+ },
+ },
+ {}
+};
+MODULE_DEVICE_TABLE(dmi, synology_systems);
+
+static struct platform_device *synology_leds_pdev;
+
+static int __init synology_init(void)
+{
+ int ret;
+
+ static const struct pci_device_id pci_sii3531[] = {
+ { PCI_DEVICE_SUB(PCI_VENDOR_ID_CMD, 0x3531, PCI_VENDOR_ID_CMD, 0x3531) },
+ { }
+ };
+
+ static const struct pci_device_id pci_i82574l[] = {
+ { PCI_DEVICE_SUB(PCI_VENDOR_ID_INTEL, 0x10d3, PCI_VENDOR_ID_INTEL, 0x0000) },
+ { }
+ };
+
+ const struct dmi_system_id *dmi = dmi_first_match(synology_systems);
+
+ if (!dmi)
+ return -ENODEV;
+
+ /* DS411+ DMI match is too generic, confirm by onboard PCI devices */
+ if (!strcmp(dmi->ident, "DS411+")) {
+ if (!pci_dev_present(pci_sii3531)
+ || !pci_dev_present(pci_i82574l))
+ return -ENODEV;
+ }
+
+ pr_info("Detected Synology NAS %s\n", dmi->ident);
+
+ gpiod_add_lookup_table(&synology_leds_table);
+
+ synology_leds_pdev = platform_device_register_data(NULL,
+ "leds-gpio", PLATFORM_DEVID_NONE, &synology_leds_pdata,
+ sizeof(synology_leds_pdata));
+ if (IS_ERR(synology_leds_pdev)) {
+ pr_err("error registering platform device: %ld\n", PTR_ERR(synology_leds_pdev));
+ ret = PTR_ERR(synology_leds_pdev);
+ goto err;
+ }
+
+ return 0;
+
+err:
+ gpiod_remove_lookup_table(&synology_leds_table);
+ return ret;
+}
+module_init(synology_init);
+
+static void __exit synology_exit(void)
+{
+ platform_device_unregister(synology_leds_pdev);
+ gpiod_remove_lookup_table(&synology_leds_table);
+}
+module_exit(synology_exit);
+
+MODULE_AUTHOR("Ondrej Zary <linux@zary.sk>");
+MODULE_DESCRIPTION("Synology x86 NAS Platform Driver");
+MODULE_LICENSE("GPL");
--
Ondrej Zary
next reply other threads:[~2026-11-20 20:11 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-20 20:11 Ondrej Zary [this message]
2026-11-20 21:01 ` [PATCH] Introduce Synology NAS x86 platform driver Ilpo Järvinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261120201139.4148644-1-linux@zary.sk \
--to=linux@zary.sk \
--cc=hansg@kernel.org \
--cc=ilpo.jarvinen@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=platform-driver-x86@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.