From: Miroslav Cimerman <mc@raidlab.org>
To: linux-btrfs@vger.kernel.org
Cc: David Sterba <dsterba@suse.com>, Chris Mason <mason@kernel.org>,
Naohiro Aota <naohiro.aota@wdc.com>,
Johannes Thumshirn <johannes.thumshirn@wdc.com>,
Qu Wenruo <wqu@suse.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH v2 1/5] btrfs: zoned: take the RAID1 active state from the first present stripe
Date: Sat, 21 Nov 2026 13:45:45 +0000 [thread overview]
Message-ID: <20261121134550.216217-2-mc@raidlab.org> (raw)
In-Reply-To: <20261121134550.216217-1-mc@raidlab.org>
btrfs_load_block_group_raid1() compares the active state of each present
stripe's zone with stripe 0's. A missing device has no active zones. So
with stripe 0 missing, an active zone of a present stripe always
mismatches. A degraded mount then neither activates the block group nor
marks it active. The block group is not on the list of active block
groups, while its zones are active and count against their devices'
active zone limits.
If it is a data block group, writing data to it tries to activate it,
which fails when the active zones left are reserved for metadata. With
no other data block group with room left, the allocation then returns
-EAGAIN, and the write waits for a zone finish forever:
task:dd state:D
btrfs_new_extent_direct
btrfs_dio_iomap_next
iomap_iter
__iomap_dio_rw
btrfs_direct_write
btrfs_do_write_iter
vfs_write
If it is a metadata block group, writing tree blocks to it activates it
with a warning:
WARNING: fs/btrfs/zoned.c:2451 at btrfs_zone_activate+0x72a/0xa60, CPU#1: btrfs/157
btrfs_check_meta_write_pointer
write_meta_extent_buffer
btree_writepages
Compare with the first present stripe instead.
Fixes: 568220fa9657 ("btrfs: zoned: support RAID0/1/10 on top of raid stripe tree")
CC: stable@vger.kernel.org # 6.7+
Signed-off-by: Miroslav Cimerman <mc@raidlab.org>
---
Found by an LLM while testing this series. The fix and the commit
message were prepared with the help of an LLM, which also tested it. I
reviewed everything.
A mismatch between present stripes is not changed, apart from metadata
block groups with a stripe behind, see 4/5. On a degraded mount,
depending on which stripe comes first, the block group is marked active
at load without the zone of the other stripe accounted, or activated at
its first write if it has room left, which can fail as above when no
active zone is left. Both happened before too.
btrfs_load_block_group_raid10() compares the active state with stripe
0's too, but activates the block group on a mismatch instead of
skipping it. With stripe 0 missing, that warns at mount for a metadata
block group, and can fail the mount for a data block group when no
active zone is left. RAID10 also adds a zone capacity of 0 for a
missing first stripe of a pair, which fails the degraded mount once a
block group holds more than the capacity that is left. Neither is
changed in this series. I will send fixes for both.
fs/btrfs/zoned.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/fs/btrfs/zoned.c b/fs/btrfs/zoned.c
index e6ce6f05ad75..8eac6e2283a2 100644
--- a/fs/btrfs/zoned.c
+++ b/fs/btrfs/zoned.c
@@ -1522,6 +1522,7 @@ static int btrfs_load_block_group_raid1(struct btrfs_block_group *bg,
u64 last_alloc)
{
struct btrfs_fs_info *fs_info = bg->fs_info;
+ int first = -1;
int i;
if ((map->type & BTRFS_BLOCK_GROUP_DATA) && !fs_info->stripe_root) {
@@ -1555,6 +1556,9 @@ static int btrfs_load_block_group_raid1(struct btrfs_block_group *bg,
if (zone_info[i].alloc_offset == WP_CONVENTIONAL)
zone_info[i].alloc_offset = last_alloc;
+ if (first < 0)
+ first = i;
+
if (unlikely((zone_info[0].alloc_offset != zone_info[i].alloc_offset) &&
!btrfs_test_opt(fs_info, DEGRADED))) {
btrfs_err(fs_info,
@@ -1562,13 +1566,13 @@ static int btrfs_load_block_group_raid1(struct btrfs_block_group *bg,
btrfs_bg_type_to_raid_name(map->type));
return -EIO;
}
- if (test_bit(0, active) != test_bit(i, active)) {
+ if (test_bit(first, active) != test_bit(i, active)) {
if (unlikely(!btrfs_test_opt(fs_info, DEGRADED) &&
!btrfs_zone_activate(bg))) {
return -EIO;
}
} else {
- if (test_bit(0, active))
+ if (test_bit(first, active))
set_bit(BLOCK_GROUP_FLAG_ZONE_IS_ACTIVE, &bg->runtime_flags);
}
}
--
2.53.0
next prev parent reply other threads:[~2026-11-21 13:46 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-21 13:45 [PATCH v2 0/5] btrfs: zoned: RAID1 block groups with missing or stale stripes Miroslav Cimerman
2026-11-21 13:45 ` Miroslav Cimerman [this message]
2026-11-21 13:45 ` [PATCH v2 2/5] btrfs: zoned: take the RAID1 zone capacity from all present stripes Miroslav Cimerman
2026-11-21 13:45 ` [PATCH v2 3/5] btrfs: zoned: cap full RAID1 zones at the block group's capacity Miroslav Cimerman
2026-11-21 13:45 ` [PATCH v2 4/5] btrfs: zoned: use the highest RAID1 write pointer on degraded mounts Miroslav Cimerman
2026-11-21 13:45 ` [PATCH v2 5/5] btrfs: tests: zoned: add RAID1 cases with missing or stale stripes Miroslav Cimerman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261121134550.216217-2-mc@raidlab.org \
--to=mc@raidlab.org \
--cc=dsterba@suse.com \
--cc=johannes.thumshirn@wdc.com \
--cc=linux-btrfs@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mason@kernel.org \
--cc=naohiro.aota@wdc.com \
--cc=wqu@suse.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.