From: Pierre Morel <pmorel@linux.ibm.com>
To: David Hildenbrand <david@redhat.com>, borntraeger@de.ibm.com
Cc: linux-kernel@vger.kernel.org, cohuck@redhat.com,
linux-s390@vger.kernel.org, kvm@vger.kernel.org,
frankja@linux.ibm.com, akrowiak@linux.ibm.com,
pasic@linux.ibm.com, Claudio Imbrenda <imbrenda@linux.ibm.com>
Subject: Re: [PATCH v1] KVM: s390: vsie: fix Do the CRYCB validation first
Date: Mon, 4 Feb 2019 17:17:30 +0100 [thread overview]
Message-ID: <206f8cb5-2be8-9c54-eafb-1a050e71aebc@linux.ibm.com> (raw)
In-Reply-To: <4d3977bf-63ec-5732-b2fc-ea8654f444e3@redhat.com>
On 04/02/2019 16:15, David Hildenbrand wrote:
> On 01.02.19 14:37, Pierre Morel wrote:
>> On 01/02/2019 11:56, David Hildenbrand wrote:
>>> On 01.02.19 10:52, Pierre Morel wrote:
>>>> The case when the SIE for guest3 is not setup for using
>>>> encryption keys nor Adjunct processor but the guest2
>>>> does use these features was not properly handled.
>>>>
>>>> This leads SIE entry for guest3 to crash with validity intercept
>>>> because the guest2, not having the use of encryption keys nor
>>>> Adjunct Processor did not initialize the CRYCB designation.
>>>>
>>>> In the case where none of ECA_APIE, ECB3_AES or ECB3_DEA
>>>> are set in guest3 a format 0 CRYCB is allowed for guest3
>>>> and the CRYCB designation in the SIE for guest3 is not checked
>>>> on SIE entry.
>>>>
>>>> Let's allow the CRYCD designation to be ignored when the
>>>> SIE for guest3 is not initialized for encryption key usage
>>>> nor AP.
>>>>
>>>> Fixup: d6f6959 (KVM: s390: vsie: Do the CRYCB validation first)
>>>>
>>>> Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
>>>> Reported-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
>>>> ---
>>>> arch/s390/kvm/vsie.c | 3 +++
>>>> 1 file changed, 3 insertions(+)
>>>>
>>>> diff --git a/arch/s390/kvm/vsie.c b/arch/s390/kvm/vsie.c
>>>> index a153257..a748f76 100644
>>>> --- a/arch/s390/kvm/vsie.c
>>>> +++ b/arch/s390/kvm/vsie.c
>>>> @@ -300,6 +300,9 @@ static int shadow_crycb(struct kvm_vcpu *vcpu, struct vsie_page *vsie_page)
>>>> if (!apie_h && !key_msk)
>>>> return 0;
>>>>
>>>> + if (!(scb_o->eca & ECA_APIE) && !(scb_o->ecb3 & (ECB3_AES | ECB3_DEA)))
>>>> + return 0;
>>>> +
>>>> if (!crycb_addr)
>>>> return set_validity_icpt(scb_s, 0x0039U);
>>>>
>>>>
>>>
>>> The original patch said
>>>
>>> "We need to handle the validity checks for the crycb, no matter what the
>>> settings for the keywrappings are. So lets move the keywrapping checks
>>> after we have done the validy checks."
>>>
>>> Can you explain why keywrapping now is important? These patches seem to
>>> contradict.
>>>
>>
>> No it does not, having the flags set or not is part of the validity check.
>> but, I acted too fast.
>>
>> The problem seems to be even clearer:
>> key_msk is defined as
>> int key_msk = test_kvm_facility(vcpu->kvm, 76);
>>
>> If it is defined, as it should for a mask, as
>> (scb_o->ecb3 & (ECB3_AES | ECB3_DEA))
>>
>> all is clear..., key_msk is not use but for this test, so I do not
>> understand why it is set as facility 76.
>>
>> so I think I better do:
>>
>>
>> diff --git a/arch/s390/kvm/vsie.c b/arch/s390/kvm/vsie.c
>> index a153257..30843a8 100644
>> --- a/arch/s390/kvm/vsie.c
>> +++ b/arch/s390/kvm/vsie.c
>> @@ -289,7 +289,7 @@ static int shadow_crycb(struct kvm_vcpu *vcpu,
>> struct vsie_page *vsie_page)
>> unsigned long *b1, *b2;
>> u8 ecb3_flags;
>> int apie_h;
>> - int key_msk = test_kvm_facility(vcpu->kvm, 76);
>> + int key_msk = scb_o->ecb3 & (ECB3_AES | ECB3_DEA);
>> int fmt_o = crycbd_o & CRYCB_FORMAT_MASK;
>> int fmt_h = vcpu->arch.sie_block->crycbd & CRYCB_FORMAT_MASK;
>> int ret = 0;
>>
>>
>> So just define a mask a mask.
>> I verify the functionality and test on Monday and if in between it
>> seems better to you so too I post the patch.
>
> Without documentation at hand I cannot really judge what is the right
> approach. You have to read the architecture description very carefully
> and thimk about the different scenarios. I cannot help here.
>
> test_kvm_facility(vcpu->kvm, 76) means "hardware knows key wrapping exists"
>
> scb_o->ecb3 & (ECB3_AES | ECB3_DEA) means "key wrapping was actually
> enabled for AES or DEA"
Right.
We also must take care of the format.
So not sure my propositions are right.
And helas I have the documentation :)
So ... I have to read it again again.
Regards,
Pierre
>
>>
>> Thanks,
>> Pierre
>>
>
>
--
Pierre Morel
Linux/KVM/QEMU in Böblingen - Germany
prev parent reply other threads:[~2019-02-04 16:17 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-01 9:52 [PATCH v1] KVM: s390: vsie: fix Do the CRYCB validation first Pierre Morel
2019-02-01 9:52 ` Pierre Morel
2019-02-01 10:50 ` Cornelia Huck
2019-02-01 13:36 ` Pierre Morel
2019-02-01 10:56 ` David Hildenbrand
2019-02-01 13:37 ` Pierre Morel
2019-02-04 14:48 ` Christian Borntraeger
2019-02-04 16:18 ` Pierre Morel
2019-02-04 15:15 ` David Hildenbrand
2019-02-04 16:17 ` Pierre Morel [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=206f8cb5-2be8-9c54-eafb-1a050e71aebc@linux.ibm.com \
--to=pmorel@linux.ibm.com \
--cc=akrowiak@linux.ibm.com \
--cc=borntraeger@de.ibm.com \
--cc=cohuck@redhat.com \
--cc=david@redhat.com \
--cc=frankja@linux.ibm.com \
--cc=imbrenda@linux.ibm.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-s390@vger.kernel.org \
--cc=pasic@linux.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.