Re: [RFC v2 6/6] ARM: dts: blanche: add SCIF1 and MAX9260 deserializer

[Laurent Pinchart <laurent.pinchart@ideasonboard.com>]

Hi Ulrich,

Thank you for the patch.

On Monday 17 Jul 2017 17:24:36 Ulrich Hecht wrote:
> Adds serial port SCIF1 and the MAX9260 deserializers connected to it.
> 
> Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
> ---
>  arch/arm/boot/dts/r8a7792-blanche.dts | 52 +++++++++++++++++++++++++++++++

You're probably aware of this already, but you need to document the DT 
bindings :-)

>  1 file changed, 52 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/r8a7792-blanche.dts
> b/arch/arm/boot/dts/r8a7792-blanche.dts index 9b67dca..2ae9a87 100644
> --- a/arch/arm/boot/dts/r8a7792-blanche.dts
> +++ b/arch/arm/boot/dts/r8a7792-blanche.dts
> @@ -21,6 +21,7 @@
>  	aliases {
>  		serial0 = &scif0;
>  		serial1 = &scif3;
> +		serial2 = &scif1;
>  	};
> 
>  	chosen {
> @@ -186,6 +187,16 @@
>  		gpio = <&gpio11 12 GPIO_ACTIVE_HIGH>;
>  		enable-active-high;
>  	};
> +
> +	mux: mux-controller {
> +		compatible = "gpio-mux";
> +		#mux-control-cells = <0>;
> +
> +		mux-gpios = <&gpio5 12 GPIO_ACTIVE_HIGH>,
> +			    <&gpio5 13 GPIO_ACTIVE_HIGH>,
> +			    <&gpio5 14 GPIO_ACTIVE_HIGH>,
> +			    <&gpio5 15 GPIO_ACTIVE_HIGH>;
> +	};
>  };
> 
>  &extal_clk {
> @@ -202,6 +213,11 @@
>  		function = "scif0";
>  	};
> 
> +	scif1_pins: scif1 {
> +		groups = "scif1_data";
> +		function = "scif1";
> +	};
> +
>  	scif3_pins: scif3 {
>  		groups = "scif3_data";
>  		function = "scif3";
> @@ -246,6 +262,42 @@
>  	status = "okay";
>  };
> 
> +&scif1 {
> +	pinctrl-0 = <&scif1_pins>;
> +	pinctrl-names = "default";
> +
> +	status = "okay";
> +
> +	mux-controls = <&mux>;
> +
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +	gmsl-deserializer@0 {
> +		compatible = "maxim,max9260";
> +		reg = <0x8>;
> +	};
> +	gmsl-deserializer@1 {
> +		compatible = "maxim,max9260";
> +		reg = <0x9>;
> +	};
> +	gmsl-deserializer@2 {
> +		compatible = "maxim,max9260";
> +		reg = <0xa>;
> +	};
> +	gmsl-deserializer@3 {
> +		compatible = "maxim,max9260";
> +		reg = <0xb>;
> +	};
> +	gmsl-deserializer@4 {
> +		compatible = "maxim,max9260";
> +		reg = <0x4>;
> +	};
> +	gmsl-deserializer@5 {
> +		compatible = "maxim,max9260";
> +		reg = <0x5>;
> +	};
> +};
> +
>  &scif3 {
>  	pinctrl-0 = <&scif3_pins>;
>  	pinctrl-names = "default";

-- 
Regards,

Laurent Pinchart