[PATCH] odroid-go2: remove setting SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR

[Heiko Stuebner <heiko.stuebner@theobroma-systems.com>]

Hi Roger,

Am Samstag, 13. Februar 2021, 16:59:01 CET schrieb Roger Pau Monne:
> From: Roger Pau Monn? <royger@FreeBSD.org>
> 
> Using a non-default SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR setting makes the
> resulting u-boot-rockchip.bin unbootable, as it gets stuck after SPL.
> Removing the setting from the defconfig allows U-Boot to load
> successfully.

Hmm, I'd disagree slightly.

In the rockchip-common.h the CONFIG_SPL_PAD_TO is defined as

/* ((CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR - 64) * 512) */
#define CONFIG_SPL_PAD_TO		8355840

so it's a static value but based on the MMCSD_RAW_MODE... config option.

So instead of mandating one specific MMCSD_RAW_MODE... value
that CONFIG_SPL_PAD_TO should be defined based on the the
actual config value of CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR
and not some static number that then gets enforced for all boards.


Heiko


> 
> Signed-off-by: Roger Pau Monn? <royger@FreeBSD.org>
> ---
> Cc: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
> ---
>  configs/odroid-go2_defconfig | 1 -
>  1 file changed, 1 deletion(-)
> 
> diff --git a/configs/odroid-go2_defconfig b/configs/odroid-go2_defconfig
> index 853890901a..5632b15611 100644
> --- a/configs/odroid-go2_defconfig
> +++ b/configs/odroid-go2_defconfig
> @@ -33,7 +33,6 @@ CONFIG_SPL_BOOTROM_SUPPORT=y
>  # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
>  CONFIG_SPL_STACK_R=y
>  # CONFIG_TPL_BANNER_PRINT is not set
> -CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x200
>  CONFIG_SPL_CRC32_SUPPORT=y
>  CONFIG_SPL_I2C_SUPPORT=y
>  CONFIG_SPL_POWER_SUPPORT=y
>