Re: [B.A.T.M.A.N.] [PATCH-next v3 1/2] batctl: check for batman interface

[Marek Lindner <mareklindner@neomailbox.ch>]

[-- Attachment #1: Type: text/plain, Size: 1103 bytes --]

On Wednesday 12 March 2014 17:04:47 Simon Wunderlich wrote:
> From: Simon Wunderlich <simon@open-mesh.com>
> 
> Check if the interface supplied by -m (or bat0 by default) is actually a
> batman interface. The check is performed by testing if the sysfs path
> is available.
> 
> This change is required since debugfs now contains originator tables per
> hard interface. This might be confusing for users as batctl -m eth0 o
> will now (accidently) print these tables without eth0 beeing a batman
> interface, assuming eth0 is a hard interface used by batman-adv.
> 
> Some reordering of commands were required to first allow commands which
> don't depend on a (correctly set up) mesh interface, like bisect or
> interface.
> 
> Signed-off-by: Simon Wunderlich <simon@open-mesh.com>
> ---
> Changes to PATCHv2:
> 
>  * fix VLAN check, this is now similar to the sysfs handling code
> ---
>  main.c |   32 +++++++++++++++++---------------
>  sys.c  |   30 ++++++++++++++++++++++++++++++
>  sys.h  |    1 +
>  3 files changed, 48 insertions(+), 15 deletions(-)

Applied in revision da65d62.

Thanks,
Marek


[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 490 bytes --]