All of lore.kernel.org
 help / color / mirror / Atom feed
From: Emil Meier <emil276me@yahoo.com>
To: Andy Walls <awalls@md.metrocast.net>
Cc: linux-media@vger.kernel.org
Subject: Re: Analog input for Hauppauge express-card HVR-1400
Date: Tue, 29 Mar 2011 14:34:51 +0100 (BST)	[thread overview]
Message-ID: <212680.72169.qm@web29506.mail.ird.yahoo.com> (raw)
In-Reply-To: <1301168432.2338.19.camel@localhost>

[-- Attachment #1: Type: text/plain, Size: 2890 bytes --]

>----- Original Message ----

>On Tue, 2011-03-22 at 19:57 +0000, Emil Meier wrote:
>> The patch in cx25840-core.c was needed to get PAL support for the video input. 
>
>> If the line
>> cx25840_write(client, 0x2, 0x76);
>> is needed by other cards,

> You patches have a problem:

> Your first patch modifies a card entry in the cx23885 driver, but your
> second patch changes the cx231xx_initialize() function in
> cx25840-core.c. 

>http://git.linuxtv.org/media_tree.git?a=blob;f=drivers/media/video/cx25840/cx25840-core.c;h=35796e0352475b6536bfd47315107e418e6716fa;hb=refs/heads/staging/for_v2.6.39#l638
>8

> The second patch should have no effect on the operation of a CX2388[578]
> based card.


Thanks Andy,
your are right, the patch is applied in the wrong function. In earlyer kernels, 
I have placed the patch in cx23885_initialize()...
Checking this again I found the patch not working in 2.6.36.4 vanilla...The 
patches are working in 2.6.35.11 vanilla. But there are a lot af changes between 
2.6.35.11 and 2.6.36.4  in the code.
I have attached the patches against 2.6.35.11 vanilla. The last time I have 
tried the dvb-drivers, they don't compile against older kenrels...
With 2.6.36.4 and the last patch I get the following error:

2.6.36.4:
cx23885[1]: hauppauge eeprom: model=80019
cx25840 2-0044: cx23885 A/V decoder found @ 0x88 (cx23885[1])
cx25840: probe of 2-0044 failed with error -34
tuner 1-0061: chip found @ 0xc2 (cx23885[1])
xc2028 1-0061: creating new instance
xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner
....
while grabbing:
xc2028 1-0061: xc2028/3028 firmware name not set!
cx23885[1]: VID A - dma channel status dump
cx23885[1]:   cmds: init risc lo   : 0x37c70000
cx23885[1]:   cmds: init risc hi   : 0x00000000
cx23885[1]:   cmds: cdt base       : 0x000104c0
cx23885[1]:   cmds: cdt size       : 0x0000000c
cx23885[1]:   cmds: iq base        : 0x00010380
cx23885[1]:   cmds: iq size        : 0x00000010
cx23885[1]:   cmds: risc pc lo     : 0x37c70034
cx23885[1]:   cmds: risc pc hi     : 0x00000000
cx23885[1]:   cmds: iq wr ptr      : 0x000040ed
cx23885[1]:   cmds: iq rd ptr      : 0x000040e1
cx23885[1]:   cmds: cdt current    : 0x000104c8
cx23885[1]:   cmds: pci target lo  : 0x00000000
cx23885[1]:   cmds: pci target hi  : 0x00000000
cx23885[1]:   cmds: line / byte    : 0x00000000
cx23885[1]:   risc0: 0x80008000 [ sync resync count=0 ]
cx23885[1]:   risc1: 0x1c000500 [ write sol eol count=1280 ]
cx23885[1]:   risc2: 0x37cb7500 [ INVALID eol irq2 irq1 23 22 19 cnt1 cnt0 14 13
 


instead of: 2.6.35.11:
cx23885[2]: hauppauge eeprom: model=80019
cx25840 2-0044: cx23885 A/V decoder found @ 0x88 (cx23885[2])
cx25840 2-0044: loaded v4l-cx23885-avcore-01.fw firmware (16382 bytes)
tuner 1-0061: chip found @ 0xc2 (cx23885[2])
xc2028 1-0061: creating new instance

Emil

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: patch-cx23885-cards.c.diff --]
[-- Type: text/x-patch; name="patch-cx23885-cards.c.diff", Size: 1543 bytes --]

*** linux-2.6.35.11/drivers/media/video/cx23885/cx23885-cards.c	2011-02-06 20:04:07.000000000 +0100
--- /usr/src/linux-2.6.35.11/drivers/media/video/cx23885/cx23885-cards.c	2011-03-29 14:29:24.000000000 +0200
***************
*** 144,150 ****
--- 144,173 ----
  	},
  	[CX23885_BOARD_HAUPPAUGE_HVR1400] = {
  		.name		= "Hauppauge WinTV-HVR1400",
+ 		.porta          = CX23885_ANALOG_VIDEO,
  		.portc		= CX23885_MPEG_DVB,
+ 		.tuner_type	= TUNER_XC2028,
+ 		.tuner_addr	= 0x61, /* 0x84 >> 1 */
+ 		.input          = {{
+ 		     .type   = CX23885_VMUX_TELEVISION,
+ 		     .vmux   =       CX25840_VIN7_CH3 |
+ 		     CX25840_VIN5_CH2 |
+ 		     CX25840_VIN2_CH1,
+ 		     .gpio0  = 0,
+ 		   }, {
+ 		     .type   = CX23885_VMUX_COMPOSITE1,
+ 		     .vmux   =       CX25840_VIN7_CH3 |
+ 		     CX25840_VIN4_CH2 |
+ 		     CX25840_VIN6_CH1,
+ 		     .gpio0  = 0,
+ 		   }, {
+ 		     .type   = CX23885_VMUX_SVIDEO,
+ 		     .vmux   =       CX25840_VIN7_CH3 |
+ 		     CX25840_VIN4_CH2 |
+ 		     CX25840_VIN8_CH1 |
+ 		     CX25840_SVIDEO_ON,
+ 		     .gpio0  = 0,
+ 	       	   } },
  	},
  	[CX23885_BOARD_DVICO_FUSIONHDTV_7_DUAL_EXP] = {
  		.name		= "DViCO FusionHDTV7 Dual Express",
***************
*** 1102,1107 ****
--- 1125,1131 ----
  	case CX23885_BOARD_LEADTEK_WINFAST_PXDVR3200_H:
  	case CX23885_BOARD_COMPRO_VIDEOMATE_E650F:
  	case CX23885_BOARD_NETUP_DUAL_DVBS2_CI:
+ 	case CX23885_BOARD_HAUPPAUGE_HVR1400:
  	case CX23885_BOARD_COMPRO_VIDEOMATE_E800:
  	case CX23885_BOARD_HAUPPAUGE_HVR1850:
  	case CX23885_BOARD_MYGICA_X8506:

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #3: patch-cx25840-core.c.diff --]
[-- Type: text/x-patch; name="patch-cx25840-core.c.diff", Size: 690 bytes --]

*** linux-2.6.35.11/drivers/media/video/cx25840/cx25840-core.c	2011-02-06 20:04:07.000000000 +0100
--- /usr/src/linux-2.6.35.11/drivers/media/video/cx25840/cx25840-core.c	2011-03-29 14:50:01.000000000 +0200
***************
*** 282,288 ****
  	 * '887: 25.000000 MHz
  	 * '888: 50.000000 MHz
  	 */
! 	cx25840_write(client, 0x2, 0x76);
  
  	/* Power up all the PLL's and DLL */
  	cx25840_write(client, 0x1, 0x40);
--- 282,290 ----
  	 * '887: 25.000000 MHz
  	 * '888: 50.000000 MHz
  	 */
! 	/* This changes for the cx23888 products */
! 	// not for hvr1400 em 090818
! 	//cx25840_write(client, 0x2, 0x76);
  
  	/* Power up all the PLL's and DLL */
  	cx25840_write(client, 0x1, 0x40);

      reply	other threads:[~2011-03-29 13:34 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-03-22 19:57 Analog input for Hauppauge express-card HVR-1400 Emil Meier
2011-03-26 19:40 ` Andy Walls
2011-03-29 13:34   ` Emil Meier [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=212680.72169.qm@web29506.mail.ird.yahoo.com \
    --to=emil276me@yahoo.com \
    --cc=awalls@md.metrocast.net \
    --cc=linux-media@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.