From: Enrico Mioso <mrkiko.rs@gmail.com>
To: ath10k@lists.infradead.org
Cc: Christian Lamparter <chunkeey@gmail.com>
Subject: [V2] ath10k-firmware: QCA9888 hw2.0: add GL.iNet GL-B2200 specific board file
Date: Mon, 2 May 2022 13:21:53 +0200 (CEST) [thread overview]
Message-ID: <2131f701-ff71-8fbb-353b-e40338b3e80d@gmail.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 1054 bytes --]
Hello all!!
I would like to add a board file for the PCI-E Wi-Fi interface present on the GL.iNet GL-B2200 mesh router, a device added a while ago to OpenWRt.
* Hardware description:
This device seems based on IPQ4019 / AP-DK04.1-C3.
Three radios are used:
- one QCA4019 radio is used for 2.4 GHZ operation (submitted on a previous message)
- one QCA4019 radio is used for 5 GHZ for operating on lower part of 5 GHZ spectrum (submitted on a previous message)
- a QCA9888V2 interface connected over PCI-E to operate on higher part of the 5 GHZ spectrum (contained in this message)
* origin of the board files:
The board file was provided by the manifacturer, who provided the original patch to support the device in OpenWRt.
* ids to be used with the board files
+ bus=pci,bmi-chip-id=0,bmi-board-id=16,variant=GL-B2200
SHA256: 7016cac25e5d35cf037f2f6aa63c03bd124fb521ec40c7843eb9d8424afa1a20
* attached files:
The names of the files are equal to the ID strings in the board-2.bin files, minus the .bin extension of course.
Kind regards,
Enrico
[-- Attachment #2: Type: application/octet-stream, Size: 12064 bytes --]
[-- Attachment #3: Type: text/plain, Size: 146 bytes --]
_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k
next reply other threads:[~2022-05-02 11:22 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-02 11:21 Enrico Mioso [this message]
2022-05-18 11:51 ` [V2] ath10k-firmware: QCA9888 hw2.0: add GL.iNet GL-B2200 specific board file Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2131f701-ff71-8fbb-353b-e40338b3e80d@gmail.com \
--to=mrkiko.rs@gmail.com \
--cc=ath10k@lists.infradead.org \
--cc=chunkeey@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.