Re: [PATCH v4 3/5] media: imx290: Convert to new CCI register access helpers

[Alexander Stein <alexander.stein@ew.tq-group.com>]

Am Dienstag, 15. August 2023, 15:31:55 CEST schrieb Sakari Ailus:
> ********************
> Achtung externe E-Mail: Öffnen Sie Anhänge und Links nur, wenn Sie wissen,
> dass diese aus einer sicheren Quelle stammen und sicher sind. Leiten Sie
> die E-Mail im Zweifelsfall zur Prüfung an den IT-Helpdesk weiter.
> Attention external email: Open attachments and links only if you know that
> they are from a secure source and are safe. In doubt forward the email to
> the IT-Helpdesk to check it. ********************
> 
> Hi Laurent,
> 
> On Tue, Aug 15, 2023 at 04:15:39PM +0300, Laurent Pinchart wrote:
> > Hi Hans,
> > 
> > On Tue, Jun 27, 2023 at 02:51:06PM +0200, Hans de Goede wrote:
> > > Use the new comon CCI register access helpers to replace the private
> > > register access helpers in the imx290 driver.
> > > 
> > > Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> > > Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> > > ---
> > > Note:
> > > 1. This is untested
> > > 2. For reviewers: all the IMX290_REG_?BIT defines in both the register
> > > address defines as well as in various reg-sequences were automatically
> > > changed using search replace.
> > > ---
> > > Changes in v3:
> > > - Fixed a couple of lines > 80 chars
> > > 
> > > Changes in v2:
> > > - New patch in v2 of this series
> > > ---
> > > 
> > >  drivers/media/i2c/Kconfig  |   1 +
> > >  drivers/media/i2c/imx290.c | 360 +++++++++++++++----------------------
> > >  2 files changed, 150 insertions(+), 211 deletions(-)
> > 
> > [snip]
> > 
> > > diff --git a/drivers/media/i2c/imx290.c b/drivers/media/i2c/imx290.c
> > > index b3f832e9d7e1..e78c7b91ae72 100644
> > > --- a/drivers/media/i2c/imx290.c
> > > +++ b/drivers/media/i2c/imx290.c
> > > @@ -21,91 +21,86 @@
> > 
> > [snip]
> > 
> > > @@ -615,63 +605,15 @@ imx290_format_info(const struct imx290 *imx290,
> > > u32 code)> > 
> > >  	return NULL;
> > >  
> > >  }
> > > 
> > > -/*
> > > -----------------------------------------------------------------------
> > > ------ - * Register access
> > > - */
> > > -
> > > -static int __always_unused imx290_read(struct imx290 *imx290, u32 addr,
> > > u32 *value) -{
> > > -	u8 data[3] = { 0, 0, 0 };
> > > -	int ret;
> > > -
> > > -	ret = regmap_raw_read(imx290->regmap, addr & IMX290_REG_ADDR_MASK,
> > > -			      data, (addr >> IMX290_REG_SIZE_SHIFT) & 
3);
> > > -	if (ret < 0) {
> > > -		dev_err(imx290->dev, "%u-bit read from 0x%04x failed: 
%d\n",
> > > -			((addr >> IMX290_REG_SIZE_SHIFT) & 3) * 8,
> > > -			 addr & IMX290_REG_ADDR_MASK, ret);
> > > -		return ret;
> > > -	}
> > > -
> > > -	*value = get_unaligned_le24(data);
> > > -	return 0;
> > > -}
> > > -
> > > -static int imx290_write(struct imx290 *imx290, u32 addr, u32 value, int
> > > *err) -{
> > > -	u8 data[3];
> > > -	int ret;
> > > -
> > > -	if (err && *err)
> > > -		return *err;
> > > -
> > > -	put_unaligned_le24(value, data);
> > 
> > We seem to be having a problem here, as the CCI helpers unconditionally
> > use big endian for the data :-(
> 
> Well spotted. This driver needs to address this.
> 
> It's a hardware issue though. It's the only sensor ever I've seen to have
> little endian registers.

It's getting even worse: There are cameras using this sensor when bulk read is 
broken (VC MIPI IMX327 C, Laurent knows about this peculiar hardware), so 
regmap_config.use_single_read has to be set to true. This is currently not 
possible anymore insode this driver.

Best regards,
Alexander

> > > -
> > > -	ret = regmap_raw_write(imx290->regmap, addr & IMX290_REG_ADDR_MASK,
> > > -			       data, (addr >> IMX290_REG_SIZE_SHIFT) & 
3);
> > > -	if (ret < 0) {
> > > -		dev_err(imx290->dev, "%u-bit write to 0x%04x failed: 
%d\n",
> > > -			((addr >> IMX290_REG_SIZE_SHIFT) & 3) * 8,
> > > -			 addr & IMX290_REG_ADDR_MASK, ret);
> > > -		if (err)
> > > -			*err = ret;
> > > -	}
> > > -
> > > -	return ret;
> > > -}
> > > -
> > 
> > [snip]


-- 
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
http://www.tq-group.com/