Hi,

After some days to learn how I receive logs on another PC, here is my log. The problem is that the PC hangs after a few seconds.
#[?25l#[H#[J#[2;25HGNU GRUB  version 1.98-1ubuntu10
[ 0.000000] Linux version 2.6.32.20-adeos (root@domain.hid) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #1 SMP Wed May 4 22:06:49 CEST 2011 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32.20-adeos root=/dev/sda1 ro console=ttyS0, 38400 console=tty0 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e5000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf780000 (usable) [ 0.000000] BIOS-e820: 00000000bf78e000 - 00000000bf790000 (reserved) [ 0.000000] BIOS-e820: 00000000bf790000 - 00000000bf79e000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bf79e000 - 00000000bf7d0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf7d0000 - 00000000bf7e0000 (reserved) [ 0.000000] BIOS-e820: 00000000bf7ed000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000340000000 (usable) [ 0.000000] DMI present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] last_pfn = 0x340000 max_arch_pfn = 0x400000000 [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] last_pfn = 0xbf780 max_arch_pfn = 0x400000000 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e5000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000bf780000 (usable) [ 0.000000] modified: 00000000bf78e000 - 00000000bf790000 (reserved) [ 0.000000] modified: 00000000bf790000 - 00000000bf79e000 (ACPI data) [ 0.000000] modified: 00000000bf79e000 - 00000000bf7d0000 (ACPI NVS) [ 0.000000] modified: 00000000bf7d0000 - 00000000bf7e0000 (reserved) [ 0.000000] modified: 00000000bf7ed000 - 00000000c0000000 (reserved) [ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000340000000 (usable) [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: 0000000000000000-00000000bf780000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000340000000 [ 0.000000] ACPI: RSDP 00000000000fb620 00024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT 00000000bf790100 00084 (v01 062810 XSDT1507 20100628 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000bf790290 000F4 (v03 062810 FACP1507 20100628 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000bf790540 05B3D (v01 S0081 S0081002 00000002 INTL 20060113) [ 0.000000] ACPI: FACS 00000000bf79e000 00040 [ 0.000000] ACPI: APIC 00000000bf790390 0011E (v01 062810 APIC1507 20100628 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000bf7904b0 0003C (v01 062810 OEMMCFG 20100628 MSFT 00000097) [ 0.000000] ACPI: SPMI 00000000bf7904f0 00041 (v05 062810 OEMSPMI 20100628 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000bf79e040 00072 (v01 062810 OEMB1507 20100628 MSFT 00000097) [ 0.000000] ACPI: SRAT 00000000bf798540 00168 (v01 062810 OEMSRAT 00000001 INTL 00000001) [ 0.000000] ACPI: HPET 00000000bf7986b0 00038 (v01 062810 OEMHPET 20100628 MSFT 00000097) [ 0.000000] ACPI: SSDT 00000000bf7a17f0 0154F (v01 DpgPmm CpuPm 00000012 INTL 20060113) [ 0.000000] ACPI: EINJ 00000000bf7986f0 00130 (v01 AMIER AMI_EINJ 20100628 MSFT 00000097) [ 0.000000] ACPI: BERT 00000000bf798880 00030 (v01 AMIER AMI_BERT 20100628 MSFT 00000097) [ 0.000000] ACPI: ERST 00000000bf7988b0 001B0 (v01 AMIER AMI_ERST 20100628 MSFT 00000097) [ 0.000000] ACPI: HEST 00000000bf798a60 000A8 (v01 AMIER ABC_HEST 20100628 MSFT 00000097) [ 0.000000] SRAT: PXM 0 -> APIC 0 -> Node 0 [ 0.000000] SRAT: PXM 1 -> APIC 32 -> Node 1 [ 0.000000] SRAT: PXM 0 -> APIC 2 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 4 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 16 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 18 -> Node 0 [ 0.000000] SRAT: PXM 0 -> APIC 20 -> Node 0 [ 0.000000] SRAT: PXM 1 -> APIC 34 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 36 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 48 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 50 -> Node 1 [ 0.000000] SRAT: PXM 1 -> APIC 52 -> Node 1 [ 0.000000] SRAT: Node 0 PXM 0 0-c0000000 [ 0.000000] SRAT: Node 0 PXM 0 100000000-1c0000000 [ 0.000000] SRAT: Node 1 PXM 1 1c0000000-340000000 [ 0.000000] Bootmem setup node 0 0000000000000000-00000001c0000000 [ 0.000000] NODE_DATA [0000000000012000 - 0000000000016fff] [ 0.000000] bootmap [0000000000017000 - 000000000004efff] pages 38 [ 0.000000] (6 early reservations) ==> bootmem [0000000000 - 01c0000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 0001b35c24] TEXT DATA BSS ==> [0001000000 - 0001b35c24] [ 0.000000] #3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #4 [0001b36000 - 0001b362c4] BRK ==> [0001b36000 - 0001b362c4] [ 0.000000] #5 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ 0.000000] Bootmem setup node 1 00000001c0000000-0000000340000000 [ 0.000000] NODE_DATA [00000001c0000000 - 00000001c0004fff] [ 0.000000] bootmap [00000001c0005000 - 00000001c0034fff] pages 30 [ 0.000000] (6 early reservations) ==> bootmem [01c0000000 - 0340000000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE [ 0.000000] #2 [0001000000 - 0001b35c24] TEXT DATA BSS [ 0.000000] #3 [000009fc00 - 0000100000] BIOS reserved [ 0.000000] #4 [0001b36000 - 0001b362c4] BRK [ 0.000000] #5 [0000010000 - 0000012000] PGTABLE [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00340000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000bf780 [ 0.000000] 0: 0x00100000 -> 0x001c0000 [ 0.000000] 1: 0x001c0000 -> 0x00340000 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x10] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x12] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x14] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x20] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x22] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x24] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x30] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x32] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x34] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x90] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x91] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0x92] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x93] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0x94] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x95] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0x96] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0x97] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec8a000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 3, version 32, address 0xfec8a000, GSI 24-47 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] SMP: Allowing 24 CPUs, 12 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e5000 [ 0.000000] PM: Registered nosave memory: 00000000000e5000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000bf780000 - 00000000bf78e000 [ 0.000000] PM: Registered nosave memory: 00000000bf78e000 - 00000000bf790000 [ 0.000000] PM: Registered nosave memory: 00000000bf790000 - 00000000bf79e000 [ 0.000000] PM: Registered nosave memory: 00000000bf79e000 - 00000000bf7d0000 [ 0.000000] PM: Registered nosave memory: 00000000bf7d0000 - 00000000bf7e0000 [ 0.000000] PM: Registered nosave memory: 00000000bf7e0000 - 00000000bf7ed000 [ 0.000000] PM: Registered nosave memory: 00000000bf7ed000 - 00000000c0000000 [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000 [ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000) [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:24 nr_node_ids:2 [ 0.000000] PERCPU: Embedded 64 pages/cpu @ffff88002da00000 s231896 r8192 d22056 u262144 [ 0.000000] pcpu-alloc: s231896 r8192 d22056 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 12 14 [0] 16 18 20 22 -- -- -- -- [ 0.000000] pcpu-alloc: [1] 06 07 08 09 10 11 13 15 [1] 17 19 21 23 -- -- -- -- [ 0.000000] Built 2 zonelists in Zone order, mobility grouping on. Total pages: 3096746 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32.20-adeos root=/dev/sda1 ro console=ttyS0, 38400 console=tty0 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.000000] Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 [ 0.000000] software IO TLB at phys 0x20000000 - 0x24000000 [ 0.000000] Memory: 12317716k/13631488k available (5458k kernel code, 1057732k absent, 256040k reserved, 2598k data, 860k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=24, Nodes=2 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:1008 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] I-pipe 2.7-03: pipeline enabled. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] console [ttyS0] enabled [ 0.000000] allocated 125829120 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.010000] Fast TSC calibration using PIT [ 0.020000] Detected 2666.389 MHz processor. [ 0.000008] Calibrating delay loop (skipped), value calculated using timer frequency.. 5332.77 BogoMIPS (lpj=26663890) [ 0.032230] Security Framework initialized [ 0.044567] SELinux: Disabled at boot. [ 0.057149] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.082700] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.105764] Mount-cache hash table entries: 256 [ 0.119514] Initializing cgroup subsys ns [ 0.131593] Initializing cgroup subsys cpuacct [ 0.144957] Initializing cgroup subsys memory [ 0.158071] Initializing cgroup subsys devices [ 0.171450] Initializing cgroup subsys freezer [ 0.184814] Initializing cgroup subsys net_cls [ 0.198200] CPU: Physical Processor ID: 0 [ 0.210972] CPU: Processor Core ID: 0 [ 0.221997] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.236218] CPU: L2 cache: 256K [ 0.245681] CPU: L3 cache: 12288K [ 0.255668] CPU 0/0x0 -> Node 0 [ 0.265132] mce: CPU supports 9 MCE banks [ 0.277203] CPU0: Thermal monitoring enabled (TM1) [ 0.291628] CPU 0 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 CMCI:8 [ 0.309619] Performance Events: Westmere events, Intel PMU driver. [ 0.328339] ... version: 3 [ 0.340403] ... bit width: 48 [ 0.352727] ... generic registers: 4 [ 0.364792] ... value mask: 0000ffffffffffff [ 0.380757] ... max period: 000000007fffffff [ 0.396721] ... fixed-purpose events: 3 [ 0.408786] ... event mask: 000000070000000f [ 0.424757] ACPI: Core revision 20090903 [ 0.469062] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.486351] ftrace: allocating 21289 entries in 84 pages [ 0.507848] Setting APIC routing to physical flat [ 0.522421] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.640479] ..MP-BIOS bug: 8254 timer not connected to IO-APIC [ 0.658031] ...trying to set up timer (IRQ0) through the 8259A ... [ 0.676621] ..... (found apic 0 pin 2) ... [ 0.789836] ....... works. [ 0.797996] CPU0: Intel(R) Xeon(R) CPU X5650 @ 2.67GHz stepping 02 [ 0.932178] Booting processor 1 APIC 0x2 ip 0x6000 [ 0.957334] Initializing CPU#1 [ 1.102079] CPU: Physical Processor ID: 0 [ 1.102080] CPU: Processor Core ID: 1 [ 1.102082] CPU: L1 I cache: 32K, L1 D cache: 32K [ 1.102083] CPU: L2 cache: 256K [ 1.102084] CPU: L3 cache: 12288K [ 1.102086] CPU 1/0x2 -> Node 0 [ 1.102098] CPU1: Thermal monitoring enabled (TM1) [ 1.102101] CPU 1 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8 [ 1.102181] CPU1: Intel(R) Xeon(R) CPU X5650 @ 2.67GHz stepping 02 [ 1.230549] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 1.270018] Booting processor 2 APIC 0x4 ip 0x6000 [ 1.295002] Initializing CPU#2 [ 1.442085] CPU: Physical Processor ID: 0 [ 1.442086] CPU: Processor Core ID: 2 [ 1.442088] CPU: L1 I cache: 32K, L1 D cache: 32K [ 1.442090] CPU: L2 cache: 256K [ 1.442091] CPU: L3 cache: 12288K [ 1.442093] CPU 2/0x4 -> Node 0 [ 1.442103] CPU2: Thermal monitoring enabled (TM1) [ 1.442106] CPU 2 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8 [ 1.442159] CPU2: Intel(R) Xeon(R) CPU X5650 @ 2.67GHz stepping 02 [ 1.571368] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 1.610109] Booting processor 3 APIC 0x10 ip 0x6000 [ 1.635355] Initializing CPU#3 [ 1.782092] CPU: Physical Processor ID: 0 [ 1.782093] CPU: Processor Core ID: 8 [ 1.782095] CPU: L1 I cache: 32K, L1 D cache: 32K [ 1.782097] CPU: L2 cache: 256K [ 1.782098] CPU: L3 cache: 12288K [ 1.782099] CPU 3/0x10 -> Node 0 [ 1.782110] CPU3: Thermal monitoring enabled (TM1) [ 1.782113] CPU 3 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8 [ 1.782182] CPU3: Intel(R) Xeon(R) CPU X5650 @ 2.67GHz stepping 02 [ 1.910783] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 1.949526] Booting processor 4 APIC 0x12 ip 0x6000 [ 1.974723] Initializing CPU#4 [ 2.122099] CPU: Physical Processor ID: 0 [ 2.122100] CPU: Processor Core ID: 9 [ 2.122102] CPU: L1 I cache: 32K, L1 D cache: 32K [ 2.122103] CPU: L2 cache: 256K [ 2.122104] CPU: L3 cache: 12288K [ 2.122106] CPU 4/0x12 -> Node 0 [ 2.122116] CPU4: Thermal monitoring enabled (TM1) [ 2.122119] CPU 4 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8 [ 2.122226] CPU4: Intel(R) Xeon(R) CPU X5650 @ 2.67GHz stepping 02 [ 2.250850] checking TSC synchronization [CPU#0 -> CPU#4]: passed. [ 2.290424] Booting processor 5 APIC 0x14 ip 0x6000 [ 2.315621] Initializing CPU#5 [ 2.462105] CPU: Physical Processor ID: 0 [ 2.462106] CPU: Processor Core ID: 10 [ 2.462108] CPU: L1 I cache: 32K, L1 D cache: 32K [ 2.462109] CPU: L2 cache: 256K [ 2.462110] CPU: L3 cache: 12288K [ 2.462112] CPU 5/0x14 -> Node 0 [ 2.462122] CPU5: Thermal monitoring enabled (TM1) [ 2.462125] CPU 5 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8 [ 2.462156] CPU5: Intel(R) Xeon(R) CPU X5650 @ 2.67GHz stepping 02 [ 2.591955] checking TSC synchronization [CPU#0 -> CPU#5]: passed. [ 2.630710] Booting processor 6 APIC 0x20 ip 0x6000 [ 2.655943] Initializing CPU#6 [ 2.802112] CPU: Physical Processor ID: 1 [ 2.802114] CPU: Processor Core ID: 0 [ 2.802116] CPU: L1 I cache: 32K, L1 D cache: 32K [ 2.802117] CPU: L2 cache: 256K [ 2.802118] CPU: L3 cache: 12288K [ 2.802120] CPU 6/0x20 -> Node 1 [ 2.802133] CPU6: Thermal monitoring enabled (TM1) [ 2.802136] CPU 6 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 CMCI:8 [ 2.802227] CPU6: Intel(R) Xeon(R) CPU X5650 @ 2.67GHz stepping 02 [ 2.931373] checking TSC synchronization [CPU#0 -> CPU#6]: passed. [ 2.970096] Booting processor 7 APIC 0x22 ip 0x6000 [ 2.995335] Initializing CPU#7 [ 3.142120] CPU: Physical Processor ID: 1 [ 3.142122] CPU: Processor Core ID: 1 [ 3.142124] CPU: L1 I cache: 32K, L1 D cache: 32K [ 3.142126] CPU: L2 cache: 256K [ 3.142127] CPU: L3 cache: 12288K [ 3.142129] CPU 7/0x22 -> Node 1 [ 3.142142] CPU7: Thermal monitoring enabled (TM1) [ 3.142145] CPU 7 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8 [ 3.142159] CPU7: Intel(R) Xeon(R) CPU X5650 @ 2.67GHz stepping 02 [ 3.270761] checking TSC synchronization [CPU#0 -> CPU#7]: passed. [ 3.310266] Booting processor 8 APIC 0x24 ip 0x6000 [ 3.335504] Initializing CPU#8 [ 3.482127] CPU: Physical Processor ID: 1 [ 3.482128] CPU: Processor Core ID: 2 [ 3.482131] CPU: L1 I cache: 32K, L1 D cache: 32K [ 3.482132] CPU: L2 cache: 256K [ 3.482133] CPU: L3 cache: 12288K [ 3.482135] CPU 8/0x24 -> Node 1 [ 3.482148] CPU8: Thermal monitoring enabled (TM1) [ 3.482151] CPU 8 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8 [ 3.482188] CPU8: Intel(R) Xeon(R) CPU X5650 @ 2.67GHz stepping 02 [ 3.612623] checking TSC synchronization [CPU#0 -> CPU#8]: passed. [ 3.651341] Booting processor 9 APIC 0x30 ip 0x6000 [ 3.676585] Initializing CPU#9 [ 3.822134] CPU: Physical Processor ID: 1 [ 3.822135] CPU: Processor Core ID: 8 [ 3.822137] CPU: L1 I cache: 32K, L1 D cache: 32K [ 3.822139] CPU: L2 cache: 256K [ 3.822140] CPU: L3 cache: 12288K [ 3.822142] CPU 9/0x30 -> Node 1 [ 3.822154] CPU9: Thermal monitoring enabled (TM1) [ 3.822157] CPU 9 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8 [ 3.822263] CPU9: Intel(R) Xeon(R) CPU X5650 @ 2.67GHz stepping 02 [ 3.950895] checking TSC synchronization [CPU#0 -> CPU#9]: passed. [ 3.989616] Booting processor 10 APIC 0x32 ip 0x6000 [ 4.015067] Initializing CPU#10 [ 4.162140] CPU: Physical Processor ID: 1 [ 4.162142] CPU: Processor Core ID: 9 [ 4.162144] CPU: L1 I cache: 32K, L1 D cache: 32K [ 4.162145] CPU: L2 cache: 256K [ 4.162146] CPU: L3 cache: 12288K [ 4.162148] CPU 10/0x32 -> Node 1 [ 4.162160] CPU10: Thermal monitoring enabled (TM1) [ 4.162163] CPU 10 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8 [ 4.162193] CPU10: Intel(R) Xeon(R) CPU X5650 @ 2.67GHz stepping 02 [ 4.292157] checking TSC synchronization [CPU#0 -> CPU#10]: passed. [ 4.331975] Booting processor 11 APIC 0x34 ip 0x6000 [ 4.357421] Initializing CPU#11 [ 4.502147] CPU: Physical Processor ID: 1 [ 4.502148] CPU: Processor Core ID: 10 [ 4.502151] CPU: L1 I cache: 32K, L1 D cache: 32K [ 4.502152] CPU: L2 cache: 256K [ 4.502153] CPU: L3 cache: 12288K [ 4.502155] CPU 11/0x34 -> Node 1 [ 4.502167] CPU11: Thermal monitoring enabled (TM1) [ 4.502170] CPU 11 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8 [ 4.502256] CPU11: Intel(R) Xeon(R) CPU X5650 @ 2.67GHz stepping 02 [ 4.633186] checking TSC synchronization [CPU#0 -> CPU#11]: passed. [ 4.672119] Brought up 12 CPUs [ 4.681339] Total of 12 processors activated (64001.30 BogoMIPS). [ 4.706578] devtmpfs: initialized [ 4.716876] regulator: core version 0.5 [ 4.728446] Time: 5:20:28 Date: 05/05/11 [ 4.740813] NET: Registered protocol family 16 [ 4.754275] ACPI: bus type pci registered [ 4.766400] PCI: Using configuration type 1 for base access [ 4.783996] bio: create slab <bio-0> at 0 [ 4.799128] ACPI Warning for \_SB_._OSC: Return type mismatch - found Integer, expected Buffer (20090903/nspredef-1006) [ 4.833092] ACPI: Executed 1 blocks of module-level executable AML code [ 4.860361] ACPI: Interpreter enabled [ 4.871406] ACPI: (supports S0 S1 S4 S5) [ 4.883520] ACPI: Using IOAPIC for interrupt routing [ 4.908162] ACPI Warning: Incorrect checksum in table [OEMB] - EC, should be E9 (20090903/tbutils-314) [ 4.936524] ACPI: No dock devices found. [ 4.948474] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 4.962969] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 4.981285] pci 0000:00:00.0: PME# disabled [ 4.993923] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 5.012254] pci 0000:00:01.0: PME# disabled [ 5.024915] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 5.043246] pci 0000:00:02.0: PME# disabled [ 5.055906] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 5.075150] pci 0000:00:03.0: PME# disabled [ 5.087814] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 5.106142] pci 0000:00:07.0: PME# disabled [ 5.118803] pci 0000:00:08.0: PME# supported from D0 D3hot D3cold [ 5.137135] pci 0000:00:08.0: PME# disabled [ 5.149795] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 5.168128] pci 0000:00:09.0: PME# disabled [ 5.180789] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 5.199121] pci 0000:00:0a.0: PME# disabled [ 5.212657] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 5.230973] pci 0000:00:1a.7: PME# disabled [ 5.243652] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 5.261966] pci 0000:00:1b.0: PME# disabled [ 5.274628] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 5.292960] pci 0000:00:1c.0: PME# disabled [ 5.305625] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 5.323951] pci 0000:00:1c.4: PME# disabled [ 5.337474] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 5.355802] pci 0000:00:1c.5: PME# disabled [ 5.368737] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 5.387058] pci 0000:00:1d.7: PME# disabled [ 5.399777] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO [ 5.422808] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO [ 5.443480] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 0003) [ 5.466256] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0294 (mask 0003) [ 5.489605] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 5.507938] pci 0000:03:00.0: PME# disabled [ 5.520766] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 5.539087] pci 0000:02:00.0: PME# disabled [ 5.551828] pci 0000:01:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 5.571714] pci 0000:01:01.0: PME# disabled [ 5.585143] pci 0000:00:1e.0: transparent bridge [ 5.636763] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15) [ 5.658367] ACPI: PCI Interrupt Link [LNKB] (IRQs *5) [ 5.673888] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 *7 10 11 12 14 15) [ 5.695494] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 *10 11 12 14 15) [ 5.717105] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled. [ 5.742273] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 14 *15) [ 5.763879] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 *14 15) [ 5.785485] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 *11 12 14 15) [ 5.807081] vgaarb: device added: PCI:0000:01:01.0,decodes=io+mem,owns=io+mem,locks=none [ 5.831410] vgaarb: loaded [ 5.840403] SCSI subsystem initialized [ 5.852025] usbcore: registered new interface driver usbfs [ 5.868546] usbcore: registered new interface driver hub [ 5.884558] usbcore: registered new device driver usb [ 5.899855] PCI: Using ACPI for IRQ routing [ 5.912620] NetLabel: Initializing [ 5.922882] NetLabel: domain hash size = 128 [ 5.936013] NetLabel: protocols = UNLABELED CIPSOv4 [ 5.950969] NetLabel: unlabeled traffic allowed by default [ 6.012194] Switching to clocksource tsc [ 6.025806] pnp: PnP ACPI init [ 6.035040] ACPI: bus type pnp registered [ 6.050579] pnp: PnP ACPI: found 16 devices [ 6.063184] ACPI: ACPI bus type pnp unregistered [ 6.077101] system 00:01: iomem range 0xfbf00000-0xfbffffff has been reserved [ 6.099455] system 00:01: iomem range 0xfc000000-0xfcffffff has been reserved [ 6.120907] system 00:01: iomem range 0xfd000000-0xfdffffff has been reserved [ 6.142356] system 00:01: iomem range 0xfe000000-0xfebfffff has been reserved [ 6.163808] system 00:01: iomem range 0xfec8a000-0xfec8afff could not be reserved [ 6.186325] system 00:01: iomem range 0xfed10000-0xfed10fff has been reserved [ 6.207778] system 00:06: ioport range 0x290-0x29f has been reserved [ 6.226888] system 00:07: ioport range 0x4d0-0x4d1 has been reserved [ 6.245997] system 00:07: ioport range 0xca0-0xcaf has been reserved [ 6.265106] system 00:07: ioport range 0x800-0x87f has been reserved [ 6.284219] system 00:07: ioport range 0x500-0x57f could not be reserved [ 6.304367] system 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 6.325819] system 00:07: iomem range 0xfed20000-0xfed3ffff has been reserved [ 6.347270] system 00:07: iomem range 0xfed40000-0xfed8ffff has been reserved [ 6.369503] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved [ 6.392017] system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved [ 6.413469] system 00:0e: iomem range 0xe0000000-0xefffffff has been reserved [ 6.434921] system 00:0f: iomem range 0x0-0x9ffff could not be reserved [ 6.454809] system 00:0f: iomem range 0xc0000-0xcffff has been reserved [ 6.474700] system 00:0f: iomem range 0xe0000-0xfffff could not be reserved [ 6.495631] system 00:0f: iomem range 0x100000-0xbfffffff could not be reserved [ 6.517628] system 00:0f: iomem range 0xfed90000-0xffffffff could not be reserved [ 6.544880] pci 0000:00:01.0: PCI bridge, secondary bus 0000:0b [ 6.562687] pci 0000:00:01.0: IO window: disabled [ 6.577380] pci 0000:00:01.0: MEM window: disabled [ 6.592328] pci 0000:00:01.0: PREFETCH window: disabled [ 6.609386] pci 0000:00:02.0: PCI bridge, secondary bus 0000:0a [ 6.627196] pci 0000:00:02.0: IO window: disabled [ 6.641886] pci 0000:00:02.0: MEM window: disabled [ 6.656837] pci 0000:00:02.0: PREFETCH window: disabled [ 6.673089] pci 0000:00:03.0: PCI bridge, secondary bus 0000:09 [ 6.690897] pci 0000:00:03.0: IO window: disabled [ 6.705589] pci 0000:00:03.0: MEM window: disabled [ 6.720540] pci 0000:00:03.0: PREFETCH window: disabled [ 6.736792] pci 0000:00:07.0: PCI bridge, secondary bus 0000:08 [ 6.754598] pci 0000:00:07.0: IO window: disabled [ 6.769293] pci 0000:00:07.0: MEM window: disabled [ 6.784240] pci 0000:00:07.0: PREFETCH window: disabled [ 6.800495] pci 0000:00:08.0: PCI bridge, secondary bus 0000:07 [ 6.818301] pci 0000:00:08.0: IO window: disabled [ 6.832994] pci 0000:00:08.0: MEM window: disabled [ 6.847943] pci 0000:00:08.0: PREFETCH window: disabled [ 6.864873] pci 0000:00:09.0: PCI bridge, secondary bus 0000:06 [ 6.882680] pci 0000:00:09.0: IO window: disabled [ 6.898281] pci 0000:00:09.0: MEM window: disabled [ 6.913231] pci 0000:00:09.0: PREFETCH window: disabled [ 6.929485] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:05 [ 6.947291] pci 0000:00:0a.0: IO window: disabled [ 6.961984] pci 0000:00:0a.0: MEM window: disabled [ 6.976934] pci 0000:00:0a.0: PREFETCH window: disabled [ 6.993188] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04 [ 7.010995] pci 0000:00:1c.0: IO window: 0x1000-0x1fff [ 7.026988] pci 0000:00:1c.0: MEM window: 0xc0000000-0xc01fffff [ 7.045317] pci 0000:00:1c.0: PREFETCH window: 0x000000c0200000-0x000000c03fffff [ 7.068098] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03 [ 7.085905] pci 0000:00:1c.4: IO window: 0xe000-0xefff [ 7.101896] pci 0000:00:1c.4: MEM window: 0xfbe00000-0xfbefffff [ 7.121138] pci 0000:00:1c.4: PREFETCH window: 0x000000c0400000-0x000000c05fffff [ 7.143915] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:02 [ 7.161723] pci 0000:00:1c.5: IO window: 0xd000-0xdfff [ 7.177715] pci 0000:00:1c.5: MEM window: 0xfbd00000-0xfbdfffff [ 7.196045] pci 0000:00:1c.5: PREFETCH window: 0x000000c0600000-0x000000c07fffff [ 7.218823] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01 [ 7.236630] pci 0000:00:1e.0: IO window: 0xc000-0xcfff [ 7.252622] pci 0000:00:1e.0: MEM window: 0xfaf00000-0xfb7fffff [ 7.270953] pci 0000:00:1e.0: PREFETCH window: disabled [ 7.287257] pci 0000:00:1c.0: enabling device (0104 -> 0107) [ 7.304293] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 7.324445] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 7.344601] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 7.364803] NET: Registered protocol family 2 [ 7.379035] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 7.402427] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 7.426387] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 7.446711] TCP: Hash tables configured (established 524288 bind 65536) [ 7.466610] TCP reno registered [ 7.476223] NET: Registered protocol family 1 [ 7.490116] Scanning for low memory corruption every 60 seconds [ 7.508033] audit: initializing netlink socket (disabled) [ 7.524292] type=2000 audit(1304572824.310:1): initialized [ 7.547286] I-pipe: Domain Xenomai registered. [ 7.560860] Xenomai: hal/x86_64 started. [ 7.572692] Xenomai: scheduling class idle registered. [ 7.588163] Xenomai: scheduling class rt registered. [ 7.603997] Xenomai: real-time nucleus v2.5.5.2 (Ghosts) loaded. [ 7.622256] Xenomai: SMI-enabled chipset found, but SMI workaround disabled [ 7.622257] (check CONFIG_XENO_HW_SMI_WORKAROUND). You may encounter [ 7.622258] high interrupt latencies! [ 7.678156] Xenomai: starting native API services. [ 7.692584] Xenomai: starting POSIX services. [ 7.705734] Xenomai: starting RTDM services. [ 7.719281] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 7.739692] VFS: Disk quotas dquot_6.5.2 [ 7.751541] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 7.771396] fuse init (API version 7.13) [ 7.783286] msgmni has been set to 24058 [ 7.795630] alg: No test for stdrng (krng) [ 7.808037] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 7.830313] io scheduler noop registered [ 7.842139] io scheduler anticipatory registered [ 7.856024] io scheduler deadline registered [ 7.868898] io scheduler cfq registered (default) [ 7.884098] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 7.900937] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 7.920915] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 7.946045] ACPI: Power Button [PWRB] [ 7.957123] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 7.979374] ACPI: Power Button [PWRF] [ 7.991221] Linux agpgart interface v0.103 [ 8.003558] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 8.022491] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 8.040637] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 8.058945] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 8.075820] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 8.093428] brd: module loaded [ 8.103001] loop: module loaded [ 8.112528] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 8.135897] ata_piix 0000:00:1f.2: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 8.157353] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 8.173298] scsi0 : ata_piix [ 8.182069] scsi1 : ata_piix [ 8.192092] ata1: SATA max UDMA/133 cmd 0xac00 ctl 0xa880 bmdma 0xa400 irq 23 [ 8.213542] ata2: SATA max UDMA/133 cmd 0xa800 ctl 0xa480 bmdma 0xa408 irq 23 [ 8.235011] ata_piix 0000:00:1f.5: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 8.256467] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 8.272399] scsi2 : ata_piix [ 8.281142] scsi3 : ata_piix [ 8.291113] ata3: SATA max UDMA/133 cmd 0xbc00 ctl 0xb880 bmdma 0xb400 irq 21 [ 8.312551] ata4: SATA max UDMA/133 cmd 0xb800 ctl 0xb480 bmdma 0xb408 irq 21 [ 8.334214] Fixed MDIO Bus: probed [ 8.344501] PPP generic driver version 2.4.2 [ 8.357374] tun: Universal TUN/TAP device driver, 1.6 [ 8.372585] tun: (C) 1999-2004 Max Krasnyansky <maxk@domain.hid> [ 8.391227] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 8.410879] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 8.432355] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 8.448092] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 8.470370] ehci_hcd 0000:00:1a.7: debug port 1 [ 8.487907] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfbcf9000 [ 8.535314] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 8.552680] usb usb1: configuration #1 chosen from 1 choice [ 8.569463] hub 1-0:1.0: USB hub found [ 8.580754] hub 1-0:1.0: 4 ports detected [ 8.592892] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 8.614363] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 8.630096] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 8.652374] ehci_hcd 0000:00:1d.7: debug port 1 [ 8.669883] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbcfa000 [ 8.684998] ata3: SATA link down (SStatus 0 SControl 300) [ 8.724046] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 8.741375] usb usb2: configuration #1 chosen from 1 choice [ 8.758148] hub 2-0:1.0: USB hub found [ 8.769440] hub 2-0:1.0: 8 ports detected [ 8.781577] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 8.800184] uhci_hcd: USB Universal Host Controller Interface driver [ 8.819304] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 8.840769] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 8.844090] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 8.875126] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 8.876327] ata4.00: ATA-7: SQF-S25M4-16G, VER2.A13, max UDMA/133 [ 8.876331] ata4.00: 30080736 sectors, multi 0: LBA48 [ 8.915202] ata4.00: configured for UDMA/133 [ 8.954770] ata2.00: SATA link down (SStatus 0 SControl 300) [ 8.964060] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00009400 [ 8.964155] usb usb3: configuration #1 chosen from 1 choice [ 8.964178] hub 3-0:1.0: USB hub found [ 8.964183] hub 3-0:1.0: 2 ports detected [ 8.964222] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 8.964230] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 8.964255] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 8.964285] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00009480 [ 8.964349] usb usb4: configuration #1 chosen from 1 choice [ 8.964368] hub 4-0:1.0: USB hub found [ 8.964372] hub 4-0:1.0: 2 ports detected [ 8.964407] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 8.964414] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 8.964435] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 8.964461] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00009800 [ 8.964525] usb usb5: configuration #1 chosen from 1 choice [ 8.964541] hub 5-0:1.0: USB hub found [ 8.964545] hub 5-0:1.0: 2 ports detected [ 8.964585] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 8.964593] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 8.964615] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 8.964646] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00009880 [ 8.964715] usb usb6: configuration #1 chosen from 1 choice [ 8.964731] hub 6-0:1.0: USB hub found [ 8.964735] hub 6-0:1.0: 2 ports detected [ 8.964770] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 8.964777] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 8.964798] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 8.964824] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009c00 [ 8.964893] usb usb7: configuration #1 chosen from 1 choice [ 8.964908] hub 7-0:1.0: USB hub found [ 8.964912] hub 7-0:1.0: 2 ports detected [ 8.964947] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 8.964958] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 8.964982] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8 [ 8.965007] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000a000 [ 8.965066] usb usb8: configuration #1 chosen from 1 choice [ 8.965087] hub 8-0:1.0: USB hub found [ 8.965091] hub 8-0:1.0: 2 ports detected [ 8.965159] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 8.968210] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 8.968214] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 8.968273] mice: PS/2 mouse device common for all mice [ 8.968350] rtc_cmos 00:03: RTC can wake from S4 [ 8.968375] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 8.968402] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 8.968505] device-mapper: uevent: version 1.0.3 [ 8.968596] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@domain.hid[ 8.968828] device-mapper: multipath: version 1.1.0 loaded [ 8.968830] device-mapper: multipath round-robin: version 1.0.0 loaded [ 8.968896] cpuidle: using governor ladder [ 8.968898] cpuidle: using governor menu [ 8.969164] TCP cubic registered [ 8.969269] NET: Registered protocol family 10 [ 8.969691] lo: Disabled Privacy Extensions [ 8.969872] NET: Registered protocol family 17 [ 8.969951] registered taskstats version 1 [ 8.970679] Magic number: 11:167:314 [ 8.990758] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 9.094089] ata1.00: SATA link down (SStatus 0 SControl 300) [ 9.094104] ata1.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 9.114562] ata1.01: ATA-8: ST31000524NS, SN11, max UDMA/133 [ 9.114564] ata1.01: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 9.154566] ata1.01: configured for UDMA/133 [ 9.154658] scsi 0:0:1:0: Direct-Access ATA ST31000524NS SN11 PQ: 0 ANSI: 5 [ 9.154759] sd 0:0:1:0: Attached scsi generic sg0 type 0 [ 9.154828] sd 0:0:1:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 9.154858] sd 0:0:1:0: [sda] Write Protect is off [ 9.154875] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 10.125101] rtc_cmos 00:03: setting system clock to 2011-05-05 05:20:32 UTC (1304572832) [ 10.125122] ata2.01: SATA link down (SStatus 0 SControl 300) [ 10.125207] scsi 3:0:0:0: Direct-Access ATA SQF-S25M4-16G VER2 PQ: 0 ANSI: 5 [ 10.125283] sd 3:0:0:0: Attached scsi generic sg1 type 0 [ 10.125324] sd 3:0:0:0: [sdb] 30080736 512-byte logical blocks: (15.4 GB/14.3 GiB) [ 10.125353] sd 3:0:0:0: [sdb] Write Protect is off [ 10.125370] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 10.271150] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 10.289217] EDD information not available. [ 10.301718] sda: [ 10.307096] sdb: sda1 sda2 < sdb1 [ 10.318631] sd 3:0:0:0: [sdb] Attached SCSI disk [ 10.336230] sda5 > [ 10.342922] sd 0:0:1:0: [sda] Attached SCSI disk [ 10.356843] md: Waiting for all devices to be available before autodetect [ 10.377259] md: If you don't use raid, use raid=noautodetect [ 10.394392] md: Autodetecting RAID arrays. [ 10.406743] md: Scanned 0 and added 0 devices. [ 10.420130] md: autorun ... [ 10.428556] md: ... autorun DONE. [ 10.461397] EXT3-fs: sda1: couldn't mount because of unsupported optional features (240). [ 10.486509] EXT2-fs: sda1: couldn't mount because of unsupported optional features (240). [ 10.604006] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 10.623515] VFS: Mounted root (ext4 filesystem) readonly on device 8:1. [ 10.661763] devtmpfs: mounted [ 10.670742] Freeing unused kernel memory: 860k freed [ 10.685824] Write protecting the kernel read-only data: 7512k [ 16.860358] ioatdma 0000:00:16.0: channel error register unreachable [ 16.879490] ioatdma 0000:00:16.0: channel enumeration error [ 16.896315] ioatdma 0000:00:16.0: Intel(R) I/OAT DMA Engine init failed [ 16.916342] ioatdma 0000:00:16.1: channel error register unreachable [ 16.935511] ioatdma 0000:00:16.1: channel enumeration error [ 16.952321] ioatdma 0000:00:16.1: Intel(R) I/OAT DMA Engine init failed [ 16.972318] ioatdma 0000:00:16.2: channel error register unreachable [ 16.991482] ioatdma 0000:00:16.2: channel enumeration error [ 17.008303] ioatdma 0000:00:16.2: Intel(R) I/OAT DMA Engine init failed [ 17.028297] ioatdma 0000:00:16.3: channel error register unreachable [ 17.047417] ioatdma 0000:00:16.3: channel enumeration error [ 17.064236] ioatdma 0000:00:16.3: Intel(R) I/OAT DMA Engine init failed [ 17.084233] ioatdma 0000:00:16.4: channel error register unreachable [ 17.103390] ioatdma 0000:00:16.4: channel enumeration error [ 17.120212] ioatdma 0000:00:16.4: Intel(R) I/OAT DMA Engine init failed [ 17.140198] ioatdma 0000:00:16.5: channel error register unreachable [ 17.159369] ioatdma 0000:00:16.5: channel enumeration error [ 17.176188] ioatdma 0000:00:16.5: Intel(R) I/OAT DMA Engine init failed [ 17.196177] ioatdma 0000:00:16.6: channel error register unreachable [ 17.215348] ioatdma 0000:00:16.6: channel enumeration error [ 17.232170] ioatdma 0000:00:16.6: Intel(R) I/OAT DMA Engine init failed [ 17.252157] ioatdma 0000:00:16.7: channel error register unreachable [ 17.271333] ioatdma 0000:00:16.7: channel enumeration error [ 17.288149] ioatdma 0000:00:16.7: Intel(R) I/OAT DMA Engine init failed [ 17.693112] hda-intel: no codecs found! [ 51.470109] BUG: unable to handle kernel NULL pointer dereference at 000000000000001c [ 51.493659] IP: [<ffffffff81025a05>] __ipipe_get_ioapic_irq_vector+0x25/0x30 [ 51.514824] PGD 0 [ 51.520908] Thread overran stack, or stack corrupted [ 51.535780] Oops: 0000 [#1] SMP [ 51.545558] last sysfs file: /sys/devices/pci0000:00/0000:00:1f.5/host3/target3:0:0/3:0:0:0/block/sdb/uevent [ 51.574990] CPU 0 [ 51.581073] Modules linked in: binfmt_misc ppdev dm_crypt snd_hda_intel snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy snd_seq_oss snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device snd soundcore psmouse e1000e snd_page_alloc ioatdma dca serio_raw lp parport [ 51.664227] Pid: 0, comm: swapper Not tainted 2.6.32.20-adeos #1 System Product Name [ 51.687418] RIP: 0010:[<ffffffff81025a05>] [<ffffffff81025a05>] __ipipe_get_ioapic_irq_vector+0x25/0x30 [ 51.715864] RSP: 0000:ffff88002da03eb8 EFLAGS: 00010046 [ 51.731775] RAX: 0000000000000000 RBX: ffffffff81988740 RCX: 0000000000000800 [ 51.753147] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000020 [ 51.774520] RBP: ffff88002da03eb8 R08: 0000000000000004 R09: ffff88002da0ed60 [ 51.795893] R10: ffff88002da0ed50 R11: ffff88002da0ed48 R12: 0000000000000000 [ 51.817266] R13: 0000000000000000 R14: 000000000000ed40 R15: ffff88002da0cf00 [ 51.838639] FS: 0000000000000000(0000) GS:ffff88002da00000(0000) knlGS:0000000000000000 [ 51.862871] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b [ 51.880084] CR2: 000000000000001c CR3: 0000000001001000 CR4: 00000000000006f0 [ 51.901457] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 51.922830] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 51.944203] Process swapper (pid: 0, threadinfo ffffffff81760000, task ffffffff81767600) [ 51.968434] Stack: [ 51.974468] ffff88002da03f28 ffffffff810b98c6 ffffffff81988740 ffffffff810271d0 [ 51.996257] <0> 000000000000cf00 0000000000032f60 000000000000ed40 ffffffff81988748 [ 52.019448] <0> ffff88033847d300 ffffffff81988740 ffffffff81988740 0000000000000015 [ 52.043188] Call Trace: [ 52.050522] <IRQ> [ 52.056865] [<ffffffff810b98c6>] __ipipe_sync_stage+0x206/0x25c [ 52.074859] [<ffffffff810271d0>] ? smp_irq_move_cleanup_interrupt+0x0/0x130 [ 52.095971] [<ffffffff810b9da0>] __ipipe_walk_pipeline+0x100/0x110 [ 52.114744] [<ffffffff8102b614>] __ipipe_handle_irq+0x134/0x320 [ 52.132737] [<ffffffff810b34c0>] ? __ipipe_ack_fasteoi_irq+0x0/0x20 [ 52.151772] [<ffffffff8100cb13>] common_interrupt+0x13/0x2c [ 52.168720] <EOI> [ 52.175065] [<ffffffff8102b9cb>] ? __ipipe_halt_root+0x2b/0x40 [ 52.192799] [<ffffffff8101445d>] ? default_idle+0x3d/0x90 [ 52.209231] [<ffffffff8100aeb4>] ? cpu_idle+0xc4/0x120 [ 52.224885] [<ffffffff815386ab>] ? rest_init+0x6b/0x80 [ 52.240538] [<ffffffff81819d8a>] ? start_kernel+0x43a/0x446 [ 52.257489] [<ffffffff81819315>] ? x86_64_start_reservations+0x125/0x129 [ 52.277822] [<ffffffff818193fd>] ? x86_64_start_kernel+0xe4/0xeb [ 52.296073] Code: 42 48 c9 c3 66 90 55 48 89 e5 0f 1f 44 00 00 8d 87 00 ef ff ff 83 f8 1f 77 0c 8d 87 ea ef ff ff c9 c3 0f 1f 40 00 e8 bb ff ff ff <0f> b6 40 1c c9 c3 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41 55 [ 52.355744] RIP [<ffffffff81025a05>] __ipipe_get_ioapic_irq_vector+0x25/0x30 [ 52.377170] RSP <ffff88002da03eb8> [ 52.387625] CR2: 000000000000001c [ 52.397559] ---[ end trace fe2daa7b4f437364 ]--- [ 52.411388] Kernel panic - not syncing: Attempted to kill the idle task! [ 52.431460] Pid: 0, comm: swapper Tainted: G D 2.6.32.20-adeos #1 [ 52.451795] Call Trace: [ 52.459125] <IRQ> [<ffffffff81549b9e>] panic+0x78/0x134 [ 52.475352] [<ffffffff81058640>] do_exit+0x760/0x850 [ 52.490485] [<ffffffff8154e3b2>] oops_end+0xb2/0x100 [ 52.505617] [<ffffffff81030d82>] no_context+0xf2/0x260 [ 52.521268] [<ffffffff81031015>] __bad_area_nosemaphore+0x125/0x1e0 [ 52.540302] [<ffffffff8139d095>] ? scsi_softirq_done+0x145/0x170 [ 52.558553] [<ffffffff810310e3>] bad_area_nosemaphore+0x13/0x20 [ 52.576546] [<ffffffff8154fecb>] do_page_fault+0x2eb/0x3c0 [ 52.593240] [<ffffffff8102bde0>] __ipipe_handle_exception+0x140/0x3d0 [ 52.612791] [<ffffffff8154d686>] page_fault+0x26/0x70 [ 52.628184] [<ffffffff81025a05>] ? __ipipe_get_ioapic_irq_vector+0x25/0x30 [ 52.649037] [<ffffffff81025a05>] ? __ipipe_get_ioapic_irq_vector+0x25/0x30 [ 52.669889] [<ffffffff810b98c6>] __ipipe_sync_stage+0x206/0x25c [ 52.687884] [<ffffffff810271d0>] ? smp_irq_move_cleanup_interrupt+0x0/0x130 [ 52.708994] [<ffffffff810b9da0>] __ipipe_walk_pipeline+0x100/0x110 [ 52.727767] [<ffffffff8102b614>] __ipipe_handle_irq+0x134/0x320 [ 52.745761] [<ffffffff810b34c0>] ? __ipipe_ack_fasteoi_irq+0x0/0x20 [ 52.764795] [<ffffffff8100cb13>] common_interrupt+0x13/0x2c [ 52.781744] <EOI> [<ffffffff8102b9cb>] ? __ipipe_halt_root+0x2b/0x40 [ 52.801351] [<ffffffff8101445d>] ? default_idle+0x3d/0x90 [ 52.817782] [<ffffffff8100aeb4>] ? cpu_idle+0xc4/0x120 [ 52.833435] [<ffffffff815386ab>] ? rest_init+0x6b/0x80 [ 52.849087] [<ffffffff81819d8a>] ? start_kernel+0x43a/0x446 [ 52.866041] [<ffffffff81819315>] ? x86_64_start_reservations+0x125/0x129 [ 52.886374] [<ffffffff818193fd>] ? x86_64_start_kernel+0xe4/0xeb
Does somebody know what is wrong?

regards,
     franz




--- Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org> schrieb am Di, 3.5.2011:

Von: Gilles Chanteperdrix <gilles.chanteperdrix@domain.hid>
Betreff: Re: [Xenomai-help] Problem with the configuration of new system
An: "Franz Engel" <franz_lambert_engel@domain.hidahoo.de>
CC: xenomai@xenomai.org
Datum: Dienstag, 3. Mai, 2011 19:50 Uhr

On 05/03/2011 07:45 PM, Franz Engel wrote:
> Hello,
>
> I've a problem with my new system. I already patched the system with
> adeos and also with the preperation skript of Xenomai. For the first
> configuration I use a kernel-configuration where xenomai is disabled
> and only ipipe is enabled. Even when I start the system it boots
> correct and it runs a few seconds (long enough to recognize the
> network), then the system freezs and two leds of the keyboard begins
> blinking.

This is a kernel oops. Please send us the kernel logs.

--
                                                                Gilles.