From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <216508.85461.qm@domain.hid> Date: Thu, 5 May 2011 06:30:43 +0100 (BST) From: Franz Engel In-Reply-To: <4DC0406C.7060402@domain.hid> MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="0-474610793-1304573443=:85461" Subject: Re: [Xenomai-help] Problem with the configuration of new system List-Id: Help regarding installation and common use of Xenomai List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: Gilles Chanteperdrix Cc: xenomai@xenomai.org --0-474610793-1304573443=:85461 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: quoted-printable Hi, After some days to learn how I receive logs on another PC, here is my log. = The problem is that the PC hangs after a few seconds.=20 =0A=0A=0A=09=0A=09=0A=09=0A=09pre { font-family: "Liberation Serif"; }p { m= argin-bottom: 0.21cm; }=0A=0A#[?25l#[H#[J#[2;25HGNU GRUB version 1.98-1ubu= ntu10 =0A=0A[ 0.000000] Linux version 2.6.32.20-adeos (root@domain.hid) (g= cc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #1 SMP Wed May 4 22:06:49 CEST 2= 011=0A[ 0.000000] Command line: BOOT_IMAGE=3D/boot/vmlinuz-2.6.32.20-ade= os root=3D/dev/sda1 ro console=3DttyS0, 38400 console=3Dtty0=0A[ 0.00000= 0] KERNEL supported cpus:=0A[ 0.000000] Intel GenuineIntel=0A[ 0.00= 0000] AMD AuthenticAMD=0A[ 0.000000] Centaur CentaurHauls=0A[ 0.0= 00000] BIOS-provided physical RAM map:=0A[ 0.000000] BIOS-e820: 0000000= 000000000 - 000000000009fc00 (usable)=0A[ 0.000000] BIOS-e820: 00000000= 0009fc00 - 00000000000a0000 (reserved)=0A[ 0.000000] BIOS-e820: 0000000= 0000e5000 - 0000000000100000 (reserved)=0A[ 0.000000] BIOS-e820: 000000= 0000100000 - 00000000bf780000 (usable)=0A[ 0.000000] BIOS-e820: 0000000= 0bf78e000 - 00000000bf790000 (reserved)=0A[ 0.000000] BIOS-e820: 000000= 00bf790000 - 00000000bf79e000 (ACPI data)=0A[ 0.000000] BIOS-e820: 0000= 0000bf79e000 - 00000000bf7d0000 (ACPI NVS)=0A[ 0.000000] BIOS-e820: 000= 00000bf7d0000 - 00000000bf7e0000 (reserved)=0A[ 0.000000] BIOS-e820: 00= 000000bf7ed000 - 00000000c0000000 (reserved)=0A[ 0.000000] BIOS-e820: 0= 0000000e0000000 - 00000000f0000000 (reserved)=0A[ 0.000000] BIOS-e820: = 00000000fee00000 - 00000000fee01000 (reserved)=0A[ 0.000000] BIOS-e820:= 00000000ffe00000 - 0000000100000000 (reserved)=0A[ 0.000000] BIOS-e820= : 0000000100000000 - 0000000340000000 (usable)=0A[ 0.000000] DMI present= .=0A[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working aro= und it.=0A[ 0.000000] last_pfn =3D 0x340000 max_arch_pfn =3D 0x400000000= =0A[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x701060= 0070106=0A[ 0.000000] last_pfn =3D 0xbf780 max_arch_pfn =3D 0x400000000= =0A[ 0.000000] Scanning 0 areas for low memory corruption=0A[ 0.00000= 0] modified physical RAM map:=0A[ 0.000000] modified: 0000000000000000 = - 0000000000010000 (reserved)=0A[ 0.000000] modified: 0000000000010000 = - 000000000009fc00 (usable)=0A[ 0.000000] modified: 000000000009fc00 - = 00000000000a0000 (reserved)=0A[ 0.000000] modified: 00000000000e5000 - = 0000000000100000 (reserved)=0A[ 0.000000] modified: 0000000000100000 - = 00000000bf780000 (usable)=0A[ 0.000000] modified: 00000000bf78e000 - 00= 000000bf790000 (reserved)=0A[ 0.000000] modified: 00000000bf790000 - 00= 000000bf79e000 (ACPI data)=0A[ 0.000000] modified: 00000000bf79e000 - 0= 0000000bf7d0000 (ACPI NVS)=0A[ 0.000000] modified: 00000000bf7d0000 - 0= 0000000bf7e0000 (reserved)=0A[ 0.000000] modified: 00000000bf7ed000 - 0= 0000000c0000000 (reserved)=0A[ 0.000000] modified: 00000000e0000000 - 0= 0000000f0000000 (reserved)=0A[ 0.000000] modified: 00000000fee00000 - 0= 0000000fee01000 (reserved)=0A[ 0.000000] modified: 00000000ffe00000 - 0= 000000100000000 (reserved)=0A[ 0.000000] modified: 0000000100000000 - 0= 000000340000000 (usable)=0A[ 0.000000] Using GB pages for direct mapping= =0A[ 0.000000] init_memory_mapping: 0000000000000000-00000000bf780000=0A= [ 0.000000] init_memory_mapping: 0000000100000000-0000000340000000=0A[ = 0.000000] ACPI: RSDP 00000000000fb620 00024 (v02 ACPIAM)=0A[ 0.000000]= ACPI: XSDT 00000000bf790100 00084 (v01 062810 XSDT1507 20100628 MSFT 00000= 097)=0A[ 0.000000] ACPI: FACP 00000000bf790290 000F4 (v03 062810 FACP150= 7 20100628 MSFT 00000097)=0A[ 0.000000] ACPI: DSDT 00000000bf790540 05B3= D (v01 S0081 S0081002 00000002 INTL 20060113)=0A[ 0.000000] ACPI: FACS = 00000000bf79e000 00040=0A[ 0.000000] ACPI: APIC 00000000bf790390 0011E (= v01 062810 APIC1507 20100628 MSFT 00000097)=0A[ 0.000000] ACPI: MCFG 000= 00000bf7904b0 0003C (v01 062810 OEMMCFG 20100628 MSFT 00000097)=0A[ 0.0= 00000] ACPI: SPMI 00000000bf7904f0 00041 (v05 062810 OEMSPMI 20100628 MSFT= 00000097)=0A[ 0.000000] ACPI: OEMB 00000000bf79e040 00072 (v01 062810 O= EMB1507 20100628 MSFT 00000097)=0A[ 0.000000] ACPI: SRAT 00000000bf79854= 0 00168 (v01 062810 OEMSRAT 00000001 INTL 00000001)=0A[ 0.000000] ACPI:= HPET 00000000bf7986b0 00038 (v01 062810 OEMHPET 20100628 MSFT 00000097)= =0A[ 0.000000] ACPI: SSDT 00000000bf7a17f0 0154F (v01 DpgPmm CpuPm 00= 000012 INTL 20060113)=0A[ 0.000000] ACPI: EINJ 00000000bf7986f0 00130 (v= 01 AMIER AMI_EINJ 20100628 MSFT 00000097)=0A[ 0.000000] ACPI: BERT 0000= 0000bf798880 00030 (v01 AMIER AMI_BERT 20100628 MSFT 00000097)=0A[ 0.00= 0000] ACPI: ERST 00000000bf7988b0 001B0 (v01 AMIER AMI_ERST 20100628 MSFT = 00000097)=0A[ 0.000000] ACPI: HEST 00000000bf798a60 000A8 (v01 AMIER AB= C_HEST 20100628 MSFT 00000097)=0A[ 0.000000] SRAT: PXM 0 -> APIC 0 -> No= de 0=0A[ 0.000000] SRAT: PXM 1 -> APIC 32 -> Node 1=0A[ 0.000000] SRA= T: PXM 0 -> APIC 2 -> Node 0=0A[ 0.000000] SRAT: PXM 0 -> APIC 4 -> Node= 0=0A[ 0.000000] SRAT: PXM 0 -> APIC 16 -> Node 0=0A[ 0.000000] SRAT:= PXM 0 -> APIC 18 -> Node 0=0A[ 0.000000] SRAT: PXM 0 -> APIC 20 -> Node= 0=0A[ 0.000000] SRAT: PXM 1 -> APIC 34 -> Node 1=0A[ 0.000000] SRAT:= PXM 1 -> APIC 36 -> Node 1=0A[ 0.000000] SRAT: PXM 1 -> APIC 48 -> Node= 1=0A[ 0.000000] SRAT: PXM 1 -> APIC 50 -> Node 1=0A[ 0.000000] SRAT:= PXM 1 -> APIC 52 -> Node 1=0A[ 0.000000] SRAT: Node 0 PXM 0 0-c0000000= =0A[ 0.000000] SRAT: Node 0 PXM 0 100000000-1c0000000=0A[ 0.000000] S= RAT: Node 1 PXM 1 1c0000000-340000000=0A[ 0.000000] Bootmem setup node 0= 0000000000000000-00000001c0000000=0A[ 0.000000] NODE_DATA [0000000000= 012000 - 0000000000016fff]=0A[ 0.000000] bootmap [0000000000017000 - = 000000000004efff] pages 38=0A[ 0.000000] (6 early reservations) =3D=3D> = bootmem [0000000000 - 01c0000000]=0A[ 0.000000] #0 [0000000000 - 00000= 01000] BIOS data page =3D=3D> [0000000000 - 0000001000]=0A[ 0.000000] = #1 [0000006000 - 0000008000] TRAMPOLINE =3D=3D> [0000006000 - 00000= 08000]=0A[ 0.000000] #2 [0001000000 - 0001b35c24] TEXT DATA BSS =3D= =3D> [0001000000 - 0001b35c24]=0A[ 0.000000] #3 [000009fc00 - 00001000= 00] BIOS reserved =3D=3D> [000009fc00 - 0000100000]=0A[ 0.000000] #= 4 [0001b36000 - 0001b362c4] BRK =3D=3D> [0001b36000 - 0001b362= c4]=0A[ 0.000000] #5 [0000010000 - 0000012000] PGTABLE =3D=3D= > [0000010000 - 0000012000]=0A[ 0.000000] Bootmem setup node 1 00000001c= 0000000-0000000340000000=0A[ 0.000000] NODE_DATA [00000001c0000000 - 0= 0000001c0004fff]=0A[ 0.000000] bootmap [00000001c0005000 - 00000001c0= 034fff] pages 30=0A[ 0.000000] (6 early reservations) =3D=3D> bootmem [0= 1c0000000 - 0340000000]=0A[ 0.000000] #0 [0000000000 - 0000001000] B= IOS data page=0A[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOL= INE=0A[ 0.000000] #2 [0001000000 - 0001b35c24] TEXT DATA BSS=0A[ = 0.000000] #3 [000009fc00 - 0000100000] BIOS reserved=0A[ 0.000000]= #4 [0001b36000 - 0001b362c4] BRK=0A[ 0.000000] #5 [000= 0010000 - 0000012000] PGTABLE=0A[ 0.000000] found SMP MP-table = at [ffff8800000ff780] ff780=0A[ 0.000000] Zone PFN ranges:=0A[ 0.0000= 00] DMA 0x00000010 -> 0x00001000=0A[ 0.000000] DMA32 0x00001= 000 -> 0x00100000=0A[ 0.000000] Normal 0x00100000 -> 0x00340000=0A[ = 0.000000] Movable zone start PFN for each node=0A[ 0.000000] early_no= de_map[4] active PFN ranges=0A[ 0.000000] 0: 0x00000010 -> 0x0000009= f=0A[ 0.000000] 0: 0x00000100 -> 0x000bf780=0A[ 0.000000] 0: = 0x00100000 -> 0x001c0000=0A[ 0.000000] 1: 0x001c0000 -> 0x00340000= =0A[ 0.000000] ACPI: PM-Timer IO Port: 0x808=0A[ 0.000000] ACPI: LAPI= C (acpi_id[0x01] lapic_id[0x00] enabled)=0A[ 0.000000] ACPI: LAPIC (acpi= _id[0x02] lapic_id[0x02] enabled)=0A[ 0.000000] ACPI: LAPIC (acpi_id[0x0= 3] lapic_id[0x04] enabled)=0A[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapi= c_id[0x10] enabled)=0A[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x= 12] enabled)=0A[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x14] ena= bled)=0A[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x20] enabled)= =0A[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x22] enabled)=0A[ = 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x24] enabled)=0A[ 0.0000= 00] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x30] enabled)=0A[ 0.000000] ACP= I: LAPIC (acpi_id[0x0b] lapic_id[0x32] enabled)=0A[ 0.000000] ACPI: LAPI= C (acpi_id[0x0c] lapic_id[0x34] enabled)=0A[ 0.000000] ACPI: LAPIC (acpi= _id[0x0d] lapic_id[0x8c] disabled)=0A[ 0.000000] ACPI: LAPIC (acpi_id[0x= 0e] lapic_id[0x8d] disabled)=0A[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] la= pic_id[0x8e] disabled)=0A[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id= [0x8f] disabled)=0A[ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x90]= disabled)=0A[ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x91] disab= led)=0A[ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0x92] disabled)= =0A[ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x93] disabled)=0A[ = 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0x94] disabled)=0A[ 0.00= 0000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x95] disabled)=0A[ 0.000000] = ACPI: LAPIC (acpi_id[0x17] lapic_id[0x96] disabled)=0A[ 0.000000] ACPI: = LAPIC (acpi_id[0x18] lapic_id[0x97] disabled)=0A[ 0.000000] ACPI: LAPIC_= NMI (acpi_id[0xff] high level lint[0x1])=0A[ 0.000000] ACPI: IOAPIC (id[= 0x01] address[0xfec00000] gsi_base[0])=0A[ 0.000000] IOAPIC[0]: apic_id = 1, version 32, address 0xfec00000, GSI 0-23=0A[ 0.000000] ACPI: IOAPIC (= id[0x03] address[0xfec8a000] gsi_base[24])=0A[ 0.000000] IOAPIC[1]: apic= _id 3, version 32, address 0xfec8a000, GSI 24-47=0A[ 0.000000] ACPI: INT= _SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)=0A[ 0.000000] ACPI: INT_= SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)=0A[ 0.000000] Using AC= PI (MADT) for SMP configuration information=0A[ 0.000000] ACPI: HPET id:= 0x8086a301 base: 0xfed00000=0A[ 0.000000] SMP: Allowing 24 CPUs, 12 hot= plug CPUs=0A[ 0.000000] PM: Registered nosave memory: 000000000009f000 -= 00000000000a0000=0A[ 0.000000] PM: Registered nosave memory: 0000000000= 0a0000 - 00000000000e5000=0A[ 0.000000] PM: Registered nosave memory: 00= 000000000e5000 - 0000000000100000=0A[ 0.000000] PM: Registered nosave me= mory: 00000000bf780000 - 00000000bf78e000=0A[ 0.000000] PM: Registered n= osave memory: 00000000bf78e000 - 00000000bf790000=0A[ 0.000000] PM: Regi= stered nosave memory: 00000000bf790000 - 00000000bf79e000=0A[ 0.000000] = PM: Registered nosave memory: 00000000bf79e000 - 00000000bf7d0000=0A[ 0.= 000000] PM: Registered nosave memory: 00000000bf7d0000 - 00000000bf7e0000= =0A[ 0.000000] PM: Registered nosave memory: 00000000bf7e0000 - 00000000= bf7ed000=0A[ 0.000000] PM: Registered nosave memory: 00000000bf7ed000 - = 00000000c0000000=0A[ 0.000000] PM: Registered nosave memory: 00000000c00= 00000 - 00000000e0000000=0A[ 0.000000] PM: Registered nosave memory: 000= 00000e0000000 - 00000000f0000000=0A[ 0.000000] PM: Registered nosave mem= ory: 00000000f0000000 - 00000000fee00000=0A[ 0.000000] PM: Registered no= save memory: 00000000fee00000 - 00000000fee01000=0A[ 0.000000] PM: Regis= tered nosave memory: 00000000fee01000 - 00000000ffe00000=0A[ 0.000000] P= M: Registered nosave memory: 00000000ffe00000 - 0000000100000000=0A[ 0.0= 00000] Allocating PCI resources starting at c0000000 (gap: c0000000:2000000= 0)=0A[ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:24 nr_node_ids= :2=0A[ 0.000000] PERCPU: Embedded 64 pages/cpu @ffff88002da00000 s231896= r8192 d22056 u262144=0A[ 0.000000] pcpu-alloc: s231896 r8192 d22056 u26= 2144 alloc=3D1*2097152=0A[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 1= 2 14 [0] 16 18 20 22 -- -- -- -- =0A[ 0.000000] pcpu-alloc: [1] 06 07 08= 09 10 11 13 15 [1] 17 19 21 23 -- -- -- -- =0A[ 0.000000] Built 2 zonel= ists in Zone order, mobility grouping on. Total pages: 3096746=0A[ 0.00= 0000] Policy zone: Normal=0A[ 0.000000] Kernel command line: BOOT_IMAGE= =3D/boot/vmlinuz-2.6.32.20-adeos root=3D/dev/sda1 ro console=3DttyS0, 38400= console=3Dtty0=0A[ 0.000000] PID hash table entries: 4096 (order: 3, 32= 768 bytes)=0A[ 0.000000] Initializing CPU#0=0A[ 0.000000] Checking ap= erture...=0A[ 0.000000] No AGP bridge found=0A[ 0.000000] PCI-DMA: Us= ing software bounce buffering for IO (SWIOTLB)=0A[ 0.000000] Placing 64M= B software IO TLB between ffff880020000000 - ffff880024000000=0A[ 0.0000= 00] software IO TLB at phys 0x20000000 - 0x24000000=0A[ 0.000000] Memory= : 12317716k/13631488k available (5458k kernel code, 1057732k absent, 256040= k reserved, 2598k data, 860k init)=0A[ 0.000000] SLUB: Genslabs=3D14, HW= align=3D64, Order=3D0-3, MinObjects=3D0, CPUs=3D24, Nodes=3D2=0A[ 0.0000= 00] Hierarchical RCU implementation.=0A[ 0.000000] NR_IRQS:4352 nr_irqs:= 1008=0A[ 0.000000] Extended CMOS year: 2000=0A[ 0.000000] I-pipe 2.7-= 03: pipeline enabled.=0A[ 0.000000] Console: colour VGA+ 80x25=0A[ 0.= 000000] console [tty0] enabled=0A[ 0.000000] console [ttyS0] enabled=0A[= 0.000000] allocated 125829120 bytes of page_cgroup=0A[ 0.000000] ple= ase try 'cgroup_disable=3Dmemory' option if you don't want memory cgroups= =0A[ 0.000000] HPET: 4 timers in total, 0 timers will be used for per-cp= u timer=0A[ 0.010000] Fast TSC calibration using PIT=0A[ 0.020000] De= tected 2666.389 MHz processor.=0A[ 0.000008] Calibrating delay loop (ski= pped), value calculated using timer frequency.. 5332.77 BogoMIPS (lpj=3D266= 63890)=0A[ 0.032230] Security Framework initialized=0A[ 0.044567] SEL= inux: Disabled at boot.=0A[ 0.057149] Dentry cache hash table entries: = 2097152 (order: 12, 16777216 bytes)=0A[ 0.082700] Inode-cache hash table= entries: 1048576 (order: 11, 8388608 bytes)=0A[ 0.105764] Mount-cache h= ash table entries: 256=0A[ 0.119514] Initializing cgroup subsys ns=0A[ = 0.131593] Initializing cgroup subsys cpuacct=0A[ 0.144957] Initializin= g cgroup subsys memory=0A[ 0.158071] Initializing cgroup subsys devices= =0A[ 0.171450] Initializing cgroup subsys freezer=0A[ 0.184814] Initi= alizing cgroup subsys net_cls=0A[ 0.198200] CPU: Physical Processor ID: = 0=0A[ 0.210972] CPU: Processor Core ID: 0=0A[ 0.221997] CPU: L1 I cac= he: 32K, L1 D cache: 32K=0A[ 0.236218] CPU: L2 cache: 256K=0A[ 0.2456= 81] CPU: L3 cache: 12288K=0A[ 0.255668] CPU 0/0x0 -> Node 0=0A[ 0.265= 132] mce: CPU supports 9 MCE banks=0A[ 0.277203] CPU0: Thermal monitorin= g enabled (TM1)=0A[ 0.291628] CPU 0 MCA banks CMCI:2 CMCI:3 CMCI:5 CMCI:= 6 CMCI:8=0A[ 0.309619] Performance Events: Westmere events, Intel PMU dr= iver.=0A[ 0.328339] ... version: 3=0A[ 0.340403] ... b= it width: 48=0A[ 0.352727] ... generic registers: 4=0A= [ 0.364792] ... value mask: 0000ffffffffffff=0A[ 0.380757= ] ... max period: 000000007fffffff=0A[ 0.396721] ... fixed-p= urpose events: 3=0A[ 0.408786] ... event mask: 00000007000= 0000f=0A[ 0.424757] ACPI: Core revision 20090903=0A[ 0.469062] ftrace= : converting mcount calls to 0f 1f 44 00 00=0A[ 0.486351] ftrace: alloca= ting 21289 entries in 84 pages=0A[ 0.507848] Setting APIC routing to phy= sical flat=0A[ 0.522421] ..TIMER: vector=3D0x30 apic1=3D0 pin1=3D2 apic2= =3D-1 pin2=3D-1=0A[ 0.640479] ..MP-BIOS bug: 8254 timer not connected to= IO-APIC=0A[ 0.658031] ...trying to set up timer (IRQ0) through the 8259= A ...=0A[ 0.676621] ..... (found apic 0 pin 2) ...=0A[ 0.789836] ....= ... works.=0A[ 0.797996] CPU0: Intel(R) Xeon(R) CPU X5650 @ 2= .67GHz stepping 02=0A[ 0.932178] Booting processor 1 APIC 0x2 ip 0x6000= =0A[ 0.957334] Initializing CPU#1=0A[ 1.102079] CPU: Physical Process= or ID: 0=0A[ 1.102080] CPU: Processor Core ID: 1=0A[ 1.102082] CPU: L= 1 I cache: 32K, L1 D cache: 32K=0A[ 1.102083] CPU: L2 cache: 256K=0A[ = 1.102084] CPU: L3 cache: 12288K=0A[ 1.102086] CPU 1/0x2 -> Node 0=0A[ = 1.102098] CPU1: Thermal monitoring enabled (TM1)=0A[ 1.102101] CPU 1 M= CA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8=0A[ 1.102181] CPU1: Intel(R) X= eon(R) CPU X5650 @ 2.67GHz stepping 02=0A[ 1.230549] checking= TSC synchronization [CPU#0 -> CPU#1]: passed.=0A[ 1.270018] Booting pro= cessor 2 APIC 0x4 ip 0x6000=0A[ 1.295002] Initializing CPU#2=0A[ 1.44= 2085] CPU: Physical Processor ID: 0=0A[ 1.442086] CPU: Processor Core ID= : 2=0A[ 1.442088] CPU: L1 I cache: 32K, L1 D cache: 32K=0A[ 1.442090]= CPU: L2 cache: 256K=0A[ 1.442091] CPU: L3 cache: 12288K=0A[ 1.442093= ] CPU 2/0x4 -> Node 0=0A[ 1.442103] CPU2: Thermal monitoring enabled (TM= 1)=0A[ 1.442106] CPU 2 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8=0A[ = 1.442159] CPU2: Intel(R) Xeon(R) CPU X5650 @ 2.67GHz stepping 0= 2=0A[ 1.571368] checking TSC synchronization [CPU#0 -> CPU#2]: passed.= =0A[ 1.610109] Booting processor 3 APIC 0x10 ip 0x6000=0A[ 1.635355] = Initializing CPU#3=0A[ 1.782092] CPU: Physical Processor ID: 0=0A[ 1.= 782093] CPU: Processor Core ID: 8=0A[ 1.782095] CPU: L1 I cache: 32K, L1= D cache: 32K=0A[ 1.782097] CPU: L2 cache: 256K=0A[ 1.782098] CPU: L3= cache: 12288K=0A[ 1.782099] CPU 3/0x10 -> Node 0=0A[ 1.782110] CPU3:= Thermal monitoring enabled (TM1)=0A[ 1.782113] CPU 3 MCA banks CMCI:2 C= MCI:3 CMCI:5 SHD:6 SHD:8=0A[ 1.782182] CPU3: Intel(R) Xeon(R) CPU = X5650 @ 2.67GHz stepping 02=0A[ 1.910783] checking TSC synchronizat= ion [CPU#0 -> CPU#3]: passed.=0A[ 1.949526] Booting processor 4 APIC 0x1= 2 ip 0x6000=0A[ 1.974723] Initializing CPU#4=0A[ 2.122099] CPU: Physi= cal Processor ID: 0=0A[ 2.122100] CPU: Processor Core ID: 9=0A[ 2.122= 102] CPU: L1 I cache: 32K, L1 D cache: 32K=0A[ 2.122103] CPU: L2 cache: = 256K=0A[ 2.122104] CPU: L3 cache: 12288K=0A[ 2.122106] CPU 4/0x12 -> = Node 0=0A[ 2.122116] CPU4: Thermal monitoring enabled (TM1)=0A[ 2.122= 119] CPU 4 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8=0A[ 2.122226] CPU4= : Intel(R) Xeon(R) CPU X5650 @ 2.67GHz stepping 02=0A[ 2.2508= 50] checking TSC synchronization [CPU#0 -> CPU#4]: passed.=0A[ 2.290424]= Booting processor 5 APIC 0x14 ip 0x6000=0A[ 2.315621] Initializing CPU#= 5=0A[ 2.462105] CPU: Physical Processor ID: 0=0A[ 2.462106] CPU: Proc= essor Core ID: 10=0A[ 2.462108] CPU: L1 I cache: 32K, L1 D cache: 32K=0A= [ 2.462109] CPU: L2 cache: 256K=0A[ 2.462110] CPU: L3 cache: 12288K= =0A[ 2.462112] CPU 5/0x14 -> Node 0=0A[ 2.462122] CPU5: Thermal monit= oring enabled (TM1)=0A[ 2.462125] CPU 5 MCA banks CMCI:2 CMCI:3 CMCI:5 S= HD:6 SHD:8=0A[ 2.462156] CPU5: Intel(R) Xeon(R) CPU X5650 @ 2= .67GHz stepping 02=0A[ 2.591955] checking TSC synchronization [CPU#0 -> = CPU#5]: passed.=0A[ 2.630710] Booting processor 6 APIC 0x20 ip 0x6000=0A= [ 2.655943] Initializing CPU#6=0A[ 2.802112] CPU: Physical Processor = ID: 1=0A[ 2.802114] CPU: Processor Core ID: 0=0A[ 2.802116] CPU: L1 I= cache: 32K, L1 D cache: 32K=0A[ 2.802117] CPU: L2 cache: 256K=0A[ 2.= 802118] CPU: L3 cache: 12288K=0A[ 2.802120] CPU 6/0x20 -> Node 1=0A[ = 2.802133] CPU6: Thermal monitoring enabled (TM1)=0A[ 2.802136] CPU 6 MCA= banks CMCI:2 CMCI:3 CMCI:5 CMCI:6 CMCI:8=0A[ 2.802227] CPU6: Intel(R) X= eon(R) CPU X5650 @ 2.67GHz stepping 02=0A[ 2.931373] checking= TSC synchronization [CPU#0 -> CPU#6]: passed.=0A[ 2.970096] Booting pro= cessor 7 APIC 0x22 ip 0x6000=0A[ 2.995335] Initializing CPU#7=0A[ 3.1= 42120] CPU: Physical Processor ID: 1=0A[ 3.142122] CPU: Processor Core I= D: 1=0A[ 3.142124] CPU: L1 I cache: 32K, L1 D cache: 32K=0A[ 3.142126= ] CPU: L2 cache: 256K=0A[ 3.142127] CPU: L3 cache: 12288K=0A[ 3.14212= 9] CPU 7/0x22 -> Node 1=0A[ 3.142142] CPU7: Thermal monitoring enabled (= TM1)=0A[ 3.142145] CPU 7 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8=0A[ = 3.142159] CPU7: Intel(R) Xeon(R) CPU X5650 @ 2.67GHz stepping= 02=0A[ 3.270761] checking TSC synchronization [CPU#0 -> CPU#7]: passed.= =0A[ 3.310266] Booting processor 8 APIC 0x24 ip 0x6000=0A[ 3.335504] = Initializing CPU#8=0A[ 3.482127] CPU: Physical Processor ID: 1=0A[ 3.= 482128] CPU: Processor Core ID: 2=0A[ 3.482131] CPU: L1 I cache: 32K, L1= D cache: 32K=0A[ 3.482132] CPU: L2 cache: 256K=0A[ 3.482133] CPU: L3= cache: 12288K=0A[ 3.482135] CPU 8/0x24 -> Node 1=0A[ 3.482148] CPU8:= Thermal monitoring enabled (TM1)=0A[ 3.482151] CPU 8 MCA banks CMCI:2 C= MCI:3 CMCI:5 SHD:6 SHD:8=0A[ 3.482188] CPU8: Intel(R) Xeon(R) CPU = X5650 @ 2.67GHz stepping 02=0A[ 3.612623] checking TSC synchronizat= ion [CPU#0 -> CPU#8]: passed.=0A[ 3.651341] Booting processor 9 APIC 0x3= 0 ip 0x6000=0A[ 3.676585] Initializing CPU#9=0A[ 3.822134] CPU: Physi= cal Processor ID: 1=0A[ 3.822135] CPU: Processor Core ID: 8=0A[ 3.822= 137] CPU: L1 I cache: 32K, L1 D cache: 32K=0A[ 3.822139] CPU: L2 cache: = 256K=0A[ 3.822140] CPU: L3 cache: 12288K=0A[ 3.822142] CPU 9/0x30 -> = Node 1=0A[ 3.822154] CPU9: Thermal monitoring enabled (TM1)=0A[ 3.822= 157] CPU 9 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8=0A[ 3.822263] CPU9= : Intel(R) Xeon(R) CPU X5650 @ 2.67GHz stepping 02=0A[ 3.9508= 95] checking TSC synchronization [CPU#0 -> CPU#9]: passed.=0A[ 3.989616]= Booting processor 10 APIC 0x32 ip 0x6000=0A[ 4.015067] Initializing CPU= #10=0A[ 4.162140] CPU: Physical Processor ID: 1=0A[ 4.162142] CPU: Pr= ocessor Core ID: 9=0A[ 4.162144] CPU: L1 I cache: 32K, L1 D cache: 32K= =0A[ 4.162145] CPU: L2 cache: 256K=0A[ 4.162146] CPU: L3 cache: 12288= K=0A[ 4.162148] CPU 10/0x32 -> Node 1=0A[ 4.162160] CPU10: Thermal mo= nitoring enabled (TM1)=0A[ 4.162163] CPU 10 MCA banks CMCI:2 CMCI:3 CMCI= :5 SHD:6 SHD:8=0A[ 4.162193] CPU10: Intel(R) Xeon(R) CPU X5650= @ 2.67GHz stepping 02=0A[ 4.292157] checking TSC synchronization [CPU#= 0 -> CPU#10]: passed.=0A[ 4.331975] Booting processor 11 APIC 0x34 ip 0x= 6000=0A[ 4.357421] Initializing CPU#11=0A[ 4.502147] CPU: Physical Pr= ocessor ID: 1=0A[ 4.502148] CPU: Processor Core ID: 10=0A[ 4.502151] = CPU: L1 I cache: 32K, L1 D cache: 32K=0A[ 4.502152] CPU: L2 cache: 256K= =0A[ 4.502153] CPU: L3 cache: 12288K=0A[ 4.502155] CPU 11/0x34 -> Nod= e 1=0A[ 4.502167] CPU11: Thermal monitoring enabled (TM1)=0A[ 4.50217= 0] CPU 11 MCA banks CMCI:2 CMCI:3 CMCI:5 SHD:6 SHD:8=0A[ 4.502256] CPU11= : Intel(R) Xeon(R) CPU X5650 @ 2.67GHz stepping 02=0A[ 4.6331= 86] checking TSC synchronization [CPU#0 -> CPU#11]: passed.=0A[ 4.672119= ] Brought up 12 CPUs=0A[ 4.681339] Total of 12 processors activated (640= 01.30 BogoMIPS).=0A[ 4.706578] devtmpfs: initialized=0A[ 4.716876] re= gulator: core version 0.5=0A[ 4.728446] Time: 5:20:28 Date: 05/05/11= =0A[ 4.740813] NET: Registered protocol family 16=0A[ 4.754275] ACPI:= bus type pci registered=0A[ 4.766400] PCI: Using configuration type 1 f= or base access=0A[ 4.783996] bio: create slab at 0=0A[ 4.7991= 28] ACPI Warning for \_SB_._OSC: Return type mismatch - found Integer, expe= cted Buffer (20090903/nspredef-1006)=0A[ 4.833092] ACPI: Executed 1 bloc= ks of module-level executable AML code=0A[ 4.860361] ACPI: Interpreter e= nabled=0A[ 4.871406] ACPI: (supports S0 S1 S4 S5)=0A[ 4.883520] ACPI:= Using IOAPIC for interrupt routing=0A[ 4.908162] ACPI Warning: Incorrec= t checksum in table [OEMB] - EC, should be E9 (20090903/tbutils-314)=0A[ = 4.936524] ACPI: No dock devices found.=0A[ 4.948474] ACPI: PCI Root Bri= dge [PCI0] (0000:00)=0A[ 4.962969] pci 0000:00:00.0: PME# supported from= D0 D3hot D3cold=0A[ 4.981285] pci 0000:00:00.0: PME# disabled=0A[ 4.= 993923] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold=0A[ 5.0122= 54] pci 0000:00:01.0: PME# disabled=0A[ 5.024915] pci 0000:00:02.0: PME#= supported from D0 D3hot D3cold=0A[ 5.043246] pci 0000:00:02.0: PME# dis= abled=0A[ 5.055906] pci 0000:00:03.0: PME# supported from D0 D3hot D3col= d=0A[ 5.075150] pci 0000:00:03.0: PME# disabled=0A[ 5.087814] pci 000= 0:00:07.0: PME# supported from D0 D3hot D3cold=0A[ 5.106142] pci 0000:00= :07.0: PME# disabled=0A[ 5.118803] pci 0000:00:08.0: PME# supported from= D0 D3hot D3cold=0A[ 5.137135] pci 0000:00:08.0: PME# disabled=0A[ 5.= 149795] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold=0A[ 5.1681= 28] pci 0000:00:09.0: PME# disabled=0A[ 5.180789] pci 0000:00:0a.0: PME#= supported from D0 D3hot D3cold=0A[ 5.199121] pci 0000:00:0a.0: PME# dis= abled=0A[ 5.212657] pci 0000:00:1a.7: PME# supported from D0 D3hot D3col= d=0A[ 5.230973] pci 0000:00:1a.7: PME# disabled=0A[ 5.243652] pci 000= 0:00:1b.0: PME# supported from D0 D3hot D3cold=0A[ 5.261966] pci 0000:00= :1b.0: PME# disabled=0A[ 5.274628] pci 0000:00:1c.0: PME# supported from= D0 D3hot D3cold=0A[ 5.292960] pci 0000:00:1c.0: PME# disabled=0A[ 5.= 305625] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold=0A[ 5.3239= 51] pci 0000:00:1c.4: PME# disabled=0A[ 5.337474] pci 0000:00:1c.5: PME#= supported from D0 D3hot D3cold=0A[ 5.355802] pci 0000:00:1c.5: PME# dis= abled=0A[ 5.368737] pci 0000:00:1d.7: PME# supported from D0 D3hot D3col= d=0A[ 5.387058] pci 0000:00:1d.7: PME# disabled=0A[ 5.399777] pci 000= 0:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO=0A[ 5.4= 22808] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO=0A[ = 5.443480] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mas= k 0003)=0A[ 5.466256] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO= at 0294 (mask 0003)=0A[ 5.489605] pci 0000:03:00.0: PME# supported from= D0 D3hot D3cold=0A[ 5.507938] pci 0000:03:00.0: PME# disabled=0A[ 5.= 520766] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold=0A[ 5.5390= 87] pci 0000:02:00.0: PME# disabled=0A[ 5.551828] pci 0000:01:01.0: PME#= supported from D0 D1 D2 D3hot D3cold=0A[ 5.571714] pci 0000:01:01.0: PM= E# disabled=0A[ 5.585143] pci 0000:00:1e.0: transparent bridge=0A[ 5.= 636763] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)=0A[ = 5.658367] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)=0A[ 5.673888] ACP= I: PCI Interrupt Link [LNKC] (IRQs 3 4 6 *7 10 11 12 14 15)=0A[ 5.695494= ] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 *10 11 12 14 15)=0A[ 5.7= 17105] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, di= sabled.=0A[ 5.742273] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 1= 1 12 14 *15)=0A[ 5.763879] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7= 10 11 12 *14 15)=0A[ 5.785485] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 = 4 6 7 10 *11 12 14 15)=0A[ 5.807081] vgaarb: device added: PCI:0000:01:0= 1.0,decodes=3Dio+mem,owns=3Dio+mem,locks=3Dnone=0A[ 5.831410] vgaarb: lo= aded=0A[ 5.840403] SCSI subsystem initialized=0A[ 5.852025] usbcore: = registered new interface driver usbfs=0A[ 5.868546] usbcore: registered = new interface driver hub=0A[ 5.884558] usbcore: registered new device dr= iver usb=0A[ 5.899855] PCI: Using ACPI for IRQ routing=0A[ 5.912620] = NetLabel: Initializing=0A[ 5.922882] NetLabel: domain hash size =3D 128= =0A[ 5.936013] NetLabel: protocols =3D UNLABELED CIPSOv4=0A[ 5.95096= 9] NetLabel: unlabeled traffic allowed by default=0A[ 6.012194] Switchi= ng to clocksource tsc=0A[ 6.025806] pnp: PnP ACPI init=0A[ 6.035040] = ACPI: bus type pnp registered=0A[ 6.050579] pnp: PnP ACPI: found 16 devi= ces=0A[ 6.063184] ACPI: ACPI bus type pnp unregistered=0A[ 6.077101] = system 00:01: iomem range 0xfbf00000-0xfbffffff has been reserved=0A[ 6.= 099455] system 00:01: iomem range 0xfc000000-0xfcffffff has been reserved= =0A[ 6.120907] system 00:01: iomem range 0xfd000000-0xfdffffff has been = reserved=0A[ 6.142356] system 00:01: iomem range 0xfe000000-0xfebfffff h= as been reserved=0A[ 6.163808] system 00:01: iomem range 0xfec8a000-0xfe= c8afff could not be reserved=0A[ 6.186325] system 00:01: iomem range 0xf= ed10000-0xfed10fff has been reserved=0A[ 6.207778] system 00:06: ioport = range 0x290-0x29f has been reserved=0A[ 6.226888] system 00:07: ioport r= ange 0x4d0-0x4d1 has been reserved=0A[ 6.245997] system 00:07: ioport ra= nge 0xca0-0xcaf has been reserved=0A[ 6.265106] system 00:07: ioport ran= ge 0x800-0x87f has been reserved=0A[ 6.284219] system 00:07: ioport rang= e 0x500-0x57f could not be reserved=0A[ 6.304367] system 00:07: iomem ra= nge 0xfed1c000-0xfed1ffff has been reserved=0A[ 6.325819] system 00:07: = iomem range 0xfed20000-0xfed3ffff has been reserved=0A[ 6.347270] system= 00:07: iomem range 0xfed40000-0xfed8ffff has been reserved=0A[ 6.369503= ] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved=0A[= 6.392017] system 00:0b: iomem range 0xfee00000-0xfee00fff has been rese= rved=0A[ 6.413469] system 00:0e: iomem range 0xe0000000-0xefffffff has b= een reserved=0A[ 6.434921] system 00:0f: iomem range 0x0-0x9ffff could n= ot be reserved=0A[ 6.454809] system 00:0f: iomem range 0xc0000-0xcffff h= as been reserved=0A[ 6.474700] system 00:0f: iomem range 0xe0000-0xfffff= could not be reserved=0A[ 6.495631] system 00:0f: iomem range 0x100000-= 0xbfffffff could not be reserved=0A[ 6.517628] system 00:0f: iomem range= 0xfed90000-0xffffffff could not be reserved=0A[ 6.544880] pci 0000:00:0= 1.0: PCI bridge, secondary bus 0000:0b=0A[ 6.562687] pci 0000:00:01.0: = IO window: disabled=0A[ 6.577380] pci 0000:00:01.0: MEM window: disab= led=0A[ 6.592328] pci 0000:00:01.0: PREFETCH window: disabled=0A[ 6= .609386] pci 0000:00:02.0: PCI bridge, secondary bus 0000:0a=0A[ 6.62719= 6] pci 0000:00:02.0: IO window: disabled=0A[ 6.641886] pci 0000:00:02.= 0: MEM window: disabled=0A[ 6.656837] pci 0000:00:02.0: PREFETCH win= dow: disabled=0A[ 6.673089] pci 0000:00:03.0: PCI bridge, secondary bus = 0000:09=0A[ 6.690897] pci 0000:00:03.0: IO window: disabled=0A[ 6.7= 05589] pci 0000:00:03.0: MEM window: disabled=0A[ 6.720540] pci 0000:0= 0:03.0: PREFETCH window: disabled=0A[ 6.736792] pci 0000:00:07.0: PCI = bridge, secondary bus 0000:08=0A[ 6.754598] pci 0000:00:07.0: IO windo= w: disabled=0A[ 6.769293] pci 0000:00:07.0: MEM window: disabled=0A[ = 6.784240] pci 0000:00:07.0: PREFETCH window: disabled=0A[ 6.800495] = pci 0000:00:08.0: PCI bridge, secondary bus 0000:07=0A[ 6.818301] pci 00= 00:00:08.0: IO window: disabled=0A[ 6.832994] pci 0000:00:08.0: MEM = window: disabled=0A[ 6.847943] pci 0000:00:08.0: PREFETCH window: disa= bled=0A[ 6.864873] pci 0000:00:09.0: PCI bridge, secondary bus 0000:06= =0A[ 6.882680] pci 0000:00:09.0: IO window: disabled=0A[ 6.898281] = pci 0000:00:09.0: MEM window: disabled=0A[ 6.913231] pci 0000:00:09.0:= PREFETCH window: disabled=0A[ 6.929485] pci 0000:00:0a.0: PCI bridge,= secondary bus 0000:05=0A[ 6.947291] pci 0000:00:0a.0: IO window: disa= bled=0A[ 6.961984] pci 0000:00:0a.0: MEM window: disabled=0A[ 6.976= 934] pci 0000:00:0a.0: PREFETCH window: disabled=0A[ 6.993188] pci 000= 0:00:1c.0: PCI bridge, secondary bus 0000:04=0A[ 7.010995] pci 0000:00:1= c.0: IO window: 0x1000-0x1fff=0A[ 7.026988] pci 0000:00:1c.0: MEM wi= ndow: 0xc0000000-0xc01fffff=0A[ 7.045317] pci 0000:00:1c.0: PREFETCH w= indow: 0x000000c0200000-0x000000c03fffff=0A[ 7.068098] pci 0000:00:1c.4:= PCI bridge, secondary bus 0000:03=0A[ 7.085905] pci 0000:00:1c.4: IO = window: 0xe000-0xefff=0A[ 7.101896] pci 0000:00:1c.4: MEM window: 0xfb= e00000-0xfbefffff=0A[ 7.121138] pci 0000:00:1c.4: PREFETCH window: 0x0= 00000c0400000-0x000000c05fffff=0A[ 7.143915] pci 0000:00:1c.5: PCI bridg= e, secondary bus 0000:02=0A[ 7.161723] pci 0000:00:1c.5: IO window: 0x= d000-0xdfff=0A[ 7.177715] pci 0000:00:1c.5: MEM window: 0xfbd00000-0xf= bdfffff=0A[ 7.196045] pci 0000:00:1c.5: PREFETCH window: 0x000000c0600= 000-0x000000c07fffff=0A[ 7.218823] pci 0000:00:1e.0: PCI bridge, seconda= ry bus 0000:01=0A[ 7.236630] pci 0000:00:1e.0: IO window: 0xc000-0xcff= f=0A[ 7.252622] pci 0000:00:1e.0: MEM window: 0xfaf00000-0xfb7fffff=0A= [ 7.270953] pci 0000:00:1e.0: PREFETCH window: disabled=0A[ 7.28725= 7] pci 0000:00:1c.0: enabling device (0104 -> 0107)=0A[ 7.304293] pci 00= 00:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17=0A[ 7.324445] pci= 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17=0A[ 7.344601] = pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16=0A[ 7.36480= 3] NET: Registered protocol family 2=0A[ 7.379035] IP route cache hash t= able entries: 524288 (order: 10, 4194304 bytes)=0A[ 7.402427] TCP establ= ished hash table entries: 524288 (order: 11, 8388608 bytes)=0A[ 7.426387= ] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)=0A[ 7.446= 711] TCP: Hash tables configured (established 524288 bind 65536)=0A[ 7.4= 66610] TCP reno registered=0A[ 7.476223] NET: Registered protocol family= 1=0A[ 7.490116] Scanning for low memory corruption every 60 seconds=0A[= 7.508033] audit: initializing netlink socket (disabled)=0A[ 7.524292= ] type=3D2000 audit(1304572824.310:1): initialized=0A[ 7.547286] I-pipe:= Domain Xenomai registered.=0A[ 7.560860] Xenomai: hal/x86_64 started.= =0A[ 7.572692] Xenomai: scheduling class idle registered.=0A[ 7.58816= 3] Xenomai: scheduling class rt registered.=0A[ 7.603997] Xenomai: real-= time nucleus v2.5.5.2 (Ghosts) loaded.=0A[ 7.622256] Xenomai: SMI-enable= d chipset found, but SMI workaround disabled=0A[ 7.622257] (che= ck CONFIG_XENO_HW_SMI_WORKAROUND). You may encounter=0A[ 7.622258] = high interrupt latencies!=0A[ 7.678156] Xenomai: starting native API= services.=0A[ 7.692584] Xenomai: starting POSIX services.=0A[ 7.7057= 34] Xenomai: starting RTDM services.=0A[ 7.719281] HugeTLB registered 2 = MB page size, pre-allocated 0 pages=0A[ 7.739692] VFS: Disk quotas dquot= _6.5.2=0A[ 7.751541] Dquot-cache hash table entries: 512 (order 0, 4096 = bytes)=0A[ 7.771396] fuse init (API version 7.13)=0A[ 7.783286] msgmn= i has been set to 24058=0A[ 7.795630] alg: No test for stdrng (krng)=0A[= 7.808037] Block layer SCSI generic (bsg) driver version 0.4 loaded (maj= or 253)=0A[ 7.830313] io scheduler noop registered=0A[ 7.842139] io s= cheduler anticipatory registered=0A[ 7.856024] io scheduler deadline reg= istered=0A[ 7.868898] io scheduler cfq registered (default)=0A[ 7.884= 098] pci_hotplug: PCI Hot Plug PCI Core version: 0.5=0A[ 7.900937] pcieh= p: PCI Express Hot Plug Controller Driver version: 0.4=0A[ 7.920915] inp= ut: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input= 0=0A[ 7.946045] ACPI: Power Button [PWRB]=0A[ 7.957123] input: Power = Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1=0A[ 7.979374] AC= PI: Power Button [PWRF]=0A[ 7.991221] Linux agpgart interface v0.103=0A[= 8.003558] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled=0A[ = 8.022491] serial8250: ttyS0 at I/O 0x3f8 (irq =3D 4) is a 16550A=0A[ 8= .040637] serial8250: ttyS1 at I/O 0x2f8 (irq =3D 3) is a 16550A=0A[ 8.05= 8945] 00:09: ttyS0 at I/O 0x3f8 (irq =3D 4) is a 16550A=0A[ 8.075820] 00= :0a: ttyS1 at I/O 0x2f8 (irq =3D 3) is a 16550A=0A[ 8.093428] brd: modul= e loaded=0A[ 8.103001] loop: module loaded=0A[ 8.112528] input: Macin= tosh mouse button emulation as /devices/virtual/input/input2=0A[ 8.13589= 7] ata_piix 0000:00:1f.2: PCI INT A -> GSI 23 (level, low) -> IRQ 23=0A[ = 8.157353] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]=0A[ 8.173298] scsi= 0 : ata_piix=0A[ 8.182069] scsi1 : ata_piix=0A[ 8.192092] ata1: SATA = max UDMA/133 cmd 0xac00 ctl 0xa880 bmdma 0xa400 irq 23=0A[ 8.213542] ata= 2: SATA max UDMA/133 cmd 0xa800 ctl 0xa480 bmdma 0xa408 irq 23=0A[ 8.235= 011] ata_piix 0000:00:1f.5: PCI INT B -> GSI 21 (level, low) -> IRQ 21=0A[ = 8.256467] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]=0A[ 8.272399] sc= si2 : ata_piix=0A[ 8.281142] scsi3 : ata_piix=0A[ 8.291113] ata3: SAT= A max UDMA/133 cmd 0xbc00 ctl 0xb880 bmdma 0xb400 irq 21=0A[ 8.312551] a= ta4: SATA max UDMA/133 cmd 0xb800 ctl 0xb480 bmdma 0xb408 irq 21=0A[ 8.3= 34214] Fixed MDIO Bus: probed=0A[ 8.344501] PPP generic driver version 2= .4.2=0A[ 8.357374] tun: Universal TUN/TAP device driver, 1.6=0A[ 8.37= 2585] tun: (C) 1999-2004 Max Krasnyansky =0A[ 8.39122= 7] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver=0A[ 8.4108= 79] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18=0A[ = 8.432355] ehci_hcd 0000:00:1a.7: EHCI Host Controller=0A[ 8.448092] eh= ci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1=0A[ 8= .470370] ehci_hcd 0000:00:1a.7: debug port 1=0A[ 8.487907] ehci_hcd 0000= :00:1a.7: irq 18, io mem 0xfbcf9000=0A[ 8.535314] ehci_hcd 0000:00:1a.7:= USB 2.0 started, EHCI 1.00=0A[ 8.552680] usb usb1: configuration #1 cho= sen from 1 choice=0A[ 8.569463] hub 1-0:1.0: USB hub found=0A[ 8.5807= 54] hub 1-0:1.0: 4 ports detected=0A[ 8.592892] ehci_hcd 0000:00:1d.7: P= CI INT A -> GSI 23 (level, low) -> IRQ 23=0A[ 8.614363] ehci_hcd 0000:00= :1d.7: EHCI Host Controller=0A[ 8.630096] ehci_hcd 0000:00:1d.7: new USB= bus registered, assigned bus number 2=0A[ 8.652374] ehci_hcd 0000:00:1d= .7: debug port 1=0A[ 8.669883] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf= bcfa000=0A[ 8.684998] ata3: SATA link down (SStatus 0 SControl 300)=0A[ = 8.724046] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00=0A[ 8.741= 375] usb usb2: configuration #1 chosen from 1 choice=0A[ 8.758148] hub 2= -0:1.0: USB hub found=0A[ 8.769440] hub 2-0:1.0: 8 ports detected=0A[ = 8.781577] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver=0A[ 8.= 800184] uhci_hcd: USB Universal Host Controller Interface driver=0A[ 8.8= 19304] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16=0A= [ 8.840769] uhci_hcd 0000:00:1a.0: UHCI Host Controller=0A[ 8.844090]= ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)=0A[ 8.875126] uh= ci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3=0A[ 8= .876327] ata4.00: ATA-7: SQF-S25M4-16G, VER2.A13, max UDMA/133=0A[ 8.876= 331] ata4.00: 30080736 sectors, multi 0: LBA48 =0A[ 8.915202] ata4.00: c= onfigured for UDMA/133=0A[ 8.954770] ata2.00: SATA link down (SStatus 0 = SControl 300)=0A[ 8.964060] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000= 09400=0A[ 8.964155] usb usb3: configuration #1 chosen from 1 choice=0A[ = 8.964178] hub 3-0:1.0: USB hub found=0A[ 8.964183] hub 3-0:1.0: 2 por= ts detected=0A[ 8.964222] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (le= vel, low) -> IRQ 21=0A[ 8.964230] uhci_hcd 0000:00:1a.1: UHCI Host Contr= oller=0A[ 8.964255] uhci_hcd 0000:00:1a.1: new USB bus registered, assig= ned bus number 4=0A[ 8.964285] uhci_hcd 0000:00:1a.1: irq 21, io base 0x= 00009480=0A[ 8.964349] usb usb4: configuration #1 chosen from 1 choice= =0A[ 8.964368] hub 4-0:1.0: USB hub found=0A[ 8.964372] hub 4-0:1.0: = 2 ports detected=0A[ 8.964407] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 2= 3 (level, low) -> IRQ 23=0A[ 8.964414] uhci_hcd 0000:00:1d.0: UHCI Host = Controller=0A[ 8.964435] uhci_hcd 0000:00:1d.0: new USB bus registered, = assigned bus number 5=0A[ 8.964461] uhci_hcd 0000:00:1d.0: irq 23, io ba= se 0x00009800=0A[ 8.964525] usb usb5: configuration #1 chosen from 1 cho= ice=0A[ 8.964541] hub 5-0:1.0: USB hub found=0A[ 8.964545] hub 5-0:1.= 0: 2 ports detected=0A[ 8.964585] uhci_hcd 0000:00:1d.1: PCI INT B -> GS= I 19 (level, low) -> IRQ 19=0A[ 8.964593] uhci_hcd 0000:00:1d.1: UHCI Ho= st Controller=0A[ 8.964615] uhci_hcd 0000:00:1d.1: new USB bus registere= d, assigned bus number 6=0A[ 8.964646] uhci_hcd 0000:00:1d.1: irq 19, io= base 0x00009880=0A[ 8.964715] usb usb6: configuration #1 chosen from 1 = choice=0A[ 8.964731] hub 6-0:1.0: USB hub found=0A[ 8.964735] hub 6-0= :1.0: 2 ports detected=0A[ 8.964770] uhci_hcd 0000:00:1d.2: PCI INT C ->= GSI 18 (level, low) -> IRQ 18=0A[ 8.964777] uhci_hcd 0000:00:1d.2: UHCI= Host Controller=0A[ 8.964798] uhci_hcd 0000:00:1d.2: new USB bus regist= ered, assigned bus number 7=0A[ 8.964824] uhci_hcd 0000:00:1d.2: irq 18,= io base 0x00009c00=0A[ 8.964893] usb usb7: configuration #1 chosen from= 1 choice=0A[ 8.964908] hub 7-0:1.0: USB hub found=0A[ 8.964912] hub = 7-0:1.0: 2 ports detected=0A[ 8.964947] uhci_hcd 0000:00:1d.3: PCI INT D= -> GSI 16 (level, low) -> IRQ 16=0A[ 8.964958] uhci_hcd 0000:00:1d.3: U= HCI Host Controller=0A[ 8.964982] uhci_hcd 0000:00:1d.3: new USB bus reg= istered, assigned bus number 8=0A[ 8.965007] uhci_hcd 0000:00:1d.3: irq = 16, io base 0x0000a000=0A[ 8.965066] usb usb8: configuration #1 chosen f= rom 1 choice=0A[ 8.965087] hub 8-0:1.0: USB hub found=0A[ 8.965091] h= ub 8-0:1.0: 2 ports detected=0A[ 8.965159] PNP: PS/2 Controller [PNP0303= :PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12=0A[ 8.968210] serio: i8042 KBD= port at 0x60,0x64 irq 1=0A[ 8.968214] serio: i8042 AUX port at 0x60,0x6= 4 irq 12=0A[ 8.968273] mice: PS/2 mouse device common for all mice=0A[ = 8.968350] rtc_cmos 00:03: RTC can wake from S4=0A[ 8.968375] rtc_cmos = 00:03: rtc core: registered rtc_cmos as rtc0=0A[ 8.968402] rtc0: alarms = up to one month, y3k, 114 bytes nvram, hpet irqs=0A[ 8.968505] device-ma= pper: uevent: version 1.0.3=0A[ 8.968596] device-mapper: ioctl: 4.15.0-i= octl (2009-04-01) initialised: dm-devel@domain.hid[ 8.968828] device-= mapper: multipath: version 1.1.0 loaded=0A[ 8.968830] device-mapper: mul= tipath round-robin: version 1.0.0 loaded=0A[ 8.968896] cpuidle: using go= vernor ladder=0A[ 8.968898] cpuidle: using governor menu=0A[ 8.969164= ] TCP cubic registered=0A[ 8.969269] NET: Registered protocol family 10= =0A[ 8.969691] lo: Disabled Privacy Extensions=0A[ 8.969872] NET: Reg= istered protocol family 17=0A[ 8.969951] registered taskstats version 1= =0A[ 8.970679] Magic number: 11:167:314=0A[ 8.990758] input: AT Tra= nslated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3=0A[ = 9.094089] ata1.00: SATA link down (SStatus 0 SControl 300)=0A[ 9.09410= 4] ata1.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)=0A[ 9.11456= 2] ata1.01: ATA-8: ST31000524NS, SN11, max UDMA/133=0A[ 9.114564] ata1.0= 1: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)=0A[ 9.154566] at= a1.01: configured for UDMA/133=0A[ 9.154658] scsi 0:0:1:0: Direct-Access= ATA ST31000524NS SN11 PQ: 0 ANSI: 5=0A[ 9.154759] sd 0:0:1= :0: Attached scsi generic sg0 type 0=0A[ 9.154828] sd 0:0:1:0: [sda] 195= 3525168 512-byte logical blocks: (1.00 TB/931 GiB)=0A[ 9.154858] sd 0:0:= 1:0: [sda] Write Protect is off=0A[ 9.154875] sd 0:0:1:0: [sda] Write ca= che: enabled, read cache: enabled, doesn't support DPO or FUA=0A[ 10.1251= 01] rtc_cmos 00:03: setting system clock to 2011-05-05 05:20:32 UTC (130457= 2832)=0A[ 10.125122] ata2.01: SATA link down (SStatus 0 SControl 300)=0A[= 10.125207] scsi 3:0:0:0: Direct-Access ATA SQF-S25M4-16G VER= 2 PQ: 0 ANSI: 5=0A[ 10.125283] sd 3:0:0:0: Attached scsi generic sg1 type= 0=0A[ 10.125324] sd 3:0:0:0: [sdb] 30080736 512-byte logical blocks: (15= .4 GB/14.3 GiB)=0A[ 10.125353] sd 3:0:0:0: [sdb] Write Protect is off=0A[= 10.125370] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, = doesn't support DPO or FUA=0A[ 10.271150] BIOS EDD facility v0.16 2004-Ju= n-25, 0 devices found=0A[ 10.289217] EDD information not available.=0A[ = 10.301718] sda:=0A[ 10.307096] sdb: sda1 sda2 < sdb1=0A[ 10.318631] = sd 3:0:0:0: [sdb] Attached SCSI disk=0A[ 10.336230] sda5 >=0A[ 10.3429= 22] sd 0:0:1:0: [sda] Attached SCSI disk=0A[ 10.356843] md: Waiting for a= ll devices to be available before autodetect=0A[ 10.377259] md: If you do= n't use raid, use raid=3Dnoautodetect=0A[ 10.394392] md: Autodetecting RA= ID arrays.=0A[ 10.406743] md: Scanned 0 and added 0 devices.=0A[ 10.420= 130] md: autorun ...=0A[ 10.428556] md: ... autorun DONE.=0A[ 10.461397= ] EXT3-fs: sda1: couldn't mount because of unsupported optional features (2= 40).=0A[ 10.486509] EXT2-fs: sda1: couldn't mount because of unsupported = optional features (240).=0A[ 10.604006] EXT4-fs (sda1): mounted filesyste= m with ordered data mode=0A[ 10.623515] VFS: Mounted root (ext4 filesyste= m) readonly on device 8:1.=0A[ 10.661763] devtmpfs: mounted=0A[ 10.6707= 42] Freeing unused kernel memory: 860k freed=0A[ 10.685824] Write protect= ing the kernel read-only data: 7512k=0A[ 16.860358] ioatdma 0000:00:16.0:= channel error register unreachable=0A[ 16.879490] ioatdma 0000:00:16.0: = channel enumeration error=0A[ 16.896315] ioatdma 0000:00:16.0: Intel(R) I= /OAT DMA Engine init failed=0A[ 16.916342] ioatdma 0000:00:16.1: channel = error register unreachable=0A[ 16.935511] ioatdma 0000:00:16.1: channel e= numeration error=0A[ 16.952321] ioatdma 0000:00:16.1: Intel(R) I/OAT DMA = Engine init failed=0A[ 16.972318] ioatdma 0000:00:16.2: channel error reg= ister unreachable=0A[ 16.991482] ioatdma 0000:00:16.2: channel enumeratio= n error=0A[ 17.008303] ioatdma 0000:00:16.2: Intel(R) I/OAT DMA Engine in= it failed=0A[ 17.028297] ioatdma 0000:00:16.3: channel error register unr= eachable=0A[ 17.047417] ioatdma 0000:00:16.3: channel enumeration error= =0A[ 17.064236] ioatdma 0000:00:16.3: Intel(R) I/OAT DMA Engine init fail= ed=0A[ 17.084233] ioatdma 0000:00:16.4: channel error register unreachabl= e=0A[ 17.103390] ioatdma 0000:00:16.4: channel enumeration error=0A[ 17= .120212] ioatdma 0000:00:16.4: Intel(R) I/OAT DMA Engine init failed=0A[ = 17.140198] ioatdma 0000:00:16.5: channel error register unreachable=0A[ 1= 7.159369] ioatdma 0000:00:16.5: channel enumeration error=0A[ 17.176188] = ioatdma 0000:00:16.5: Intel(R) I/OAT DMA Engine init failed=0A[ 17.196177= ] ioatdma 0000:00:16.6: channel error register unreachable=0A[ 17.215348]= ioatdma 0000:00:16.6: channel enumeration error=0A[ 17.232170] ioatdma 0= 000:00:16.6: Intel(R) I/OAT DMA Engine init failed=0A[ 17.252157] ioatdma= 0000:00:16.7: channel error register unreachable=0A[ 17.271333] ioatdma = 0000:00:16.7: channel enumeration error=0A[ 17.288149] ioatdma 0000:00:16= .7: Intel(R) I/OAT DMA Engine init failed=0A[ 17.693112] hda-intel: no co= decs found!=0A[ 51.470109] BUG: unable to handle kernel NULL pointer dere= ference at 000000000000001c=0A[ 51.493659] IP: [] __ipi= pe_get_ioapic_irq_vector+0x25/0x30=0A[ 51.514824] PGD 0 =0A[ 51.520908]= Thread overran stack, or stack corrupted=0A[ 51.535780] Oops: 0000 [#1] = SMP =0A[ 51.545558] last sysfs file: /sys/devices/pci0000:00/0000:00:1f.5= /host3/target3:0:0/3:0:0:0/block/sdb/uevent=0A[ 51.574990] CPU 0 =0A[ 5= 1.581073] Modules linked in: binfmt_misc ppdev dm_crypt snd_hda_intel snd_h= da_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy snd_seq_= oss snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_d= evice snd soundcore psmouse e1000e snd_page_alloc ioatdma dca serio_raw lp = parport=0A[ 51.664227] Pid: 0, comm: swapper Not tainted 2.6.32.20-adeos = #1 System Product Name=0A[ 51.687418] RIP: 0010:[] [] __ipipe_get_ioapic_irq_vector+0x25/0x30=0A[ 51.715864] = RSP: 0000:ffff88002da03eb8 EFLAGS: 00010046=0A[ 51.731775] RAX: 00000000= 00000000 RBX: ffffffff81988740 RCX: 0000000000000800=0A[ 51.753147] RDX: = 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000020=0A[ 51.77452= 0] RBP: ffff88002da03eb8 R08: 0000000000000004 R09: ffff88002da0ed60=0A[ = 51.795893] R10: ffff88002da0ed50 R11: ffff88002da0ed48 R12: 000000000000000= 0=0A[ 51.817266] R13: 0000000000000000 R14: 000000000000ed40 R15: ffff880= 02da0cf00=0A[ 51.838639] FS: 0000000000000000(0000) GS:ffff88002da00000(= 0000) knlGS:0000000000000000=0A[ 51.862871] CS: 0010 DS: 0018 ES: 0018 C= R0: 000000008005003b=0A[ 51.880084] CR2: 000000000000001c CR3: 0000000001= 001000 CR4: 00000000000006f0=0A[ 51.901457] DR0: 0000000000000000 DR1: 00= 00000000000000 DR2: 0000000000000000=0A[ 51.922830] DR3: 0000000000000000= DR6: 00000000ffff0ff0 DR7: 0000000000000400=0A[ 51.944203] Process swapp= er (pid: 0, threadinfo ffffffff81760000, task ffffffff81767600)=0A[ 51.96= 8434] Stack:=0A[ 51.974468] ffff88002da03f28 ffffffff810b98c6 ffffffff81= 988740 ffffffff810271d0=0A[ 51.996257] <0> 000000000000cf00 0000000000032= f60 000000000000ed40 ffffffff81988748=0A[ 52.019448] <0> ffff88033847d300= ffffffff81988740 ffffffff81988740 0000000000000015=0A[ 52.043188] Call T= race:=0A[ 52.050522] =0A[ 52.056865] [] __ipi= pe_sync_stage+0x206/0x25c=0A[ 52.074859] [] ? smp_irq_= move_cleanup_interrupt+0x0/0x130=0A[ 52.095971] [] __i= pipe_walk_pipeline+0x100/0x110=0A[ 52.114744] [] __ipi= pe_handle_irq+0x134/0x320=0A[ 52.132737] [] ? __ipipe_= ack_fasteoi_irq+0x0/0x20=0A[ 52.151772] [] common_inte= rrupt+0x13/0x2c=0A[ 52.168720] =0A[ 52.175065] [] ? __ipipe_halt_root+0x2b/0x40=0A[ 52.192799] [] ?= default_idle+0x3d/0x90=0A[ 52.209231] [] ? cpu_idle+0= xc4/0x120=0A[ 52.224885] [] ? rest_init+0x6b/0x80=0A[ = 52.240538] [] ? start_kernel+0x43a/0x446=0A[ 52.2574= 89] [] ? x86_64_start_reservations+0x125/0x129=0A[ 52.= 277822] [] ? x86_64_start_kernel+0xe4/0xeb=0A[ 52.2960= 73] Code: 42 48 c9 c3 66 90 55 48 89 e5 0f 1f 44 00 00 8d 87 00 ef ff ff 83= f8 1f 77 0c 8d 87 ea ef ff ff c9 c3 0f 1f 40 00 e8 bb ff ff ff <0f> b6 40 = 1c c9 c3 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41 55 =0A[ 52.355744] RIP= [] __ipipe_get_ioapic_irq_vector+0x25/0x30=0A[ 52.377= 170] RSP =0A[ 52.387625] CR2: 000000000000001c=0A[ 5= 2.397559] ---[ end trace fe2daa7b4f437364 ]---=0A[ 52.411388] Kernel pani= c - not syncing: Attempted to kill the idle task!=0A[ 52.431460] Pid: 0, = comm: swapper Tainted: G D 2.6.32.20-adeos #1=0A[ 52.451795] Call= Trace:=0A[ 52.459125] [] panic+0x78/0x134=0A[ = 52.475352] [] do_exit+0x760/0x850=0A[ 52.490485] [<= ffffffff8154e3b2>] oops_end+0xb2/0x100=0A[ 52.505617] [] no_context+0xf2/0x260=0A[ 52.521268] [] __bad_area_= nosemaphore+0x125/0x1e0=0A[ 52.540302] [] ? scsi_softi= rq_done+0x145/0x170=0A[ 52.558553] [] bad_area_nosemap= hore+0x13/0x20=0A[ 52.576546] [] do_page_fault+0x2eb/0= x3c0=0A[ 52.593240] [] __ipipe_handle_exception+0x140/= 0x3d0=0A[ 52.612791] [] page_fault+0x26/0x70=0A[ 52.= 628184] [] ? __ipipe_get_ioapic_irq_vector+0x25/0x30=0A[= 52.649037] [] ? __ipipe_get_ioapic_irq_vector+0x25/0x= 30=0A[ 52.669889] [] __ipipe_sync_stage+0x206/0x25c=0A= [ 52.687884] [] ? smp_irq_move_cleanup_interrupt+0x0/0= x130=0A[ 52.708994] [] __ipipe_walk_pipeline+0x100/0x1= 10=0A[ 52.727767] [] __ipipe_handle_irq+0x134/0x320=0A= [ 52.745761] [] ? __ipipe_ack_fasteoi_irq+0x0/0x20=0A[= 52.764795] [] common_interrupt+0x13/0x2c=0A[ 52.781= 744] [] ? __ipipe_halt_root+0x2b/0x40=0A[ 52.80= 1351] [] ? default_idle+0x3d/0x90=0A[ 52.817782] [] ? cpu_idle+0xc4/0x120=0A[ 52.833435] [] ? rest_init+0x6b/0x80=0A[ 52.849087] [] ? start_ker= nel+0x43a/0x446=0A[ 52.866041] [] ? x86_64_start_reser= vations+0x125/0x129=0A[ 52.886374] [] ? x86_64_start_k= ernel+0xe4/0xeb=0ADoes somebody know what is wrong? regards, =A0=A0=A0=A0 franz --- Gilles Chanteperdrix schrieb am Di, = 3.5.2011: Von: Gilles Chanteperdrix Betreff: Re: [Xenomai-help] Problem with the configuration of new system An: "Franz Engel" CC: xenomai@xenomai.org Datum: Dienstag, 3. Mai, 2011 19:50 Uhr On 05/03/2011 07:45 PM, Franz Engel wrote: > Hello, >=20 > I've a problem with my new system. I already patched the system with > adeos and also with the preperation skript of Xenomai. For the first > configuration I use a kernel-configuration where xenomai is disabled > and only ipipe is enabled. Even when I start the system it boots > correct and it runs a few seconds (long enough to recognize the > network), then the system freezs and two leds of the keyboard begins > blinking. This is a kernel oops. Please send us the kernel logs. --=20 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0= =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 Gilles. --0-474610793-1304573443=:85461 Content-Type: text/html; charset=iso-8859-1 Content-Transfer-Encoding: quoted-printable
Hi,

After some days to learn how I rec= eive logs on another PC, here is my log. The problem is that the PC hangs a= fter a few seconds.
=0A=0A=0A=09=0A=09=0A=09=0A=09