All of lore.kernel.org
 help / color / mirror / Atom feed
From: CrazyCat <crazycat69@yandex.ru>
To: Antti Palosaari <crope@iki.fi>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>,
	Manu Abraham <manu@linuxtv.org>,
	"linux-media@vger.kernel.org" <linux-media@vger.kernel.org>
Subject: Re: [PATCH] DVB-S2 multistream support
Date: Sun, 12 Aug 2012 21:33:23 +0300	[thread overview]
Message-ID: <2171791344796403@web4d.yandex.ru> (raw)
In-Reply-To: <5026F209.4030604@iki.fi>

Ok, done :) Look like DTV_DVBT2_PLP_ID not implemented for CXD2820r ?

12.08.2012, 03:00, "Antti Palosaari" <crope@iki.fi>:
> We asked you to merge isdbs_ts_id, dvbt2_plp_id and dvbs2_mis_id to one
> as those are logically same thing from the user-point of view.
> Technically those differs, but that is userspace API so underlying
> technique should not matter.
>
> It is some more work for you, but it should not be such big issue you
> cannot do. So please use few hours and merge all those. I think correct
> name is DTV_STREAM_ID. So remove isdbs_ts_id, dvbt2_plp_id and
> dvbs2_mis_id. Add new variable stream_id. As DTV_ISDBS_TS_ID and
> DTV_DVBT2_PLP_ID already exists you should make some logic those could
> be still used.

Signed-off-by: Evgeny Plehov <EvgenyPlehov@ukr.net>
diff --git a/include/linux/dvb/frontend.h b/include/linux/dvb/frontend.h
index f50d405..32d51bc 100644
--- a/include/linux/dvb/frontend.h
+++ b/include/linux/dvb/frontend.h
@@ -62,6 +62,7 @@ typedef enum fe_caps {
 	FE_CAN_8VSB			= 0x200000,
 	FE_CAN_16VSB			= 0x400000,
 	FE_HAS_EXTENDED_CAPS		= 0x800000,   /* We need more bitspace for newer APIs, indicate this. */
+	FE_CAN_MULTISTREAM		= 0x4000000,  /* frontend supports DVB-S2 multistream filtering */
 	FE_CAN_TURBO_FEC		= 0x8000000,  /* frontend supports "turbo fec modulation" */
 	FE_CAN_2G_MODULATION		= 0x10000000, /* frontend supports "2nd generation modulation" (DVB-S2) */
 	FE_NEEDS_BENDING		= 0x20000000, /* not supported anymore, don't use (frontend requires frequency bending) */
@@ -314,9 +315,10 @@ struct dvb_frontend_event {
 
 #define DTV_ISDBT_LAYER_ENABLED	41
 
-#define DTV_ISDBS_TS_ID		42
-
-#define DTV_DVBT2_PLP_ID	43
+#define DTV_STREAM_ID		42
+#define DTV_ISDBS_TS_ID		DTV_STREAM_ID
+#define DTV_DVBT2_PLP_ID	DTV_STREAM_ID
+#define DTV_DVBS2_MIS_ID	DTV_STREAM_ID
 
 #define DTV_ENUM_DELSYS		44
 
diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c
index aebcdf2..8fb7eac 100644
--- a/drivers/media/dvb/dvb-core/dvb_frontend.c
+++ b/drivers/media/dvb/dvb-core/dvb_frontend.c
@@ -946,8 +946,7 @@ static int dvb_frontend_clear_cache(struct dvb_frontend *fe)
 		c->layer[i].segment_count = 0;
 	}
 
-	c->isdbs_ts_id = 0;
-	c->dvbt2_plp_id = 0;
+	c->stream_id = -1;
 
 	switch (c->delivery_system) {
 	case SYS_DVBS:
@@ -1017,8 +1016,7 @@ static struct dtv_cmds_h dtv_cmds[DTV_MAX_COMMAND + 1] = {
 	_DTV_CMD(DTV_ISDBT_LAYERC_SEGMENT_COUNT, 1, 0),
 	_DTV_CMD(DTV_ISDBT_LAYERC_TIME_INTERLEAVING, 1, 0),
 
-	_DTV_CMD(DTV_ISDBS_TS_ID, 1, 0),
-	_DTV_CMD(DTV_DVBT2_PLP_ID, 1, 0),
+	_DTV_CMD(DTV_STREAM_ID, 1, 0),
 
 	/* Get */
 	_DTV_CMD(DTV_DISEQC_SLAVE_REPLY, 0, 1),
@@ -1382,11 +1380,9 @@ static int dtv_property_process_get(struct dvb_frontend *fe,
 	case DTV_ISDBT_LAYERC_TIME_INTERLEAVING:
 		tvp->u.data = c->layer[2].interleaving;
 		break;
-	case DTV_ISDBS_TS_ID:
-		tvp->u.data = c->isdbs_ts_id;
-		break;
-	case DTV_DVBT2_PLP_ID:
-		tvp->u.data = c->dvbt2_plp_id;
+
+	case DTV_STREAM_ID:
+		tvp->u.data = c->stream_id;
 		break;
 
 	/* ATSC-MH */
@@ -1771,11 +1767,8 @@ static int dtv_property_process_set(struct dvb_frontend *fe,
 	case DTV_ISDBT_LAYERC_TIME_INTERLEAVING:
 		c->layer[2].interleaving = tvp->u.data;
 		break;
-	case DTV_ISDBS_TS_ID:
-		c->isdbs_ts_id = tvp->u.data;
-		break;
-	case DTV_DVBT2_PLP_ID:
-		c->dvbt2_plp_id = tvp->u.data;
+	case DTV_STREAM_ID:
+		c->stream_id = tvp->u.data;
 		break;
 
 	/* ATSC-MH */
diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.h b/drivers/media/dvb/dvb-core/dvb_frontend.h
index 7c64c09..bec0cda 100644
--- a/drivers/media/dvb/dvb-core/dvb_frontend.h
+++ b/drivers/media/dvb/dvb-core/dvb_frontend.h
@@ -368,11 +368,8 @@ struct dtv_frontend_properties {
 	    u8			interleaving;
 	} layer[3];
 
-	/* ISDB-T specifics */
-	u32			isdbs_ts_id;
-
-	/* DVB-T2 specifics */
-	u32                     dvbt2_plp_id;
+	/* Multistream specifics */
+	u32			stream_id;
 
 	/* ATSC-MH specifics */
 	u8			atscmh_fic_ver;
diff --git a/drivers/media/dvb/frontends/stv090x.c b/drivers/media/dvb/frontends/stv090x.c
index ea86a56..13caec0 100644
--- a/drivers/media/dvb/frontends/stv090x.c
+++ b/drivers/media/dvb/frontends/stv090x.c
@@ -3425,6 +3425,33 @@ err:
 	return -1;
 }
 
+static int stv090x_set_mis(struct stv090x_state *state, int mis)
+{
+	u32 reg;
+
+	if (mis < 0 || mis > 255) {
+		dprintk(FE_DEBUG, 1, "Disable MIS filtering");
+		reg = STV090x_READ_DEMOD(state, PDELCTRL1);
+		STV090x_SETFIELD_Px(reg, FILTER_EN_FIELD, 0x00);
+		if (STV090x_WRITE_DEMOD(state, PDELCTRL1, reg) < 0)
+			goto err;
+	} else {
+		dprintk(FE_DEBUG, 1, "Enable MIS filtering - %d", mis);
+		reg = STV090x_READ_DEMOD(state, PDELCTRL1);
+		STV090x_SETFIELD_Px(reg, FILTER_EN_FIELD, 0x01);
+		if (STV090x_WRITE_DEMOD(state, PDELCTRL1, reg) < 0)
+			goto err;
+		if (STV090x_WRITE_DEMOD(state, ISIENTRY, mis) < 0)
+			goto err;
+		if (STV090x_WRITE_DEMOD(state, ISIBITENA, 0xff) < 0)
+			goto err;
+	}
+	return 0;
+err:
+	dprintk(FE_ERROR, 1, "I/O error");
+	return -1;
+}
+
 static enum dvbfe_search stv090x_search(struct dvb_frontend *fe)
 {
 	struct stv090x_state *state = fe->demodulator_priv;
@@ -3447,6 +3474,8 @@ static enum dvbfe_search stv090x_search(struct dvb_frontend *fe)
 		state->search_range = 5000000;
 	}
 
+	stv090x_set_mis(state, props->stream_id);
+
 	if (stv090x_algo(state) == STV090x_RANGEOK) {
 		dprintk(FE_DEBUG, 1, "Search success!");
 		return DVBFE_ALGO_SEARCH_SUCCESS;
@@ -4798,6 +4827,9 @@ struct dvb_frontend *stv090x_attach(const struct stv090x_config *config,
 		}
 	}
 
+	if (state->internal->dev_ver >= 0x30)
+		state->frontend.ops.info.caps |= FE_CAN_MULTISTREAM;
+
 	/* workaround for stuck DiSEqC output */
 	if (config->diseqc_envelope_mode)
 		stv090x_send_diseqc_burst(&state->frontend, SEC_MINI_A);

  reply	other threads:[~2012-08-12 18:33 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-07-13 23:15 [PATCH] DVB-S2 multistream support CrazyCat
2012-08-10 22:12 ` Mauro Carvalho Chehab
2012-08-11  0:07   ` Manu Abraham
2012-08-11  0:14   ` Antti Palosaari
2012-08-11  0:31     ` Manu Abraham
2012-08-11  1:07       ` Antti Palosaari
2012-08-11  1:20         ` Manu Abraham
2012-08-11  1:22         ` CrazyCat
2012-08-11 22:55   ` CrazyCat
2012-08-12  0:00     ` Antti Palosaari
2012-08-12 18:33       ` CrazyCat [this message]
2012-08-12 18:50         ` Antti Palosaari
2012-08-12 19:12           ` Manu Abraham
2012-08-13 18:57           ` Mauro Carvalho Chehab
  -- strict thread matches above, loose matches on Subject: below --
2012-07-13 23:11 [PATCH]DVB-S2 " CrazyCat

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2171791344796403@web4d.yandex.ru \
    --to=crazycat69@yandex.ru \
    --cc=crope@iki.fi \
    --cc=linux-media@vger.kernel.org \
    --cc=manu@linuxtv.org \
    --cc=mchehab@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.