From mboxrd@z Thu Jan 1 00:00:00 1970 Date: Fri, 27 Aug 2004 16:04:07 +0200 (MEST) From: "Patrick Huesmann" To: linuxppc-embedded@lists.linuxppc.org MIME-Version: 1.0 References: <17232.1093615319@www63.gmx.net> Subject: Re: Kernel oops when initializing ethernet driver Message-ID: <21930.1093615447@www63.gmx.net> Content-Type: text/plain; charset="us-ascii" Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: Hi, > > I don't even know if we have the VHDL source - the peripherals are > > ready-to-go logic units that are just inserted in the FPGA design. > > > Do you use EDK to build your design? Yes. > Is the physical address in your log the one you expect? Yes. Apparently, the hardware guy disabled the ethernet controller's "S/W reset" option in the EDK. This explains why the PPC got no ACK from OPB when writing to the reset register, and threw the data check exception. I hope that this problem is solved, when we enable that option. Thanks again to all who replied, Patrick ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/