Re: [B.A.T.M.A.N.] Bad link quality if routers are connected by 2 interfaces

[Clemens John <clemens-john@gmx.de>]

[-- Attachment #1: Type: text/plain, Size: 903 bytes --]

Am Freitag, 8. November 2013, 10:51:26 schrieben Sie:
> However, a2:f3:c1:5b:54:a6 is used as Ethernet source address for sending in
> both eth0.3 and wlan0-1 dumps. Is it possible that there is a mac address
> conflict?

Hi Simon,

this seems to be the right hint. I checked this and we really had a mac 
address conflict on the interfaces wlan0-1 and eth0.3 we used for meshing. This 
was due to a fix for some mac adress problem in our firmware that seems to be 
outdated now.

On my router the problem is fixed. We will check our other hardware also but I 
think we have a good chance that solving the mac adress conflicts will also 
solve this link quality problem. If not, I´ll ask again.

Thank you!
Clemens
-- 
#Clemens John <clemens-john@gmx.de>
#GnuPG:
Identifier: 0xD92F6BA5
Fingerprint: 1D6D 3EC6 C80F C1D4 CE1F 1133 6607 476C 0DB6 96A3
   Always encrypt your messages

[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 198 bytes --]