[U-Boot] saveenv command erases flash u-boot

[rudresh <rudresh.tk@lntemsys.com>]

same u-boot-1.3.0 working in other customize MPC8313 board with some
different peripherals, NOR flash of 16MB is same in both the case .. but the
MPC8313  evaluation board having 256MB NAND flash.. why not u-boot-1.3.0 is
not working in evaluation board..


wd wrote:
> 
> Dear rudresh,
> 
> In message <22156928.post@talk.nabble.com> you wrote:
>> 
>> i'm using u-boot -1.3.0 in MPC8313 evaluation board, it having a NAND ,
>> NOR
>> Flash , u-boot stored in NOR flash. when i do the saveenv , reset command
>> the u-boot is erased. i'm not able to fix  this issue.  help me to fix
>> this
>> issue
> 
> 1.3.0 is extremely old. Please use current code instead
> (v2009.03-rc1).  Chances are good that the problem has long been
> fixed.
> 
> Best regards,
> 
> Wolfgang Denk
> 
> -- 
> DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
> What is wanted is not the will to believe,  but the will to find out,
> which is the exact opposite.
> 		        -- Bertrand Russell, "Skeptical Essays", 1928
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
> 
> 

-- 
View this message in context: http://www.nabble.com/saveenv-command-erases-flash-u-boot-tp22156928p22160018.html
Sent from the Uboot - Users mailing list archive at Nabble.com.